Is it okay if someone else picks up my lost driver's license?

2 Answers
MacPaisley
08/27/25 8:42am
If someone picks up a lost driver's license, the most common misuse would be to use it for deducting points on behalf of others. If your driver's license is lost, you should quickly go to the vehicle management office to report the loss and apply for a replacement to avoid it being misused by bad actors, which could cause unnecessary trouble and losses. Like other identification documents, a driver's license remains valid as long as it has not expired or been reported lost. Below is relevant information about obtaining a driver's license: 1. The process of obtaining a driver's license: registration, traffic rules study, subject one exam, subject two exam, subject three exam, subject four exam. 2. Exam content: The exam subjects include traffic regulations and related knowledge, field driving, road driving (including safe and civilized driving), etc. Specific items include reverse parking, narrow road U-turns, parallel parking, hill start, right-angle turns, curve driving, emergency braking, tunnels, toll booth card collection, straight-line driving, lane changing, passing intersections, pulling over, etc.
Was this review help?
5
3
Share
PrestonDella
09/09/25 7:20am
That time I lost my driver's license, I initially thought it might be fine if someone found it. However, a friend told me that someone had used my license information for illegal driving, almost deducting my points. I immediately went to the DMV to report it, and they said the license contains my ID number and address—if used for fraud or identity cloning, the trouble could be huge. Now, I regularly check my belongings to avoid misplacing my license. It's best to apply for a replacement immediately if lost; it doesn’t cost much and can even be done via an app. Also, notifying the traffic police department allows for a lost report, making it harder for others to misuse. The key is to protect your privacy and not be careless.
Was this review help?
7
0
Share
Expand All
More Forum Discussions

Is the Geely Emgrand S fuel-consuming?

This car, as a common compact family sedan, generally does not have very high fuel consumption. The normal fuel consumption is around six to seven liters. In terms of power: The Emgrand S is equipped with a 1.4T turbocharged engine across the entire lineup, with a maximum power of 104kW and a maximum torque of 235N-m. The combined cycle fuel consumption is 5.9L/100km, paired with an 8-speed CVT continuously variable transmission. Factors affecting car fuel consumption: There are many factors that affect a car's fuel consumption, closely related to the engine's displacement, the technology and craftsmanship of the engine, the weight of the car body, and the user's driving habits. The speed at which the car is driven, the distance traveled each time, the road conditions during long-distance driving, the level of tire pressure, and the intensity of throttle and brake usage will all affect fuel consumption.
4
0
Share

How to set up the reversing camera on a Mercedes-Benz S320?

The reversing camera on the Mercedes-Benz S320 does not require additional setup. Simply shift the gear into reverse, and the reversing camera system will automatically activate. Below is an introduction to the reversing camera: 1. The reversing camera greatly assists drivers in observing the surroundings of the vehicle, making parking more convenient. If the reversing camera malfunctions due to system upgrades or other reasons, you can visit a 4S store to have professionals restore it. Generally, as long as the reversing camera settings are not tampered with, it should function normally. 2. Some high-end Mercedes-Benz S-Class models are equipped with a 360-degree camera system, which uses cameras on the front, rear, and side mirrors to simulate a bird's-eye view, allowing drivers to see the vehicle's surroundings and further enhancing convenience for moving and parking the car. 3. When moving or reversing the vehicle, the speed must not be too fast, and the driver should always observe the situation in the left and right rearview mirrors. Although the car is equipped with a reversing camera, it is only an auxiliary tool. Extra caution is still required when reversing.
17
1
Share

What should be noted for Subject 4 exam?

Here are the precautions for the Subject 4 exam: 1. First, arrive at the examination venue half an hour to one hour before the scheduled exam time to familiarize yourself with the environment in advance. This helps avoid nervousness. 2. Wait for the driving school staff to arrive. They will distribute the express delivery form (for mailing the driver's license) and relevant exam certification materials. You only need to present your ID card. 3. The invigilators at the exam center will explain the exam rules. Listen carefully to avoid operational errors during the actual exam, which could result in failure. 4. After entering the exam hall, it is best to turn off your phone and wait patiently in the designated seating area. When the invigilator calls your name, swipe your ID card on the exam machine to receive your seat number, then you can enter the exam room. After entering, take your assigned seat. 5. During the exam, answer the questions patiently. The computer will prompt you if you answer incorrectly. Pay attention to the number of incorrect answers, as Subject 4 allows a maximum of 5 wrong answers. After completing all questions, the system will display your score, and then you can click "Submit". Note: You must spend at least 10 minutes on the exam before you can submit.
17
0
Share

How to Open the Hood of BYD F0?

BYD F0 front hood opening steps are as follows: The switch is located on the left side under the steering wheel in the driver's seat. Pull it to open the engine hood. Here is an introduction to BYD F0: 1. When BYD F0 was first launched, it was very popular among consumers. 2. The exterior design of this car is very cute and compact, and it has good reliability and durability. 3. BYD F0 is a micro car, and the rear space of this car is very small. 4. BYD F0 is equipped with a 1.0-liter three-cylinder naturally aspirated engine, which is quite fuel-efficient. The fuel consumption of this car is about 5.5 liters per 100 kilometers. The engine is paired with a 5-speed manual transmission or a 5-speed AMT transmission.
8
3
Share

How Thick Should Jumper Cables Be for Cars?

Theoretically, for gasoline vehicles, the minimum requirement is 6 square millimeters, and nothing thinner should be used as 6 square millimeters is already pushing the limit. In practice, it is recommended to use copper cables of 10 square millimeters or thicker. For diesel vehicles, even thicker cables are required. Below is more detailed information: 1. The terms 6 square millimeters and 10 square millimeters refer to the cross-sectional area of the copper core. There are two ways to indicate the thickness of jumper cables: one is by the cross-sectional area (mm²) of the copper core, and the other is by the diameter (mm) of the copper core. 2. If expressed in terms of copper core diameter, gasoline vehicles should use 8mm copper core cables, while diesel vehicles require 12mm copper core cables. The plastic insulation of the jumper cables is also very important. One must consider both the material and the frequency of use. Generally speaking, occasional use once or twice should not cause any issues.
1
3
Share

What are the causes of abnormal noise from the Nissan Teana's pulley?

There are many reasons for abnormal noise from the Nissan Teana's pulley. Abnormal pulley clearance: If there is noise from the pulley, check whether the pulley has excessive clearance. If a large clearance is found, the pulley idler should be replaced. Abnormal belt operation: Check the state of the belt during operation. The belt has a specific operating range during operation. If it exceeds this range and the belt is stretched too long, the belt needs to be replaced. Additionally, prolonged operation of the belt can cause thermal expansion. In this case, letting the machinery rest for a while will help. Belt wear: If the belt is within the normal range, observe whether the working surface of the belt is worn. This could be due to slippage caused by excessive belt wear. Impact of special weather conditions: If the machine frequently makes abnormal noises during operation in humid weather and the surfaces of the belt and pulley are smooth, you can sprinkle some water on the pulley of the machine. If the machine produces abnormal noise, the belt should be replaced.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.