Is it okay not to apply film on the car's front windshield?

1 Answers
Vera
07/29/25 1:47pm
It is acceptable not to apply film on the car's front windshield. Here are the benefits of applying front windshield film: 1. The car's front windshield is the primary source of heat radiation that raises the temperature inside the vehicle. Applying a transparent film can significantly improve the driving environment inside the car while reducing the energy consumption of the air conditioning, thereby achieving energy-saving effects. 2. After applying film to the front windshield, it effectively blocks ultraviolet rays, protecting the dashboard from radiation and extending its service life. 3. Since the car's front windshield is made of tempered safety glass, if the glass shatters, having the front windshield film applied prevents the fragments from scattering, thereby protecting the driver's safety.
Was this review help?
6
3
Share
More Forum Discussions

Where is the GPS usually installed in a car?

GPS is usually installed inside the front and rear bumpers, in the trunk, under the decorative panel below the front windshield, inside the spare tire, and under the center console. Inside the front and rear bumpers: This is the most common placement location because it is very concealed and not easily noticed, ensuring sufficient security. Additionally, the bumpers have an uneven shape, making them ideal for installing GPS devices in the grooves. Inside the trunk: The car's trunk is very spacious, offering numerous potential installation spots. Basically, laying a blanket in the trunk is enough to completely cover the GPS and prevent it from being discovered. Under the decorative panel below the front windshield: Unless the front panel is removed, the GPS cannot be detected when placed here. Inside the spare tire: However, there is a drawback to this method—it only applies to spare tires mounted on the rear of the vehicle, not those stored inside the trunk. This is because the trunk, spare tire, and the metal layers of the spare tire casing can significantly interfere with the GPS signal. Center console: If wired, the GPS is typically installed in the center console, A-pillar, or under the steering wheel.
9
5
Share

What are the differences between the Haval H9 and the Maxus D90-Pro?

Haval H9 and Maxus D90-Pro are both SUV models with the following differences: Power configuration: The Haval H9 is equipped with a 2.0T cast iron engine, while the Maxus D90-Pro features a 2.0T aluminum alloy engine. Although the aluminum alloy engine offers better lightweight performance, the cast iron engine has higher durability, making it more suitable for off-road conditions. Additionally, the Haval H9's engine has superior maximum power and torque compared to the Maxus D90-Pro. Off-road capability: The Haval H9 has an approach angle of 28 degrees and a departure angle of 23 degrees, with a ground clearance of 206mm, while the Maxus D90-Pro has an approach angle of 28 degrees and a departure angle of 25 degrees, with a ground clearance of 210mm. Comfort: The Haval H9 excels in seating comfort with features like leather seats, front and rear seat heating, electric adjustment for the driver and passenger seats, ambient lighting, and Infinity audio system. The Maxus D90-Pro focuses more on usability with features such as an electric tailgate, luggage compartment power outlet, navigation with traffic display, rear privacy glass, and in-car PM2.5 filtration. Body dimensions: The Maxus D90-Pro measures 5005/1932/1875mm with a wheelbase of 2950mm, while the Haval H9 measures 4856/1926/1900mm with a wheelbase of 2800mm.
15
1
Share

What does ignition on mean?

ignition on means to start the engine. If the vehicle is already powered on, it may indicate that the engine can be started. Car starting method: When starting the car, turn the key to the LOCK position. Sometimes it cannot be turned, and you need to shake the steering wheel slightly. This is because the steering wheel is locked in this position. Be careful not to use excessive force to turn the key, as it may cause damage. When the key is turned to ACC, the main circuit of the car is powered on, ensuring the normal power supply of the car's circuits. The onboard computer will check if the data is normal, and you should wait for three to five seconds at this stage. When the key is turned from ACC to ON, you will hear the sound of the fuel pump drawing fuel, as the car prepares for normal driving. The dashboard lights will automatically display whether everything is normal, and the key should generally remain in this position for seven to eight seconds. When the key is turned from ON to START, release it after hearing the engine start, and the key will automatically return to the ON position. Do not manually return it to ON to avoid engine damage. Car starting precautions: Pay attention to the time interval when turning the key from LOCK to START. Ignoring this may cause errors in the onboard computer's self-check. Also, ensure the key is not left in the START position while driving, as this may cause the starter to continue working and lead to circuit malfunctions.
3
5
Share

Where is the Xiali wiper fuse located?

It is located inside the fuse box in the engine compartment. Replacing the fuse: There is a white clip provided inside the fuse box (used to remove the fuse). Using the fuse clip makes it easy to remove the old fuse, and then installing the new fuse completes the task. However, it's important to note that attempting to remove it by hand is nearly impossible—no matter how strong your nails are, it's futile. So, don't forget about the existence of the white clip. Types of fuses: There are two types of automotive fuses: high-current and low-current fuses. Generally, medium to low-current fuses are more common in cars, and the wiper fuse is a blade-type fuse.
15
3
Share

Which country does the Alphard come from?

Alphard is produced in Japan. Introduction to Alphard: The Alphard is a luxury MPV developed by Toyota in response to the Nissan Elgrand, built on an improved chassis of the Previa. The first-generation Alphard was introduced in 2002, equipped with either a 2.4-liter or 3.0-liter engine, both available with an optional four-wheel-drive system. Exterior dimensions of the Alphard: From the side view, it appears more rounded, showcasing a streamlined design to perfection. It features triangular front windows and parallelogram-shaped rear windows, creating a unique geometric combination on the vehicle's side.
5
1
Share

Which country does Dunlop belong to?

Dunlop is a Japanese tire brand. Dunlop employs four major technologies: 4D innovative nano-level design, high-performance biological material technology, non-pneumatic tire technology, and sealant tire technology, reflecting the brand's continuous improvement and pursuit of excellence in enriching tire product categories and enhancing technological levels. Tires can prevent severe vibrations and premature damage to automotive components, adapt to the high-speed performance of vehicles, reduce driving noise, and ensure driving safety, handling stability, comfort, and energy-saving economy. Tires are circular elastic rubber products assembled on various vehicles or machinery for ground rolling, mounted on metal rims with high wear resistance.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.