Is it okay to drive at 80 km/h continuously on the highway?

1 Answers
CamillaDella
07/24/25 6:07pm
It is not okay to drive at 80 km/h continuously on the highway, mainly depending on the speed limit of the driving lane. If you are in the left fast lane, the minimum speed is 100 km per hour. Maintaining a speed of 80 km per hour would violate the driving speed regulations, so you should drive according to the speed limit signs. According to relevant regulations, the speed should be maintained between 60 and 120 km per hour, and when driving on the ramp, the speed limit is 40 km per hour. When driving on the highway, be sure to turn on the turn signal in advance before overtaking or changing lanes, and pay attention to the exit signs. If you miss the exit, do not slow down, brake, or make a U-turn, as stopping or making a U-turn on the highway is illegal. Also, pay attention to the following distance. If the speed is above 100 km per hour, maintain a distance of 100 meters; if the speed is below 100 km per hour, maintain a distance of 50 meters.
Was this review help?
3
4
Share
More Forum Discussions

What does odo mean on the car dashboard?

Odo on the car dashboard represents the total mileage of the vehicle. Cars also have a trip meter, which can calculate the distance traveled over a certain period of time. The trip meter is marked as 'trip'. The lower the mileage of the car, the less wear there is on the engine and transmission. How odo works: Since the diameter of the car's wheels is known, the circumference of the wheels is constant. From this, the number of rotations the wheels make per mile can be calculated, and this number is also constant. Therefore, by automatically accumulating the number of wheel rotations and then dividing by the number of rotations per mile, the mileage can be determined.
10
1
Share

What is the use of the M gear in a car?

It is used to obtain greater traction. For example: 1. Climbing steep slopes: You can use the M gear to shift to a lower gear, obtaining greater torque, which in simpler terms means better climbing ability. 2. Descending long slopes: You can also shift to a lower gear to use engine braking to slow down. This way, you don’t need to rely solely on the brakes to slow down continuously. Prolonged braking during long descents can lead to brake fade due to overheating. 3. The M gear can also help the car escape difficult situations: For example, if the car is stuck in sand and the tires are spinning, you can use the M gear, shifting to 2nd or 3rd gear to get out. Additional information: M gear usage tips: 1. Downshifting to overtake: When overtaking, if you are in D gear, the speed won’t increase rapidly even if you press the accelerator hard, as the car will only shift up sequentially to overtake. However, switching to M gear makes a big difference. Pressing the accelerator will allow the car to utilize the high torque of a lower gear for instant acceleration, completing the overtaking maneuver more quickly. 2. Driving on highways: It’s best to use manual mode when driving on highways, as it not only allows for quicker acceleration but also enables the use of engine braking during sudden stops. When driving at high speeds, if you need to brake, press the brake pedal while quickly pulling the gear lever back multiple times to force the car into a lower gear, generating strong engine braking to speed up deceleration.
6
0
Share

What Causes Brake Disc Noise?

Reasons for brake disc noise: 1. Rusty brake calipers: If brake fluid is not replaced for a long time, it will deteriorate, and the moisture in the fluid can cause the calipers to rust, leading to friction and noise. 2. Slow return of the master cylinder: Abnormal return of the brake calipers can also cause brake pad noise. 3. New car break-in period: The brake pads and discs of a new car are in a brand-new state and still in the break-in period, which may produce some noise. This is normal. 4. Foreign objects between the brake pads and discs: While driving, foreign objects like sand or gravel can get lodged between the brake pads and discs, causing noise during braking. 5. Hard brake pad material: Most OEM brake pads are made of semi-metallic materials, which can easily produce noise when rubbing against the brake discs. 6. Improper installation of the brake system: If the spacing between the brake pads and discs or the tightness of the nuts is not properly adjusted during installation, it can cause noise. 7. Noise during reverse braking: Since brakes mostly work during forward motion, prolonged wear in one direction can create burrs on the reverse side. When braking in reverse, these burrs rub against the brake disc, causing noise. Solutions for brake pad noise: For new cars, the noise will stop after the break-in period. For noise caused by foreign objects, the owner can have the brake discs cleaned at a repair shop, as the issue usually lies with the discs rather than the pads. For noise due to improper installation, it's recommended to visit a 4S shop to adjust the spacing and nut tightness. For noise during reverse braking, the brake pads can be removed and polished or replaced.
16
2
Share

Where is the VIN located on the Haima M5?

The VIN of the Haima M5 is located on the left side of the front windshield. The VIN, also known as the Vehicle Identification Number, consists of a unique set of 17 alphanumeric characters. This number is used to identify the manufacturer, engine, chassis number, and other details of the vehicle. The Haima M5 has a body length of 4698mm, width of 1806mm, height of 1477mm, and a wheelbase of 2685mm. It is equipped with a naturally aspirated 1.6L engine coded HM474Q-C, which delivers a maximum power output of 92 kW at 6000 rpm and a peak torque of 151 Nm.
4
4
Share

How to Activate the Cruise Control on the GL8?

GL8's cruise control activation method: 1. Maintain the desired speed and press the cruise control button; 2. Adjust the speed by rolling the wheel up or down; 3. Release the accelerator pedal once the green cruise control symbol appears on the dashboard. The function of cruise control is to maintain the vehicle's speed as set by the driver without the need to press the accelerator pedal, allowing the car to travel at a constant speed. The GL8 is a classic top-tier MPV under the Buick brand. The Buick GL8 family consists of the GL8 Avenir, GL8 ES, and GL8 Business Travel models, forming a trio of product offerings. All models are equipped with a 2.0T SIDI direct-injection turbocharged engine.
8
1
Share

How to Add Brake Fluid to a Car?

Method for adding brake fluid to a car: First, open the car's hood, locate the brake fluid reservoir, open the reservoir cap, and then you can add the brake fluid. Car brake fluid is the liquid used in hydraulic brake systems, unaffected by high temperatures, and does not cause corrosion, softening, or expansion to metal and rubber. Brake fluid, also known as hydraulic brake fluid, is transmitted from the master cylinder to the brake calipers at each wheel during braking. The brake calipers press the brake pads against the brake discs under hydraulic pressure, thereby stopping the car. Brake fluid's volume changes with temperature variations, and moisture can enter through the vent holes in the brake fluid reservoir. This moisture is dissolved by the brake fluid, lowering the fluid's boiling point.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.