Is it possible to join Huolala without applying car stickers?

1 Answers
HaileyMarie
07/29/25 6:26pm
Joining Huolala requires applying car stickers, which falls under the category of mixed passenger and cargo transportation. Here are the relevant details: 1. Sticker area: The area of car stickers must not exceed 30% of the vehicle's body surface. If it exceeds 30%, approval must be obtained from the vehicle management office, and an application must be submitted to change the vehicle photo on the registration certificate. If traffic police find that the car's color does not match the body color on the registration certificate, they may consider it an illegal modification and impose corresponding fines. In severe cases, the vehicle may be impounded. 2. Repeated use of stickers: Repeatedly applying car stickers is illegal. If the vehicle photo on the registration certificate is not updated in time, the car is not allowed to be driven on the road. This may also affect the vehicle's annual inspection. Additionally, the color of the stickers should not be overly conspicuous, as driving requires concentration. If the sticker colors are too eye-catching, they may distract other drivers and affect normal driving.
Was this review help?
19
2
Share
More Forum Discussions

How to Adjust the Rearview Mirror on a BMW 5 Series?

To adjust the rearview mirror on a BMW 5 Series, simply toggle the mirror adjustment switch to the left or right. Taking the 2021 BMW 525li as an example, it is a mid-to-large-sized 4-door 5-seater sedan with the following dimensions: length 5106mm, width 1868mm, height 1500mm, and a wheelbase of 3105mm. The 2021 BMW 525li is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 135 kW and a maximum torque of 290 Nm. It features a rear-wheel-drive layout, with a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.
8
4
Share

Under What Conditions Should Spark Plugs Be Replaced?

Spark plugs should be replaced under the following conditions: 1. After driving 40,000 to 60,000 kilometers; 2. Abnormal engine shaking during acceleration; 3. Vehicle idling with noticeable vibration; 4. Difficulty starting the engine; 5. Sudden engine stalling. The procedure for replacing spark plugs is: 1. Turn off the engine and remove the spark plug cap; 2. Unscrew the old spark plug counterclockwise; 3. Screw in the new spark plug clockwise; 4. Reattach the spark plug cap; 5. Verify proper installation and test start the engine. Causes of spark plug damage include: 1. Insufficient spark energy during ignition; 2. High air-fuel ratio in the fuel mixture; 3. Engine overheating; 4. Excessively dirty air filter; 5. Excessively high idle speed; 6. Severe carbon buildup and use of low-quality gasoline; 7. Damaged valve oil seals or crankcase ventilation valve failure.
17
0
Share

Which generation does the 2019 Golf belong to?

2019 Golf belongs to the 7th generation. The 2019 Golf is a compact 5-door, 5-seat hatchback with body dimensions of 4259mm in length, 1799mm in width, and 1452mm in height, a wheelbase of 2637mm, and a fuel tank capacity of 50 liters. The 2019 Golf is equipped with a 1.6L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 81 kW and a maximum torque of 155 N·m. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using torsion beam non-independent suspension.
9
1
Share

What to Do If You Forget to Close the Sunroof and It Rains Inside?

The methods to handle water entering the car due to forgetting to close the sunroof in the rain are: 1. Open the car doors to drain most of the accumulated water; 2. Park the car under the sun to dry it out; 3. Use dry towels or newspapers to wipe the damp areas; 4. Take out the car mats and seat covers to dry them outside. The maintenance methods for the sunroof include: 1. Clean the sunroof drainage channel promptly and regularly wipe the sunroof rails with a wet sponge; 2. Apply silicone oil to the sunroof sealing strips after washing the car to effectively prevent the rubber strips from aging. The functions of the sunroof are: 1. Effectively ventilate the car interior and allow fresh air to enter; 2. Meet the needs for a broader view and the requirements of mobile photography and videography.
17
4
Share

How Long After a Hot Engine Stops Can You Add Coolant?

Typically, you can add coolant half an hour after the engine has stopped to prevent damage to engine components caused by adding coolant when the engine temperature is too high. The method for replacing coolant is as follows: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leaks or cracks in the pipes, with a focus on the five-way hose. Coolant is distributed to different parts of the car through the five-way hose to function. If there is any leakage of coolant in this part, replace the hose or re-secure the connection as needed. Drain the old coolant, then flush the fluid channels with clean water. Add clean water to the coolant reservoir, then continue to pour water into the reservoir to allow it to flow continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out of the reservoir will have a faint pink color. Continue adding clean water until the water coming out is clear. Note: Don’t forget to remove the heater hose and drain the water from the heater core. After draining for about an hour, add new coolant through the radiator hose. Then, add another container of coolant to the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. At this point, the coolant level will drop slightly as some air is expelled from the cooling system. Add more coolant until it reaches the maximum mark "MAXT" on the reservoir.
14
2
Share

What is the function of a strut bar?

The functions of a strut bar are: 1. Enhancing the rigidity of the engine compartment and the front part of the body; 2. Reducing the deformation of the frame caused by lateral torque during steering; 3. Decreasing the roll amplitude of the vehicle chassis; 4. Improving the cornering performance of the vehicle. A strut bar is a connecting rod at the top of the front shock absorber and is a commonly used stabilizer bar in car modifications. The classifications of strut bars include: 1. Front lower arm stabilizer bar; 2. Toe-in stabilizer bar; 3. Front shock absorber tower top stabilizer bar; 4. Front crossmember stabilizer bar; 5. Rear shock absorber tower top stabilizer bar; 6. Rear suspension reinforcement stabilizer bar; 7. Chassis reinforcement stabilizer bar.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.