Is It Prohibited to Stop While Wading Through Water?

1 Answers
VanPreston
07/30/25 3:44am
It depends on the water level. If only the tires are submerged in water, the impact is minimal. However, if the water depth reaches about half of the tire height, do not force your way through. When driving through waterlogged roads, maintain a moderate speed, use low gear for manual transmissions, and avoid sudden acceleration. Do not shift gears abruptly or make sharp turns. Vehicle Wading Depth: For most compact and small cars with low chassis, the vehicle's air intake position serves as the benchmark when passing through waterlogged roads. The air intake is designed to draw in air. If the water level exceeds the height of the air intake, a significant amount of water may be sucked into the engine, causing severe damage to the vehicle. Therefore, it is crucial to pay attention to both water depth and speed when navigating through waterlogged areas. What Happens If a Vehicle Exceeds Its Wading Depth: If the water level is higher than the vehicle's wading depth, the vehicle will not be able to pass through. Insisting on proceeding may lead to engine stalling, loss of steering control, and other issues. This situation can be quite dangerous, especially if the vehicle is moving at a high speed and suddenly loses steering control. In such cases, it is essential to immediately release the accelerator pedal.
Was this review help?
15
3
Share
More Forum Discussions

Can China III Diesel Vehicles Undergo Annual Inspection?

China III diesel vehicles can normally participate in the annual inspection. Below are the relevant details about the annual inspection: Vehicle Inspection Regulations: For passenger vehicles used for commercial purposes, inspections are required once a year within the first 5 years, and every 6 months thereafter. For trucks and large or medium-sized non-commercial passenger vehicles, inspections are required once a year within the first 10 years, and every 6 months thereafter. For small and mini non-commercial passenger vehicles, inspections are required once every 2 years within the first 6 years, once a year thereafter, and every 6 months after 15 years. Consequences of Not Participating in the Annual Inspection on Time: Vehicles that do not undergo the annual inspection on time are not allowed on the road. Driving such vehicles will result in 3 penalty points and a fine. In case of a traffic accident involving a vehicle that has not undergone the annual inspection, the party involved will bear full or primary responsibility, and the insurance company will not compensate.
10
5
Share

What is the actual fuel consumption of the 3.5T Ford Raptor?

The 3.5T Ford Raptor has a fuel consumption of 16.7L/100km. Below are the fuel consumption calculation formula and fuel-saving tips: Correct fuel consumption calculation formula: Fuel consumed ÷ distance traveled × 100 = fuel consumption per 100km. The data on fuel consumed is relatively difficult to obtain. Generally, a full tank is used as the initial data. After driving a certain distance, the tank is filled again, and the fuel amount provided by the gas station is taken as the final data. Fuel-saving tips: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly stepping hard on the accelerator, as this can multiply fuel consumption. Starting by gently pressing the accelerator can shorten the engine warm-up time and effectively improve fuel utilization, thereby achieving fuel-saving effects.
12
1
Share

Can you stop during the reverse parking in Subject 2 of the driving test?

During the driving test for Subject 2, stopping is not allowed, and stopping midway will result in a failure. Below are the requirements and scoring criteria for reverse parking: Requirements for reverse parking: During the test, the vehicle must not stop while moving forward or backward. The vehicle must reverse from one end of the road (with the body crossing the control line) into the parking space, then move forward out of the space and pass the control line at the other end before reversing into the parking space again, and finally move forward out of the space. Scoring criteria for reverse parking: Failure to follow the prescribed route or sequence: failure; vehicle body crossing the line: failure; failing to fully enter the parking space: failure; stopping midway: failure.
4
2
Share

How to Connect Bluetooth in Mustang?

To connect Bluetooth in the English version of Mustang, first turn on the Bluetooth in the car and enable Bluetooth on your phone. Search for the car's Bluetooth device name, then click to pair. When prompted for a pairing code, enter "0000" to successfully connect. More details are as follows: Function: Car Bluetooth is an in-car wireless hands-free system designed based on wireless Bluetooth technology. Its main function is to connect with a mobile phone via Bluetooth for hands-free calls during normal driving. Advantages: The car Bluetooth system is different from ordinary ones. As long as you wear a Bluetooth headset and enable the Bluetooth mode on your phone, you can easily answer any call whether your phone is in a bag, pocket, or on the car seat. It eliminates the need to raise your hand and reduces the impact of electromagnetic radiation on the human body. This is because Bluetooth emits much lower electromagnetic radiation compared to holding a phone directly.
18
5
Share

What causes a sudden increase in RPM when in neutral?

Neutral gear sudden RPM increase may be caused by slight throttle sticking. Below is relevant information about automotive transmissions: Function: Change the transmission ratio to expand the range of torque and speed variation of the driving wheels, adapting to frequently changing driving conditions while keeping the engine operating under favorable conditions; Utilize neutral gear to interrupt power transmission, allowing the engine to start, idle, and facilitating gear shifting or power output. Components: Housing, used to install and support all transmission components and store lubricating oil. The housing should have sufficient rigidity with reinforced inner walls, complex shapes, mostly castings; The transmission part refers to gears, shafts, bearings, and other transmission components. The geometric dimensions of the shafts are determined through strength and stiffness calculations, primarily depending on stiffness. Since the elastic modulus of carbon steel and alloy steel is nearly equal, carbon steel is generally used. Alloy steel is only used when the gear and shaft are integrated or when the shaft is severely loaded.
10
1
Share

Can you still drive on the highway without ETC?

It is possible to drive on the highway without ETC. According to regulations from the State Council, vehicles without ETC cannot enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, meaning drivers without ETC will have to pay tolls manually. Additionally, newly installed ETC devices cannot be used immediately on highways—they must be activated first. During free-toll holidays, highways can still be used. For users who have already installed ETC, passing through ETC lanes will not incur charges. ETC Billing Principle: Highways will have one or more ETC lanes. Communication between the vehicle's electronic tag (installed on the windshield) and the microwave antenna in the ETC lane enables short-range microwave communication. This, combined with computer networking technology and backend bank settlements, allows vehicles to pass through toll stations without stopping to pay tolls. All of this operates on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues. Green and eco-friendly: Promotes low-carbon travel by reducing noise and exhaust emissions since vehicles do not need to stop at toll stations. Reduced wear and tear: Saves costs by minimizing frequent acceleration and braking, thereby lowering vehicle wear and fuel consumption. Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, key city clusters should achieve interoperability of transportation cards, and the proportion of vehicles equipped with ETC should significantly increase." The plan also set a target of "achieving a 50% ETC usage rate for passenger vehicles on roads by 2020." Future possibilities: Beyond improving the convenience of ETC installation and increasing passenger vehicle ETC usage, efforts will also be made to promote ETC adoption for trucks. Future developments may explore deeper integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation initiatives, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC usage.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.