Is it okay to leave the air conditioning on all night in a new energy vehicle?

1 Answers
Marlene
09/03/25 4:56am
It is not recommended to leave the air conditioning on all night in a new energy vehicle, as it may cause damage to the engine. Causes carbon buildup in the engine: Leaving the air conditioning on all night can lead to carbon buildup in the engine because the fuel does not burn completely when the engine is idling. Causes carbon monoxide accumulation in the vehicle: At the same time, since the vehicle is not moving, it will produce a large amount of carbon monoxide. The generated carbon monoxide gradually accumulates around the bottom of the vehicle, increasing in concentration. Eventually, a certain amount will enter the vehicle through the air circulation system. Carbon monoxide is highly toxic, and even a small amount can be fatal. Therefore, even if you are outdoors and using the internal air circulation (in fact, even with the internal circulation on all night, some air exchange with the outside will still occur), the risk of poisoning is very high.
Was this review help?
9
0
Share
More Forum Discussions

Where are Lynk & Co engines produced?

Different Lynk & Co models use different engines. The 2.0L engine model is JLH-4G20TD, with a maximum horsepower of 190 hp, maximum power of 140 KW, maximum power speed of 4700 rpm, and maximum torque of 300 Nm. The 1.5L engine model is JLH-3G15TD, with a maximum horsepower of 180 hp, maximum power of 132 KW, maximum power speed of 5500 rpm, and maximum torque of 265 Nm. Lynk & Co engines are produced at the Volvo Zhangjiakou Engine Plant and are domestically manufactured. For daily maintenance of Lynk & Co engines, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, oil should be changed regularly based on usage conditions, and the oil level should be kept moderate. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through, it may burst the filter or open the safety valve, allowing oil to bypass the filter and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.
7
1
Share

Is the Geely Emgrand GS equipped with a three-cylinder engine?

Geely Emgrand GS has both three-cylinder and four-cylinder engines. The models equipped with three-cylinder engines are the Emgrand GS 2020 1.5T DCT Dynamic 260T and the Emgrand GS 2020 1.5T DCT Dynamic Pro 260T. A three-cylinder engine consists of three cylinders, with three identical single cylinders arranged within the same engine block sharing a single crankshaft to output power. Its primary function is to convert chemical energy into mechanical energy. The Geely Emgrand GS is a compact SUV introduced by Geely Auto, with dimensions of 4440mm in length, 1833mm in width, and 1573mm in height, and a wheelbase of 2700mm. It is powered by two turbocharged engines: a 1.4T L4 and a 1.5T L3, with maximum power outputs of 104kw and 130kw respectively. It is paired with a CVT transmission (simulating 8 gears), a 6-speed manual transmission, or a 7-speed dual-clutch transmission.
18
5
Share

How to Bleed Air When Replacing Coolant in Baojun 560?

Baojun 560 replacing coolant and bleeding air method is: 1. First ensure all the old coolant has been drained completely, then fill with new coolant to the full mark, also fill the overflow tank to full (keep the cap off at this stage). Start the engine and let it idle until reaching normal operating temperature. As the coolant begins circulating through the system, the engine will automatically expel trapped air, causing the coolant level to drop gradually. The Baojun 560 is a compact SUV produced by SAIC-GM-Wuling, with dimensions of 4620mm (length) × 1820mm (width) × 1755mm (height) and a 2750mm wheelbase. It is equipped with either a 1.5L turbocharged engine (110kW max power, 230Nm max torque) or a 1.8L naturally aspirated engine (101kW max power, 186Nm max torque), paired with 6-speed DCT, 6-speed manual or 5-speed AMT transmissions.
3
1
Share

What to Do When the Fuel Pump Keeps Clicking Off Before the Tank is Full?

The solution to the fuel pump clicking off before the tank is full: Loosen the fuel pump nozzle slightly while refueling. The fuel pump nozzle has a sensor at the front that automatically shuts off the nozzle when it comes into contact with fuel to prevent overflow. If the nozzle is pressed too tightly during refueling, the rapid flow of fuel can cause it to splash up and trigger the sensor, leading to the nozzle clicking off. The full name of the car fuel tank is the automobile fuel tank, which is categorized by material into steel fuel tanks and aluminum alloy fuel tanks. Among these, aluminum alloy fuel tanks not only meet strength requirements but also offer significant advantages in corrosion resistance compared to steel and other new materials, making them the preferred choice for large buses and heavy trucks, which consume large amounts of fuel and require high fuel quality.
14
1
Share

Where is the OBD port located on the Peugeot 408?

The OBD port on the Peugeot 408 is located under the steering wheel on the left side, inside a cover panel near the left knee. Open the cover panel to find the connector. OBD is a system that monitors the vehicle's operating status and provides timely feedback on abnormalities, primarily monitoring the engine condition and exhaust emissions. The Peugeot 408 is a compact car introduced by Dongfeng Peugeot, with dimensions of 4750mm in length, 1820mm in width, and 1488mm in height, and a wheelbase of 2730mm. It is equipped with two turbocharged engines: a 1.2T and a 1.6T, with maximum power outputs of 100kW and 125kW, and maximum torque of 230Nm and 250Nm, respectively. It is paired with a 6-speed dual-clutch transmission and a 6-speed automatic manual transmission.
7
4
Share

What is the spare tire solution for the Touran L?

The spare tire solutions for the Touran L are: 1. It can be vertically fixed on one side inside the car using a fixing strap, with the tire side and the plastic fixing hook on the right side of the third row tied tightly with a nylon rope, and then connected to the metal fixing hook at the lower right, which can save space inside the car; 2. Alternatively, a roof rack can be installed to place the spare tire on the roof. Before installation, it is advisable to consult the local vehicle management office to avoid unnecessary trouble. The Touran L is an MPV launched by SAIC Volkswagen, with a length, width, and height of 4527mm, 1829mm, and 1659mm respectively, a wheelbase of 2791mm, equipped with a 1.4T turbocharged engine, a maximum power of 110kw, a maximum torque of 250nm, and matched with a 7-speed dual-clutch transmission.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.