Is it one point or three points deducted for not using lights as required?

1 Answers
WestonAnn
07/30/25 8:21am
According to the newly implemented traffic regulations, motor vehicles that do not use lights as required will be penalized with a deduction of 1 point and a fine; if a vehicle fails to use lights and set up warning signs as required after a breakdown or accident on the road, 3 points will be deducted at once. 1. "Road Traffic Safety Law": Article 90 If a motor vehicle driver violates the road traffic safety laws and regulations regarding road traffic regulations, a warning or a fine shall be imposed. If there are other provisions in this law, the punishment shall be imposed in accordance with the provisions. 2. Extended information: The correct use of vehicle lights is to alert the vehicles or people behind you about your next driving direction. Proper use of vehicle lights is the first and crucial step to ensure your safety and that of others. Safe driving is a guarantee for your safety and that of others.
Was this review help?
7
0
Share
More Forum Discussions

What to Do When Encountering a Vehicle Behind During Overtaking in Subject 3?

Turn on the turn signal in advance to indicate your intention. If the vehicle behind overtakes, do not move. If the vehicle behind does not move, change lanes. Below is relevant information about driving test Subject 3: 1. Introduction: Subject 3 includes the road driving skills test and the safe and civilized driving knowledge test, which are part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safe and civilized driving knowledge test subjects in the motor vehicle driver's test. The content of the road driving skills test varies for different types of vehicles eligible for driving. 2. Specific Test Content of Subject 3: The road driving skills test generally includes: vehicle preparation, light simulation test, starting, driving in a straight line, gear shifting operations, lane changing, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting vehicles, overtaking, making U-turns, and driving at night. The safe and civilized driving knowledge test generally includes: safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of handling after traffic accidents.
11
0
Share

Is There a Fee for the Subject 3 Driving Test?

Subject 3 driving test requires a test fee. Below is relevant information about the driving test Subject 3: 1. Introduction: Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test, which are part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle driver's test. The content of the road driving skills test varies for different types of vehicles. 2. Specific test content for Subject 3: The road driving skills test generally includes: preparation before driving, light simulation test, starting, driving in a straight line, shifting gears, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing crosswalks, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and night driving. The safety and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods in case of tire blowouts and other emergencies, and post-accident handling knowledge.
18
3
Share

What is the 0-100 km/h acceleration time of the Dodge Challenger?

The standard version of the Dodge Challenger achieves a 0-100 km/h acceleration time of 7.9 seconds, powered by a 3.6-liter V6 engine. The higher-performance Hellcat variant, on the other hand, boasts an acceleration time of just over 3 seconds. Below are details about the new Dodge Challenger: 1. Configuration: The Challenger features distinctive five-spoke alloy wheels with a dual-tone design that creates a sleek visual effect. The special edition Challenger SRT8 comes with unique chrome quad exhaust pipes, while the Challenger R/T has dual exhaust pipes. Inside, the special edition models are equipped with pearl-white dual-tone seats, and the manual version features a retro-style shifter resembling a "pistol grip." 2. Performance: The special edition Challenger R/T is equipped with a 5.7-liter HEMI V8 engine delivering 375 horsepower and 556 N·m of torque, while the special edition Challenger SRT8 boasts a 6.1-liter HEMI V8 engine with 425 horsepower and 569 N·m of torque.
17
2
Share

What is the battery capacity of the BYD Han?

According to official data, the BYD Han 2022 DM-i 121KM Noble, Noble Pro, and Noble Premium models. The battery capacity is 18.8kWh, while the 2022 DM-i 242KM Flagship and DM-p 202KM AWD Flagship models have a battery capacity of 37.5kWh. The 2022 EV version has a battery capacity of 85.4kWh. The hybrid version of the BYD Han has an electric range of 121-242km. The pure electric models have a range of 610-715km, with a fast charging time of 0.5 hours. The BYD Han pure electric vehicle has dimensions of 4995mm*1910mm*1495mm, a battery energy of 85.4kWh, and a pure electric range of 610-715km. It is equipped with a single-speed electric vehicle transmission and a permanent magnet synchronous motor, with a vehicle warranty of six years or 150,000 kilometers. The AWD version has a maximum power of 380kW, motor horsepower of 517ps, and maximum torque of 700Nm. The front-wheel-drive version has a maximum power of 180kW, motor horsepower of 245ps, and maximum torque of 350Nm. The BYD Han new energy vehicle uses its self-produced lithium iron phosphate (LiFePO4) battery, with the following specific advantages and disadvantages: Lithium Iron Phosphate Battery: Advantages: Excellent thermal stability, safety, low cost, and long lifespan. Disadvantages: Low energy density and poor performance in low temperatures. Usage: The internal chemical composition begins to decompose at temperatures between 500-600°C, and it does not burn or explode under puncture, short circuit, or high temperature conditions. It also has a long lifespan. However, the vehicle's range is average, and charging efficiency is low when the temperature is below -5°C, making it unsuitable for winter charging needs in northern regions.
18
5
Share

Should the CS75 use 5W30 or 5W40 engine oil?

The CS75 should use 5W30 engine oil. It is recommended to use the original SL-grade 5W30 engine oil. 5W30 has better fluidity than 5W40, which helps reduce fuel consumption and dissipate heat from the engine more quickly. The "W" stands for winter, and the smaller the number before it, the better the oil's low-temperature fluidity, indicating a lower usable environmental temperature and better engine protection during cold starts. For example, 5W40 can be used in environments with temperatures below 40 degrees, while 5W30 can be used in environments with temperatures below 30 degrees. The difference between 5W30 and 5W40 engine oil is that higher viscosity oil leads to higher fuel consumption and louder engine noise, but it provides better sealing performance. Therefore, the choice of oil viscosity should also consider the age of the vehicle. Newer engines with tight component clearances should use lower viscosity oil, while vehicles with significant engine wear should use higher viscosity oil. Precautions for using engine oil: Choose oil based on the engine's requirements, ensuring it matches the engine. Multi-grade oil is recommended due to its advantages in fuel efficiency, long service life, and high efficiency, providing better protection for the engine.
5
5
Share

What does the O/D OFF warning light mean?

When the O/D-OFF indicator light on the car's dashboard illuminates, it indicates that the vehicle's overdrive function has been deactivated. To turn off this indicator light, simply press the O/D button to activate the overdrive function. The specific steps are as follows: Open the driver's side door. Depress the brake pedal. Press the one-touch start button to start the engine. The dashboard lights up, confirming that the engine is running. Press the O/D button to complete the operation. To promptly detect faults in the electronic control unit and maintain the most basic operational capability of the automatic transmission in case of a fault, allowing the car to continue driving and facilitating workshop repairs, many modern electronic control automatic transmissions are equipped with self-diagnosis and fail-safe functions. The electronic control unit includes a dedicated self-diagnosis circuit that continuously monitors all sensors and some actuators in the automatic transmission's electronic control system while the car is in motion. If a sensor or actuator is found to be faulty or malfunctioning, the system will implement protective measures. While driving, if the automatic transmission warning light on the dashboard illuminates, it alerts the driver to immediately take the car to a workshop for inspection and repair. Currently, most vehicles use the overdrive indicator light "O/D-OFF" as the automatic transmission warning light. If the overdrive warning light remains on even after pressing the overdrive switch, it indicates a fault in the electronic control unit.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.