Is It Safe to Leave a Walkie-Talkie in the Car During Summer?

2 Answers
VonJuliette
07/28/25 9:19pm
It is not safe to leave a walkie-talkie in the car during summer. Car Walkie-Talkie: A car walkie-talkie is a communication tool installed in the vehicle. It features selective calling, allowing two individuals to communicate privately by dialing the other party's ID number. The car walkie-talkie has a transmission power of over 25W, with no radiation during calls, ensuring no harm to the human body. Components of a Car Walkie-Talkie: The main components of a car walkie-talkie include: the casing, main unit, battery, belt clip, antenna, headphones, and other accessories. Car walkie-talkies are primarily used in industries such as public security, civil aviation, transportation, water conservancy, railways, manufacturing, construction, and services. They facilitate communication and command coordination among team members, enhancing communication efficiency and the ability to respond quickly to emergencies.
Was this review help?
14
3
Share
LeEliza
08/12/25 1:58am
I think this issue is very important. In summer, when a car is parked under the sun, the temperature inside can instantly soar to over 50 degrees Celsius. Especially if the walkie-talkie is left on the dashboard or seat, it's practically a disaster scene. Overheating can cause the battery to expand and leak, not only damaging the device but also potentially leading to spontaneous combustion. I've seen many friends' walkie-talkies get ruined this way, even causing small fires. For safety, it's best to take it out and put it in a bag or carry it with you every time you leave the car. Developing this habit can save a lot of trouble and repair costs. If it's really inconvenient, try removing the battery and storing it separately in a cool place to avoid prolonged exposure to high temperatures. In short, don't prioritize convenience over safety—safety should always come first.
Was this review help?
13
2
Share
Expand All
More Forum Discussions

Where is the oil dipstick for the Audi A8?

The oil dipstick for the Audi A8 is located next to the engine of the Audi A8. Here are the specific details: 1. Meaning of the dipstick scale: The function of the oil dipstick is to measure the static height of the oil level, thereby reflecting whether the engine oil volume is within a reasonable range. A standard oil dipstick will have clear upper and lower limits, and it is sufficient to ensure that the detected oil level is between these two marks. 2. Purpose of the oil dipstick: The engine lubrication system generally includes an oil storage system, oil distribution system, and oil indication system. In the airworthiness standards for transport aircraft, it is required that an oil quantity indicator must have a dipstick or equivalent device to indicate the oil quantity in each oil tank. The dipstick is a simple-structured liquid level gauge that directly displays the oil level height in the oil tank.
14
4
Share

Where is the button for the rear sunshade in the Audi A8?

The sunshade can be operated using the window lift switches on the driver's door, the window lift switches on the rear doors, and the buttons on the rear seat headliner. Here are the specific details: 1. Introduction to Audi: Audi (Audi) is a luxury car brand under Audi AG, a subsidiary of the Volkswagen Group in Germany. As a representative of high technical standards, quality, innovation capability, and classic car models, Audi is one of the leading automotive brands. The company's headquarters are located in Ingolstadt, Germany, and it has subsidiaries in many countries, including China. 2. Precautions for using the rear sunshade: This function can only provide partial shading and cannot completely block light from the rear. When using it, ensure there are no items obstructing the sunshade's movement below the rear windshield to avoid damage. The rear windshield sunshade may somewhat affect the driver's view of the rear through the interior rearview mirror. For driving safety, please do not use the rear windshield sunshade at night.
9
3
Share

Will Water Entering the Car Window Cause Harm?

Summer thunderstorms can catch you off guard, and many car owners forget to close their windows, leading to water entering the car. If water enters the car, it can have a significant impact on the vehicle. 1. If the situation is severe, the electronic modules inside the car may be submerged in water. If not handled promptly and properly, it can corrode the wiring, plugs, and internal circuit boards, causing vehicle alarms and functional failures. In such cases, avoid turning on electronic devices if possible. Use a mechanical key to open the car door and immediately call for a tow truck to take the vehicle to a repair facility. 2. If the situation is not too severe and there is no large amount of water on the floor mats, it is recommended to remove the vehicle's battery to prevent electrochemical corrosion, which could worsen rusting of the modules and plugs. Take out the floor mats and seat covers, remove them for cleaning and drying to prevent odors later on. After drying, it is advisable to perform a comprehensive disinfection of the car. Water from rain can breed many germs, so disinfection is necessary. In daily use, always remember to close all windows before leaving the car to develop the habit of closing windows.
3
5
Share

Why is the car vibrating severely?

The reasons for severe car vibration: 1. Severe engine carbon deposits: After driving for a certain mileage, the throttle valve may not close properly or the motor may get stuck due to excessive dirt, causing high engine idle speed. The carbon deposits generated during this process lead to vehicle vibration, especially when starting the car, the engine will vibrate more severely than normal. It is necessary to clean the carbon deposits in time. 2. Ignition system problems: When starting a cold engine, it requires a richer air-fuel mixture, which demands higher ignition energy. If the spark plug gap is too large, or the ignition coil and high-voltage coil are aged, the ignition energy may decrease, causing the car body to shake. The spark plugs and cylinder wires should be checked and adjusted or replaced if necessary. 3. Unstable oil pressure: Abnormal fuel pump supply pressure or incorrect intake pressure sensor readings can also cause car body vibration. The owner should remember to check the oil pressure and replace parts if necessary. 4. Shock absorption system: The engine mount is actually the shock absorption system of the engine. If there is a problem with the engine mount, these vibrations will be transmitted to the steering wheel and the interior of the car, causing vibration at idle speed.
16
4
Share

What is the reason for no sound in CarPlay navigation when connected?

It may be due to a disconnection or signal loss. Here is the relevant introduction: CarPlay: What is CarPlay? It is an in-car system launched by Apple Inc. in the United States. This in-car system can connect with a smartphone, offering great convenience. It can be connected either via a wired or wireless method, allowing the smartphone's screen to be mirrored onto the car's central control screen and enabling the use of related functions on the phone. It is an excellent in-car system. Solution: You need to disconnect the phone from the car's system and reconnect them. After disconnecting the phone and the car's system, restart both the phone and the car's system, then reconnect them. Alternatively, reset the car's system to factory settings and then reconnect it with the phone.
1
2
Share

Is the engine speed not allowed to exceed 2000 rpm in Subject 3?

Engine speed should be kept below 2000 rpm, exceeding which will result in a failing judgment. Here are the relevant details: Introduction: Engine speed exceeding 2000 rpm is considered low-gear high-speed. During the test, engine speed should be maintained around 1500 rpm. If the engine reaches around 1800 rpm, it indicates the need to shift up. Excessive fuel consumption: Failing to shift gears when exceeding 2000 rpm in low-speed gears constitutes lugging the engine. Low-gear high-lug operation forces the engine to run at excessively high speeds. Each engine has its specific speed and power characteristics. Once it exceeds the optimal operating range, fuel consumption increases sharply. Additionally, ultra-high-speed operation places excessive stress on engine components.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.