Is it okay to stall an automatic transmission in D gear?

What Are the Causes of Piston Scuffing?

Piston scuffing is fundamentally caused by the inability to form an oil film between the cylinder wall and the piston rings or piston, leading to poor lubrication or even dry friction. Piston scuffing refers to the appearance of noticeable longitudinal mechanical scratches and abrasions on the cylinder wall within the movement range of the piston rings. In severe cases, adhesive wear may occur, resulting in difficulties starting the engine or unexpected shutdowns. Below are preventive measures for piston scuffing: 1. For new engines or those after major overhauls, ensure proper running-in. This involves operating under good lubrication conditions, gradually increasing speed from low to high and load from small to large, strictly following the running-in procedures before putting the engine into full-load operation. 2. Correctly select the clearance between the piston skirt and cylinder liner, as well as the opening and side clearances of the piston rings, according to the manufacturer's specifications. Additionally, during repairs, ensure proper piston alignment and maintain the dimensional accuracy of the cylinder liner. 3. Maintain the coolant temperature within the normal range of 70°C to 95°C to prevent engine overheating. Preheating measures should be taken before starting the engine in winter. 4. Operate the engine properly—avoid overloading, unnecessary throttle blipping, and starting without sufficient coolant. 5. Regularly maintain the air filter to prevent dust from entering the cylinder. 6. Maintain the lubrication system properly to prevent mechanical impurities and carbon deposits from mixing with the engine oil, which can accelerate cylinder liner wear.

3

4

Share

What are the dimensions of the Range Rover Velar?

The Range Rover Velar is a midsize SUV with dimensions of 4811mm (length), 2032mm (width), and 1685mm (height), and a wheelbase of 2874mm. The Velar is equipped with three engines: a 2.0-liter turbocharged engine, a low-power 3.0-liter supercharged engine, and a high-power 3.0-liter supercharged engine. Below are the details: 1. The 2.0-liter turbocharged engine delivers a maximum power of 184kW and a maximum torque of 365Nm, with peak power at 5500rpm and peak torque between 1300-4500rpm. This engine features direct fuel injection and an aluminum cylinder head and block. It is paired with an 8-speed automatic transmission. 2. The low-power 3.0-liter supercharged engine produces a maximum power of 250kW and a maximum torque of 450Nm. It also features direct fuel injection and an aluminum cylinder head and block, paired with an 8-speed automatic transmission. 3. The high-power 3.0-liter supercharged engine delivers a maximum power of 280kW and a maximum torque of 450Nm, with peak power at 6500rpm and peak torque at 3500rpm. Like the others, it includes direct fuel injection and an aluminum cylinder head and block, paired with an 8-speed automatic transmission.

3

0

Share

What are the drawbacks of changing from 18-inch to 19-inch wheels?

Changing from 18-inch to 19-inch wheels has the following disadvantages: 1. Reduced shock absorption performance - larger wheels have relatively lower rolling resistance, leading to decreased shock absorption. 2. Increased road noise - larger wheels require more time to complete a full rotation, with increased friction surfaces resulting in louder noise. 3. Higher fuel consumption - changes in tire section width or aspect ratio will increase fuel consumption. 4. Degraded handling and driving experience - larger wheels raise the center of gravity, affecting vehicle balance and steering response, resulting in insufficient steering input, reduced steering angle, and heavier steering feel. 5. Increased load on the braking system - causing greater wear on brake pads.

14

1

Share

What to Do When the Battery of a Keyless Start Car Key Dies?

The solutions for a keyless start car key with a dead battery are: 1. Insert the smart key into the center console; 2. Insert the key blade inside the remote key into the keyhole; 3. Place the remote key against the start button or other sensing area; 4. Simply replace the battery. Keyless start is part of a smart car, a button device that simplifies the starting process and can also turn off the engine. The functions of keyless start include: 1. Multiple start modes; 2. Convenience and speed; 3. Stable and reliable performance; 4. Smart sensing entry; 5. Free switching between dual modes of the smart key; 6. Smart card backup key; 7. Intelligent silent car wash mode.

16

3

Share

Where is the transmission oil filler port located on the Mistra?

The transmission oil filler port on the Mistra is located at the upper left corner of the engine. The transmission is a mechanism used to alter the speed and torque from the engine, capable of fixed or stepped changes to the transmission ratio between the output and input shafts. The Mistra is a 4-door, 5-seater sedan launched by Beijing Hyundai. Taking the 2021 Mistra Flagship Edition as an example, its body dimensions are: length 4780 mm, width 1815 mm, height 1460 mm, with a wheelbase of 2770 mm and a fuel tank capacity of 52 liters. The 2021 Mistra Flagship Edition is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum power of 125 kW at 5500 rpm and a maximum torque of 253 Nm between 1500 to 4000 rpm.

20

1

Share

What Causes Insufficient Power When Going Uphill?

There are several reasons why a car may experience insufficient power when going uphill: 1. Fuel system issues: The fuel system is a common source of problems in vehicles. Insufficient fuel entering the combustion chamber could be caused by clogged fuel injectors, fuel line leaks, reduced fuel pump performance, or a blocked fuel filter. 2. Poor fuel quality: If using substandard gasoline with excessive impurities, these contaminants can clog small passages or filtration components in the fuel system (such as the fuel pump screen, fuel filter, or fuel injectors) during engine operation, leading to poor fuel delivery and reduced engine performance. 3. Carbon buildup: Excessive carbon deposits in the throttle body or intake manifold can restrict airflow, preventing complete combustion of gasoline and resulting in power loss, along with increased fuel consumption. Clogged fuel injectors may cause poor fuel atomization or complete failure to inject, leading to cylinder misfire and reduced engine output. 4. Faulty ignition coil: A damaged ignition coil may prevent a cylinder from firing properly, causing power loss due to cylinder misfire and accompanied by engine vibration. 5. Fuel pump failure: A malfunctioning fuel pump may not deliver sufficient fuel, ultimately causing inadequate fuel injection and reduced engine power output, resulting in overall vehicle power deficiency.

13

5

Share

Is it okay to stall an automatic transmission in D gear?

What Are the Causes of Piston Scuffing?

What are the dimensions of the Range Rover Velar?

What are the drawbacks of changing from 18-inch to 19-inch wheels?

What to Do When the Battery of a Keyless Start Car Key Dies?

Where is the transmission oil filler port located on the Mistra?

What Causes Insufficient Power When Going Uphill?

What is the actual 0-100 km/h acceleration time of the GAC Trumpchi Shadow Leopard?

Is AMT an Automatic Transmission?

What is the appropriate tire pressure for the X-Trail?

What is the issue with squeaking noise during semi-engaged clutch start in first gear?