Is it possible not to be photographed when a vehicle crosses a single yellow line?

2 Answers
DelAndrew
07/25/25 9:05am
It is possible not to be photographed when a vehicle crosses a single yellow line. Single yellow lines are divided into solid and dashed lines. The following are different situations regarding whether crossing a single yellow line will be photographed and related information about crossing yellow lines: Different situations regarding whether crossing a single yellow line will be photographed: Solid line: If it is a solid line, whether single or double, crossing it constitutes a traffic violation. If you cross a single yellow line or make a U-turn near a camera, you will definitely be photographed. Dashed line: If it is a dashed line, it is usually set on narrower roads to separate lanes of different driving directions. You can borrow the lane to overtake or make a U-turn under safe conditions. Related information about crossing yellow lines: Crossing a yellow line violates traffic rules. Yellow lines are divided into single and double yellow lines. Vehicles are not allowed to cross or drive over these yellow lines. If violated and recorded by traffic police or cameras, traffic penalties will be imposed, usually involving a certain fine and a deduction of 3 points. When encountering a yellow dashed line during driving, you can cross the line or make a U-turn without affecting the vehicles in the opposite lane.
Was this review help?
20
4
Share
Pinto
08/10/25 7:10pm
I'm the kind of veteran driver who's been behind the wheel for decades. To be honest, crossing a single yellow line might sometimes let you off the hook, especially on remote roads or at night when surveillance cameras are outdated or lighting is poor, reducing recognition rates. But it's purely luck-based and carries huge risks—I've seen too many highway accidents caused by lane violations. Single yellow lines exist as warnings against crossing, ensuring everyone's safety. Camera placement is also crucial: urban centers have stricter monitoring, while suburbs might be more lenient, but if the equipment's functioning, it can instantly capture your violation. Remember, one lucky escape might cost you hundreds in fines plus points—not worth testing. I always remind myself to stay in lane and avoid distractions while driving.
Was this review help?
7
4
Share
Expand All
More Forum Discussions

How to Check the Coolant Level When It's Low?

Here are the methods to check if the car coolant is low: 1. Coolant Warning Light: Check the coolant warning light on the dashboard. If it lights up, it likely indicates low coolant, though it could also be due to high engine temperature. 2. Coolant Reservoir: Open the engine hood and inspect the coolant reservoir directly. If the fluid level is below the minimum mark (MIN), it means the coolant is low and needs to be replenished promptly. Additional Info: The full name of coolant is antifreeze coolant, meaning it has antifreeze properties. It prevents the coolant from freezing in cold winter conditions, which could otherwise crack the radiator or damage the engine block or cylinder head. Coolant also offers excellent performance in preventing freezing, scaling, and corrosion.
9
3
Share

What are the contents of the Subject 3 simulated lighting test?

Subject 3 begins with the lighting test, which mainly covers the use of lights for overtaking, foggy weather, meeting vehicles, and passing through intersections. The mnemonic for the Subject 3 lighting test is: 1. Basic lighting: Use high beams when driving at night without streetlights or under poor lighting conditions, use low beams when meeting non-motor vehicles on narrow roads at night, use low beams when following a vehicle closely in the same direction at night, and use low beams when meeting motor vehicles at night. 2. Alternating lights: Use alternating high and low beams when passing over bridges or pedestrian crossings at night, when navigating sharp turns or slopes at night, when passing through intersections without traffic signals at night, and when the vehicle breaks down on the road at night, obstructing traffic and being difficult to move (use parking lights and hazard warning lights).
15
2
Share

What Causes the Car's Air Conditioning Compressor to Vibrate?

Here are the reasons for the vibration when the air conditioning is turned on: 1. Excessive carbon buildup: If the engine's throttle has not been maintained for a long time, it can easily accumulate carbon deposits. These deposits obstruct the engine's intake system, leading to incomplete engine intake. As a result, the engine may struggle or barely manage to drive the compressor, causing idle vibration. 2. Damaged spark plugs: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Spark plugs are car parts that are prone to wear and tear. Poor spark plug performance can cause the engine to vibrate during startup, affecting the engine's power output. Combined with the pressure from the compressor, this can lead to vibration when the air conditioning is on. If the spark plugs have excessive carbon buildup or are damaged, it is recommended to replace them directly.
13
3
Share

How wide is 30 centimeters in the rearview mirror?

30 centimeters in the rearview mirror is roughly the width of two fingers. When taking the driving test, there are some tips and methods to determine the 30-centimeter distance in the rearview mirror: 1. Observe the wiper protrusion: From the driver's seat, when the wiper protrusion aligns with the right-side line, the distance is approximately 30 centimeters. 2. Look at the one-third point of the car's front: When the right one-third of the car's front aligns with the right-side line, the distance is exactly 30 centimeters. It might be difficult to find this one-third point, as it may not always be the same spot. During practice, you can mark this point on the car and remove the mark once you get used to it. 3. Check the right front door handle: Observe the right front door handle in the right rearview mirror. If the handle is tangent to the right-side line, the distance is correct. If it's too far, adjust the direction slightly. If it's too close, there's a risk of crossing the line.
2
0
Share

What are the pros and cons of modifying a 300-cell header?

Pros and cons of modifying a 300-cell header: 1. Pros: Smoother exhaust flow, strong high-RPM horsepower. Exhaust modifications come in various forms, with many aimed solely at achieving a pleasing sound. More professional modifications involve adjusting the exhaust to better match engine upgrades, allowing the engine to perform at its peak. 2. Cons: Direct exhaust emissions fail to meet standards. Most modified straight-pipe exhaust systems suffer from weak low-RPM performance, increased noise, and excessively loud volume. Untreated exhaust emissions exceed limits, causing severe pollution, unpleasant odors that can enter the cabin, and higher fuel consumption.
6
3
Share

What does it mean when a car boils over?

Car boil-over typically refers to a situation where the engine's operating temperature exceeds the normal working temperature range, affecting machine operation and potentially causing damage. Below are relevant explanations about car boil-over: 1. Causes of boil-over: There are many reasons for car boil-over. Besides hot weather, overloaded air conditioning operation and faulty cooling components can also cause boil-over. Conducting a comprehensive inspection of the car's cooling system is the primary method to prevent boil-over. 2. Avoid immediately opening the cap to add water when boil-over occurs: After the radiator water boils, there is internal pressure. If the radiator cap is opened immediately at this time, hot water may spray out, causing burns. Therefore, car owners must avoid opening the cap to add water right after boil-over occurs.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.