Is It Normal to See Engine Vibration with the Naked Eye in a Volkswagen?

2 Answers
VivienneAnn
07/29/25 6:13am
It is normal to see engine vibration with the naked eye in a Volkswagen. Here are the specific details about engine vibration visible to the naked eye in a Volkswagen: Engine Vibration: Whether the engine is cold or warm, you can see the engine vibrating when you open the hood during idle. Differences: The only difference is that the vibration is more severe when the engine is cold, while it is less noticeable when the engine is warm. However, inside the car, you may feel slight vibrations in the seat and steering wheel when the engine is cold, whereas when the engine is warm, the vibrations inside the car are almost imperceptible or very, very slight, nearly negligible. Additionally, yesterday, when applying a coating to the car, pressing on the front grille was noticed.
Was this review help?
3
4
Share
DelEthan
08/12/25 9:42am
I've been driving for over ten years and have owned several Volkswagen models, from the Golf to the Passat. Some slight vibration at idle is normal—it's just the natural movement of the engine running, and you might notice a bit of shaking, though not obviously. But if the vibration is so strong that the hood is visibly bouncing or you feel numbness in your hands from the steering wheel, that's a problem. Possible causes include worn-out engine mounts, uneven ignition due to carbon buildup on the spark plugs, or a loose belt. Last year, my car had severe vibrations, and it turned out to be a faulty ignition coil—replacing it for a few hundred bucks fixed the issue. If left unfixed, the engine will wear faster, fuel consumption will increase, and in severe cases, it could lead to a breakdown on the highway, which is dangerous. I recommend visiting a professional shop early—technicians can quickly diagnose the root cause with a scanner in just a few minutes. Also, when washing your car, wipe down the engine bay to reduce oil buildup, which can help minimize vibrations. Don’t skip regular maintenance; check your car’s condition at least every six months to prevent problems before they arise.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

Do Front and Rear Brake Pads Need to Be Replaced Simultaneously?

Front and rear brake pads do not need to be replaced at the same time, as they have different replacement cycles. Generally, rear brake pads have a longer service life compared to front brake pads. Below are the conditions for replacing car brake pads: I. Normal Conditions: 1. Front brake pads typically need replacement after 30,000-50,000 kilometers of driving. 2. Rear brake pads usually require replacement after 60,000-100,000 kilometers of driving. II. Special Conditions: 1. Beginners tend to use brakes more frequently, leading to higher wear. 2. Automatic transmission vehicles consume brake pads faster than manual transmission vehicles, as gear shifting relies on the accelerator and brake pedals. 3. Vehicles primarily driven in urban areas experience faster brake pad wear compared to those driven on highways, due to more frequent braking in city traffic. 4. Heavier vehicles cause greater brake pad wear. When decelerating at the same speed, heavier vehicles have greater inertia, requiring more friction force from the brake pads, resulting in increased wear.
2
5
Share

What does stage 1 car tuning mean?

Stage 1 car tuning refers to improving engine performance by modifying ECU software parameters without changing any hardware components. Below is expanded information about stage 1 car tuning: 1. Stage 1 ECU tuning involves adding the most basic ECU program to the vehicle's original factory ECU, thereby increasing horsepower and torque. This only requires matching with the original factory hardware. 2. Stage 2 tuning refers to adapting an ECU program that has been debugged for certain modified hardware and adding it to the original factory ECU. Compared to stage 1, it significantly increases power, resulting in noticeable performance improvements. However, it may cause some damage to the car's hardware and increase the load on the components. 3. Stage 3 tuning involves extensively reprogramming the ECU, installing larger turbos and intercoolers, and replacing some high-strength parts. After such modifications, the engine undergoes substantial stress, which may shorten its lifespan to some extent.
15
3
Share

How often should the transmission fluid in a Tiida be replaced?

The replacement interval for the transmission fluid in a Tiida is 32,500 kilometers or 39 months. Transmission fluid is an oil product that maintains the cleanliness of the gear system, ensuring the proper functioning of the transmission and extending the lifespan of the transmission components. Below is an introduction to the methods for replacing the transmission fluid in a Nissan Tiida: 1. Gravity Drain: Similar to the principle of changing engine oil. Using tools to loosen the drain plug, the transmission fluid will automatically flow out under gravity. This method is the most common and easy to perform, but it cannot completely drain all the transmission fluid. Some fluid remains due to mechanical structures such as recesses and depressions that create dead spots. 2. Machine Flush: New transmission fluid is added to a flushing machine, which is connected to the transmission's fluid circuit. The pressure from the new fluid pushes out the old fluid, resulting in a cleaner flush of the fluid circuit. The more new transmission fluid used in the machine flush, the more thoroughly the old fluid is removed. A machine flush typically uses about 10-15 liters of fluid and takes approximately 1 hour to complete. 3. Oil Pan Removal: This method allows for cleaning the oil filter and flushing the oil pan, addressing the issue at its root. Removing the oil pan is a significant task, and the associated labor costs will be higher.
6
4
Share

Should the Red and Yellow Dots on Tires Face Outward?

The yellow and red dots on tires should face outward. When installing tires, the side that should face outward is usually marked with the word 'outside'. The yellow dot indicates the lightest point of the tire, while the red dot represents the heaviest point. Here are some precautions regarding tire replacement: 1. The yellow and red dots should align with specific positions on the rim: There are slight variations in the manufacturing process, so the weight distribution around the tire is not uniform. 2. After replacing tires, it's essential to perform a dynamic balance on all four wheels: Without proper balancing, the wheels may vibrate or shake when driving at high speeds.
11
1
Share

Which country does Porsche originate from?

Porsche is an automobile manufacturer originating from Stuttgart, Germany. More information about Porsche is as follows: 1. Founded in Stuttgart in 1931, Porsche is renowned worldwide for producing high-end sports cars. Its founder, Ferdinand Porsche (also known as Ferdinand Borsche), is a celebrated designer in the global automotive industry. 2. Porsche's lineup includes sports cars, SUVs, and sedans. The sports cars are the 911 and 718, the sedans are the Taycan and Panamera, and the SUVs are the Macan and Cayenne. 3. The Porsche emblem adopts the coat of arms of Baden-Württemberg, where Stuttgart is located. The emblem features the black, red, and yellow colors of the German flag as its background. The galloping horse in the center and the word 'Stuttgart' above it reflect the region's reputation as a breeding ground for renowned horses since the 16th century. The antler patterns in the top left and bottom right corners signify that the area was once a hunting ground. The yellow stripes in the top right and bottom left represent the color of ripe wheat ears, symbolizing fertile land and the happiness it brings to people. The red color symbolizes wisdom, and the entire emblem showcases Porsche's glorious history and promising future.
13
1
Share

Why is the Accord D gear indicator light flashing continuously?

D gear is the forward gear, also known as the drive gear. In this gear, the transmission automatically shifts between 1st gear and overdrive based on speed and throttle conditions, and is used for normal road driving. The flashing gear indicator light indicates that the vehicle has detected an internal transmission fault, triggering a time-limited protection that restricts gear shifting or high-speed functions. The reasons for the continuous flashing of the Accord D gear indicator light include: 1. The steering wheel is in a locked position. 2. Poor signal from the 2nd gear clutch pressure switch causing the D position indicator to flash. 3. Excessive input from the shift solenoid. 4. Electrical control failure in the transmission.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.