Is it safe to charge at an outdoor charging station in the rain?

1 Answers
McReagan
07/24/25 5:11pm
Charging at an outdoor charging station in the rain is very safe. Here is relevant information: 1. Charging port standards: Manufacturers have strict standards for charging components and interfaces, generally achieving IPX6-IPX7 waterproof ratings. This means that under light rain conditions, there will be no damage to components or safety issues. 2. Parking position: When parking, try to choose a higher ground position. If parked in a low-lying area, prolonged water accumulation may cause the battery or charging port to be submerged in water. Before charging, check the charging gun to ensure there is no accumulated water or debris inside, and make sure the charging gun and charging port can fully contact for normal charging.
Was this review help?
6
2
Share
More Forum Discussions

What are the body dimensions of the Edge?

The body dimensions of the Edge are: length 4585mm, width 1882mm, height 1688mm, wheelbase 2710mm, and minimum ground clearance 170mm. Below is more information about the Edge: 1. Taking the new Edge as an example. It belongs to the compact SUV category, with a fuel tank capacity of 63 liters and a curb weight of 1585kg. 2. The new Edge features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 248ps, maximum power of 182kw, maximum torque of 393nm, and is paired with an 8-speed automatic transmission.
2
4
Share

What are the differences between Volkswagen Bora and Lavida?

The differences between Volkswagen Bora and Lavida are: 1. Different dimensions: The length, width, and height of the Volkswagen Bora are 4663mm, 1815mm, and 1462mm respectively; while those of the Lavida are 4670mm, 1806mm, and 1474mm respectively. 2. Different trunk volumes: The trunk volume of the Volkswagen Bora is 506 liters; whereas the Lavida's trunk volume is 510 liters. Both the Volkswagen Bora and Lavida feature front-wheel drive, MacPherson strut front suspension, torsion beam rear suspension, electric power steering, and a monocoque body structure.
6
5
Share

How to reset the tire pressure monitoring light on a Changan CS75 Plus?

First, press the one-touch start button on the center console to start the vehicle's engine; otherwise, the tire pressure cannot be reset. After starting the engine, press the illustrated button on the left side of the steering wheel to enter the tire pressure setting interface, then select the corresponding button on the instrument panel. After selecting the appropriate content button, press and hold the custom button on the right side of the steering wheel until you hear a beep, then release it. Check the vehicle's instrument panel to confirm that the tire pressure warning light has been reset.
15
0
Share

Is there 98 octane gasoline available?

As of now, major cities across the country have gas stations offering 98 octane gasoline. 98 octane gasoline refers to fuel whose octane rating is equivalent to a mixture of 98% isooctane and 2% n-heptane. Engines with high compression ratios should use high-octane gasoline; using low-octane gasoline in high-compression engines can cause abnormal combustion. Relevant information about gasoline is as follows: 1. Introduction: Gasoline is a volatile, flammable liquid hydrocarbon mixture distilled and cracked from petroleum, used as fuel. It appears as a transparent liquid, is flammable, and has a distillation range of 30°C to 220°C. 2. Key Characteristics: The important properties of gasoline include volatility, stability, anti-knock quality, corrosiveness, and cleanliness.
16
4
Share

How to Modify the Display Screen of an Old Audi Q3?

You can directly remove the plastic from the original car screen by hand. Carefully take off the air vents in front of the dashboard to avoid damage. Use a specialized wrench to remove the two fixing screws on the main unit, then detach the original car main unit. Connect two CAN bus lines using professional clips. Install the control system behind the original car screen. Add a touch panel to the LCD screen and connect the Audi-specific control system in series to the original car's cable socket. Insert the corresponding fiber optic cable into the empty fiber optic socket at the back of the original car main unit. After setting up the control system and touch screen, reinstall the original car screen.
11
1
Share

Should the sedan stabilizer bar be tightened very tightly?

Automobile stabilizer bars need to be tightened; otherwise, they can easily loosen when the car encounters bumps during driving. The function of the stabilizer bar is to generate anti-roll resistance (Roll Resistance) to inhibit body roll when the horizontal heights of the left and right wheels are different, preventing the bar from twisting. The stabilizer bars used in sedans are installed in different parts and can be categorized into: 1. Chassis reinforcement stabilizer bar; 2. Rear axle suspension reinforcement stabilizer bar; 3. Front crossmember stabilizer bar; 4. Toe-in stabilizer bar; 5. Front shock absorber tower top stabilizer bar; 6. Front lower control arm stabilizer bar; 7. Rear shock absorber tower top stabilizer bar.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.