Is It Safe to Leave Your Car at a 4S Shop?

What are the causes of spontaneous combustion in moving vehicles?

The causes of spontaneous combustion in moving vehicles are as follows: 1. Issues with the vehicle's fuel system: Severe collisions or damage to the chassis can compromise the fuel lines, leading to loose connections, fuel leaks, and a significantly high risk of spontaneous combustion. Alternatively, if the vehicle is too old, the fuel lines may have deteriorated, with sludge buildup making heat dissipation difficult. 2. Aging of vehicle wiring: During modifications, both the electrical and fuel systems of the vehicle may be altered. If the technician's skill level is inadequate, it can leave behind safety hazards. 3. High temperatures causing combustion: Placing flammable or explosive items inside the vehicle, such as perfumes, hair sprays, or lighters. 4. Vehicle impact: After a car accident, sparks generated from the impact can trigger spontaneous combustion. 5. Excessive buildup of engine sludge: High temperatures in summer combined with the engine's heat can cause sludge to spontaneously combust due to the elevated temperatures.

15

0

Share

What does the engine fault indicator light mean?

The illumination of the engine fault indicator light indicates a performance issue with electronic components. Below are explanations regarding engine faults: 1. Sensor malfunction: The sensors mentioned here include those for coolant temperature, crankshaft position, air flow, intake air temperature, and oxygen. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot function accurately. 2. Maintenance issues: Poor engine maintenance is the most common cause of the engine fault light coming on. 3. Fuel and oil quality problems: Manufacturers typically recommend specific fuel grades and types of engine oil for use. If these recommendations are not followed over time, it can lead to engine wear.

12

4

Share

What are the consequences of not changing manual transmission fluid?

The impacts of not changing manual transmission fluid are as follows: 1. Reduced oil pressure: This causes the transmission fluid to thicken, lowering oil pressure and hindering internal heat dissipation, leading to excessively high oil temperatures. Consequently, the lifespan of both the transmission and drivetrain components will be shortened. 2. Slippage phenomenon: Failure to change transmission fluid may result in weak acceleration during startup and frequent slippage while driving. 3. Accelerated wear: Prolonged neglect of transmission fluid changes leads to deterioration and evaporation under high-speed and high-temperature conditions, causing rapid component wear and internal transmission damage. Additional impacts include: 1. Impaired vehicle performance: Unchanged transmission fluid affects car performance. During transmission operation, friction between metal components generates debris and impurities. Over time, the fluid becomes contaminated, affecting gear shifts, clogging oil passages, resulting in rough shifting, reduced transmission efficiency, sluggish acceleration, and increased fuel consumption to some extent. Degraded transmission fluid can cause inadequate lubrication, accelerated part wear, and component corrosion, thereby shortening the transmission's service life. 2. Regular inspection required: Transmission fluid should be inspected periodically, typically replaced every approximately 80,000 kilometers. Different transmission designs and performance characteristics require specific viscosity indexes and lubrication properties in transmission fluids. Using incorrect transmission fluid may cause jerky or rough transmission operation during driving.

18

2

Share

What is the average fuel consumption of the Buick Envision?

The Buick Envision has an average fuel consumption of around 8.5 liters per 100 kilometers. The fuel consumption of the Buick Envision 1.5T varies depending on actual driving conditions, with different usage scenarios resulting in different fuel consumption levels. Relevant information about fuel consumption is as follows: 1. Introduction: Fuel consumption generally refers to constant-speed fuel consumption, which is the vehicle's fuel consumption per 100 kilometers obtained in standardized constant-speed driving fuel consumption tests for certain types of vehicles. 2. Testing Methods: Tests can be conducted on roads or on chassis dynamometers, and the fuel consumption per 100 kilometers is then calculated using the "flow meter method" or "carbon balance method."

19

0

Share

Where is the GPS usually installed?

There are several common locations for installing an in-car GPS: 1. On the vehicle's A-pillar, B-pillar, or C-pillar: These are the most common locations. 2. Inside the engine compartment: This is the most concealed location. 3. Around the dashboard: This is the most suitable location. 4. Key points for GPS installation: (1) To prevent theft or tampering, the device should be placed in a concealed location. (2) Avoid placing it near sources of interference, such as wireless backup radars, anti-theft devices, or other in-car communication equipment. (3) The device can be secured using zip ties or strong double-sided foam tape. (4) The device contains GSM and GPS antennas, so it should be installed with the front side facing upwards (toward the sky).

5

1

Share

Where is the child lock on the Geely Emgrand?

Geely Emgrand's child door lock is located on the rear door locks of the vehicle. Below is relevant information about the child lock: 1. Open the rear door and you will find a small lever (safety mechanism) below the door lock. Push it towards the end with the child icon, then close the door. Now the door cannot be opened from inside the vehicle and can only be opened from outside. 2. Its function is to prevent active and unaware children from opening the door while the vehicle is moving, which could lead to danger. In this case, the door can only be opened by an adult from outside after the vehicle stops. 3. If the Emgrand's rear door cannot be opened from inside but can be opened from outside, it's highly likely that the child safety lock is engaged. This happens when rear passengers accidentally activate the safety mechanism while getting in or out of the vehicle. Simply reset it to normal position.

17

4

Share

Is It Safe to Leave Your Car at a 4S Shop?

What are the causes of spontaneous combustion in moving vehicles?

What does the engine fault indicator light mean?

What are the consequences of not changing manual transmission fluid?

What is the average fuel consumption of the Buick Envision?

Where is the GPS usually installed?

Where is the child lock on the Geely Emgrand?

What Causes Inaccurate Fuel Gauge Readings in Cars?

Do I Need to Wait for the Red Light When Making a U-Turn?

Why Does Fog Form on the Car Windows When It Rains?

Is the Roewe RX5 equipped with a dry or wet dual-clutch transmission?