Is it okay to only replace the lowering springs without changing the shock absorbers?

What is the difference between guide lines and channelizing lines?

The purpose of setting channelizing lines is to ensure that every vehicle can "follow its lane", playing a role in regulating, guiding, and warning traffic, thereby reducing traffic accidents. Guide lines are set at the entrance section of intersections as lane demarcation lines, called guide lines, used to indicate the position of guide lanes where vehicles should drive according to the guiding direction. Channelizing lines: The form of channelizing lines mainly consists of one or several white V-shaped lines or diagonal line areas set according to the terrain of the intersection, indicating that vehicles must drive along the prescribed route and must not cross or drive over the lines. They are mainly used at overly wide, irregular, or complex intersections, ramp entrances of interchanges, or other special locations. Guide lines: Guide lines are set at the entrance section of intersections as lane demarcation lines, called guide lines, used to indicate the position of guide lanes where vehicles should drive according to the guiding direction; such markings are generally painted at intersections with heavy traffic to clarify the direction of travel, ensure each vehicle follows its lane, and alleviate traffic pressure.

18

1

Share

When the car tail deviates to the right while reversing, which way should the steering wheel be turned?

When the car tail deviates to the right while reversing, turn the steering wheel to the right. Here are the detailed instructions: Principle of direction correction: Take the car tail as the reference. If the tail tends to lean right, turn the steering wheel right; if the tail leans left, turn it left, then straighten in the opposite direction. Reference points for reversing into a parking space: Lines drawn on the ground can be seen through the rearview mirror; the side of another car or a wall makes it easy to spot deviation—look for a properly parked car as a reference; the wall at the rear of the car is a bit more challenging—look back directly (not through the rearview mirror) and adjust the direction at any time to ensure the car is perpendicular to the wall. Mastering basic techniques: Before reversing, observe the surroundings carefully and decide whether the tail should go left or right. Turn the steering wheel left to make the tail go left, and turn it right to make the tail go right.

2

4

Share

Why is the reverse light always on?

The reverse light staying on continuously may be due to a faulty reverse switch. Here are the details: Influencing factors: Poor performance of the reverse radar itself: This is caused by the reverse radar control unit's own poor performance; Abnormal connection of related wiring. Introduction to reverse lights: Reverse lights are installed at the rear of the vehicle to illuminate the road behind and warn vehicles and pedestrians that the car is reversing. All reverse lights are white. Working principle of reverse lights: It is a normally open switch (normally disconnected). When the reverse gear is engaged, the mechanical mechanism presses down the switch contacts; this closes the circuit, turning on the reverse light and triggering the reverse gear warning sound. When the reverse gear is disengaged, the switch contacts spring back, and the reverse light circuit returns to the open state. Generally, the reverse light switch in a tractor is installed on the transmission and is triggered by a depression on the gear shift lever.

4

0

Share

What is the use of the reversing mirror image?

Here is an introduction to the functions of the reversing mirror image: Use of auxiliary lines: Static reversing auxiliary lines do not change during the reversing and steering process. Dynamic reversing auxiliary lines: During the reversing and steering process, the auxiliary lines in the reversing image automatically calculate the vehicle's reversing trajectory based on the steering wheel's rotation angle, helping the driver predict the position after reversing and plan the reversing route in advance. The role of the reversing image: The reversing image compensates for the lack of visualization in reversing radars. It features digital display + sound alerts + real image display + night vision + vehicle multimedia performance (optional), addressing the issue of too many blind spots in ultrasonic reversing radars.

2

1

Share

How to reset the wrench light on a 2019 Corolla?

2019 Corolla wrench light reset method: 1. With the vehicle turned off, press and hold the trip meter button on the instrument panel for more than five seconds; 2. Power on the vehicle, wait for the maintenance light to flash, and the wrench symbol will disappear after a few more seconds. Taking the 2019 Corolla Hybrid 1.8L E-CVT GL-i Pioneer Edition as an example: It is a compact car under FAW Toyota, with dimensions of 4635mm in length, 1780mm in width, and 1455mm in height. The 2019 Corolla Hybrid 1.8L E-CVT GL-i Pioneer Edition is equipped with a 1.8L naturally aspirated engine, delivering a maximum power of 90kW, paired with an E-CVT continuously variable transmission.

13

4

Share

What Causes the Clicking Sound When Reversing?

When reversing, the clicking sound is generally a normal phenomenon. Here are the specific explanations: When moving forward: Since the brake pads are mounted on the brake caliper bracket, under normal circumstances, the brake pads fit tightly against the front end of the bracket in the direction of travel, leaving no gap. Therefore, no abnormal noise occurs when braking while moving forward. When reversing: When the vehicle is moving backward, the direction of travel is opposite, and there is a certain gap between the brake pads and the rear end of the bracket. As a result, when braking, the brake pads may hit the rear end of the bracket, producing a clicking sound. This is a normal phenomenon. Improvement method: Applying a thin layer of grease to the contact points between the brake pads and the brake caliper bracket can help alleviate this issue to some extent. It is important to note that the grease should not be applied to the friction surface of the brake pads or the brake disc, as this could negatively affect braking performance.

18

1

Share

Is it okay to only replace the lowering springs without changing the shock absorbers?

What is the difference between guide lines and channelizing lines?

When the car tail deviates to the right while reversing, which way should the steering wheel be turned?

Why is the reverse light always on?

What is the use of the reversing mirror image?

How to reset the wrench light on a 2019 Corolla?

What Causes the Clicking Sound When Reversing?

Should You Press the Clutch or the Accelerator When Reversing?

What to Press When Reversing?

What are the reasons for the sudden stiffness and inability to press the brake when reversing?

What does a guide lane line mean?