Is It Qualified If the Wheels Don't Cross the Line but the Body Exceeds the Line During Reverse Parking?

2 Answers
VonAlina
09/04/25 3:56am
In the Subject 2 reverse parking test, if any part of the left or right side of the vehicle body exceeds the line, 100 points will be deducted, resulting in a failure. Definition of Reverse Parking: Reverse parking is a mandatory test item for obtaining a small car driver's license. It assesses the driver's ability to maneuver the vehicle within a designated area. Reverse parking is one of the evaluation points in the driver's test, which involves correctly reversing the vehicle into the garage from both sides while in motion. Methods of Reverse Parking: There are three most common types of reverse parking. The first is the "non"-shaped reverse parking, commonly seen in large parking lots. The second is the roadside "one"-shaped reverse parking, also known as parallel parking. The third is the less common diagonal reverse parking. 70% of driving students find parallel parking more challenging.
Was this review help?
20
2
Share
JaydenFitz
09/16/25 5:04am
Last week, while accompanying my friend to practice for the Subject 2 driving test, we encountered a situation where the car body crossed the line during reverse parking. The instructor immediately pointed out that this would result in an automatic failure, as per the exam rules, both the car body crossing the line and the wheels pressing the line are considered unqualified. A car body crossing the line indicates that the entire vehicle is misaligned, which in real driving scenarios could easily lead to scraping against adjacent vehicles or obstacles. During the test, electronic sensors scan the entire contour of the car body; even if just the bumper exceeds the parking line, the system will deem it a failure. The key is to observe the distance between the car body and the boundary line through the rearview mirrors, rather than just focusing on the wheel position. Regular practice should focus on developing a sense of overall spatial awareness. When reversing slowly, if you notice the car body is not aligned, adjust the direction promptly. The biggest fear during the exam is nervousness leading to improper movements, so it's advisable to simulate the test multiple times beforehand to get a feel for it.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

Where is the child lock located on the Mercedes-Benz C-Class?

The child lock on the Mercedes-Benz C-Class is located on the side of the rear doors and can only be seen when the door is opened. Once locked, the rear doors cannot be opened from the inside and can only be opened from the outside. Definition of child lock: The car child lock, also known as the door lock child safety feature, is set on the rear door locks. When the rear door is opened, there is a small lever (safety mechanism) below the door lock. By sliding the lever towards the end with the child icon and then closing the door, the door cannot be opened from the inside and can only be opened from the outside. Function of the child lock: Its purpose is to prevent active and unaware children from opening the door while the car is moving, thereby avoiding danger. In this case, the door can only be opened by an adult from the outside after the car has stopped. If the rear door cannot be opened from the inside but can be opened from the outside, it is highly likely that the child lock is engaged. This happens when passengers in the rear seat accidentally activate the safety mechanism while getting in or out of the car. Simply reset it to its original position.
11
3
Share

What is the reason for the Qoros 3 indicating an overheating steering system?

Steering system overheating is caused by an issue with the control valve located below the steering wheel in the hydraulic power steering system. Classification of steering systems: Mechanical hydraulic power steering system, electro-hydraulic power steering system, and electric power steering system. The use of different power steering systems has varying impacts on the safety, comfort, and economy of vehicle operation. Causes of steering system overheating: An issue with the control valve below the steering wheel in the hydraulic power steering system. In a constant-flow hydraulic control system, this causes the power steering pump to work under pressure for extended periods, leading to overheating of the steering gear. Additionally, prolonged operation of the hydraulic pump reduces its service life.
10
1
Share

What are the reasons for the sudden failure of the clutch in the Baojun 730?

Baojun 730 clutch suddenly fails due to lack of lubrication in the actuating mechanism, transmission issues, or excessive wear. Lack of lubrication in the actuating mechanism: This occurs because the operating mechanism of the clutch system lacks lubrication, resulting in insufficient clutch travel and abnormal clutch return. Check the transmission: If abnormal noises persist after lubrication, this may indicate a transmission malfunction, requiring a thorough inspection and repair. Excessive wear: Excessive wear of the clutch can occur if the clutch is constantly engaged, causing the release bearing to rotate at high speeds continuously, thereby reducing the bearing's lifespan.
16
4
Share

What Causes the Camry to Feel Sluggish and Lack Power When Accelerating?

Engine sluggishness and lack of power during acceleration are caused by insufficient engine power. Check for any abnormalities in the engine: If the engine feels sluggish and lacks power during acceleration, promptly inspect the engine for any abnormalities. For example, check if the engine is overheating, if the cooling system is functioning properly, and if the exhaust gas recirculation system is working correctly. Develop good driving habits: Maintaining good driving habits can help prevent the engine from feeling sluggish and lacking power. Check if the engine oil and coolant are sufficient and top them up as needed; inspect the air filter for dirt and clean or replace it in a timely manner.
2
5
Share

What are the dimensions of the Wuling Xingchen with the rear seats folded down?

The standard depth of the Wuling Xingchen's trunk is 930mm, with an extended depth of 1840mm when the rear seats are folded down. The maximum width is 1260mm, and the height is 760mm. Exterior features: The full-width taillight strip on the tailgate features a slight curvature, paired with independent rear air deflectors that are uncommon in this segment, giving the Wuling Xingchen a visually stable yet playful appearance. Interior features: The center console forms a slightly angled platform, decorated with wood-grain panels. In addition to supporting the 10.25-inch (standard 8.0-inch) touchscreen LCD, the upper section of the console's layered design conceals dual-zone air conditioning vents.
20
5
Share

What does the car trouble code P0016 mean?

Fault code P0016 indicates a correlation issue between the crankshaft position and camshaft position. The specific details are as follows: 1. Causes: The crankshaft converts the piston's up-and-down motion into rotational motion. The camshaft controls the opening and closing of the valves. The Engine Control Unit (ECU) continuously monitors the variable camshaft's timing position to check for misalignment between the camshaft and crankshaft. If this misalignment exceeds one tooth, this fault code will appear. Contaminated engine oil or a stuck variable camshaft solenoid valve may also trigger this fault code. 2. Repair method: Disconnect the battery terminals, wait a few minutes, then reconnect them and test the vehicle again.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.