Is it okay to drive at 140 during the break-in period of a new car?

1 Answers
Ursula
07/30/25 1:35am
It is not advisable to drive at 140 during the break-in period of a new car. There are strict requirements for speed during this period. Generally, it is recommended to keep the maximum speed at 80 km/h and try not to exceed 100 km/h. The daily engine speed should be maintained between 2000 and 4000 RPM, and it is best not to exceed 4000 RPM. Precautions during the break-in period of a new car: 1. Minimize sudden braking and avoid long-distance trips, as prolonged engine operation can lead to component wear; 2. Regularly check for any oil leaks; 3. Avoid sudden acceleration and try to maintain a steady speed while driving; 4. Let the engine idle for five minutes before starting a cold car.
Was this review help?
8
1
Share
More Forum Discussions

How is the tire cycle calculated?

The tire cycle is usually marked on the outside of the tire. There are numbers engraved on the tire sidewall. The last four digits of this mark indicate the production date. For example, if the last four digits are 0813, it means the tire was produced in the eighth week of 2013. Based on the date conversion, the tire was produced at the end of February. Below is relevant information about tires: 1. Function: The tire is one of the important components of a car. It directly contacts the ground and, together with the car's suspension system, mitigates the impact experienced during driving. A good tire ensures excellent adhesion between the wheel and the road surface, thereby improving the car's traction and driving performance. 2. Different cars have different tires: The car's tires need to bear the weight of the car when it is unloaded and fully loaded, so vehicles of different weights have different tires. Some models are also equipped with spare tires, which are divided into full-size spare tires and non-full-size spare tires. Full-size spare tires are the same as the original tires, while non-full-size spare tires can only be used as temporary replacements.
12
0
Share

How to Check the Average Fuel Consumption of Geely Binyue?

You can use the multifunction steering wheel to display the vehicle's average fuel consumption on the instrument panel. Here is an introduction to the Geely Binyue: 1. Combined Fuel Consumption: The combined fuel consumption of the Geely Binyue ranges between 6.3-8.2L. 2. Model: The Binyue is the first compact SUV based on Geely's BMA architecture. 3. Powertrain Configuration: It is equipped with a 1.5T turbocharged engine, which delivers a maximum power of 177 horsepower and a maximum torque of 255 Nm. 4. Transmission System Configuration: The engine is paired with a 7-speed wet dual-clutch transmission. 5. Engine: This engine was jointly developed by Geely and Volvo, specifically a three-cylinder engine. 6. Body Dimensions: The length, width, and height are 4330*1800*1609mm, with a wheelbase of 2600mm.
11
3
Share

What is the tire model of the Volkswagen Lavida?

The tire model of the Volkswagen Lavida is 205/55R16. Below are the detailed specifications of the Volkswagen Lavida: 1. Interior Features: The high-end models include ambient lighting. Depending on the variant, the Lavida is equipped with features such as ACC adaptive cruise control, an 8-inch central control screen, automatic dual-zone air conditioning, air filtration, seat heating, an electronic parking brake, and auto hold. 2. Powertrain: The Lavida is powered by two engines from the EA211 series: a 1.5L and a 1.4T. The maximum power outputs are 85kW (116PS) and 110kW (150PS), respectively, with peak torques of 150N·m and 250N·m. The 1.5L engine is a new addition, replacing the previous 1.6L engine, and offers a combined fuel consumption as low as 5.5L per 100km. The 1.5L engine is paired with either a 5-speed manual or a 6-speed automatic transmission, while the 1.4T engine comes with a 7-speed dual-clutch transmission.
2
2
Share

What is the difference between National 4 and National 5?

The differences between National 4 and National 5 are as follows: 1. Emission standards: Compared to the National 4 emission standards, the National 5 emission standards are stricter, with fewer pollutants and more environmentally friendly. 2. Control system: From the perspective of the vehicle itself, compared to National 4, the emission control system of National 5 is more complex, and the cost has also increased. Additional information: The National Fifth Stage Motor Vehicle Pollutant Emission Standard, also known as the "National 5 Standard," has an emission control level equivalent to the European Union's currently implemented Stage 5 emission standard. The EU has been enforcing this standard since 2009, with stricter limits on nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter emitted by motor vehicles. From National 1 to National 4, each upgrade in the standard reduces vehicle pollution by 30% to 50%. The National 4 emission standard is the fourth stage of motor vehicle pollutant emission standards in China. The main pollutants emitted by vehicles include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), and PM (particulate matter). Through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, vehicle emissions are controlled and reduced to below specified levels.
10
5
Share

Can Scratches That Expose the Primer on a Vehicle Be Repaired?

Scratches that expose the primer on a vehicle can be repaired. However, it is advisable to take the car to a scratch repair shop as soon as possible to prevent rusting and corrosion of the surrounding paint. Below are detailed solutions for different types of scratches: 1. Minor Scratches: For minor scratches, polishing can restore the shine of the paint. Use a polishing wheel along with a polishing compound to remove debris and oxidation from the paint, smoothing out the fine scratches. The compound will also penetrate the paint, restoring its original luster. 2. Deeper Scratches: For deeper scratches, check if the metal surface is exposed. If not, rust is not a concern, and you can carefully apply touch-up paint using a fine brush, allowing it to dry completely. 3. Deep and Narrow Scratches: For deep, narrow scratches, colored putty can be used for effective repair. Gently sand the scratched area without enlarging it, ensuring it is clean before applying the putty. Carefully fill the scratch with putty, making sure it adheres well, then apply a finishing compound and wax. 4. Primer-Exposing Scratches: If the scratch has exposed the primer, visit a scratch repair shop immediately to prevent rust and further damage to the surrounding paint.
16
4
Share

Methods for Treating Scratches on Chrome Trim

Methods for treating scratches on chrome trim are as follows: 1. Toothpaste Repair Method: Toothpaste contains antioxidants and decontamination abrasive particles. You can use a damp towel dipped in toothpaste to polish, but it is ineffective against stubborn rust spots. 2. Toilet Cleaner Repair Method: Toilet cleaner also contains dilute hydrochloric acid, which can react chemically with oxides. After dissolving the oxides, wipe them clean with a damp towel. This method is less labor-intensive than using toothpaste and has good practical results, basically restoring the brightness of the chrome strip. It is also a method currently used by many people. 3. WD-40 Rust Inhibitor: WD-40 has strong surface affinity and permeability for metals. It can penetrate into the capillary pores of the metal to 100% remove moisture and dampness, forming an extremely thin and dense protective film to isolate dampness and air, effectively solving the problem of metal rusting "from the inside out." 4. Carburetor Cleaner: Although this is a product specifically designed for cleaning carburetors, it can also remove stubborn stains such as oil and glue. The method of use is to spray the cleaner on the stained chrome trim and then wipe it clean with a damp towel. It should be noted that carburetor cleaner is somewhat corrosive, so try to avoid spraying it on the car paint. If accidentally sprayed, rinse it off with plenty of water and dry it. 5. Copper Polish: Copper polish has a very good effect on removing rust from most metal materials.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.