Is It Normal to Have Moisture Inside the Headlights?

1 Answers
RemingtonLynn
07/29/25 10:31am
No, it is not normal. Here are the relevant explanations: 1. Large temperature differences in winter can cause condensation inside the headlights: In the structure of car headlights, there is a ventilation tube connected to the outside. Its purpose is to allow the expanded gas inside the headlights to escape when the headlights are turned on and the temperature rises. When the headlights are turned off, the temperature drops, creating a pressure difference inside, which draws in outside air through the ventilation tube. If the air is humid, it can cause condensation inside the headlights, forming moisture. 2. Moisture is likely to form after heavy rain or car washing: If care is not taken during car washing, such as directly spraying the engine compartment or headlights with a high-pressure water jet, water droplets can flow directly inside. When the vehicle wades through water, since the engine and exhaust system are significant heat sources, rainwater falling on them can generate a large amount of steam. Some of this steam may enter the headlights through the ventilation tube.
Was this review help?
2
0
Share
More Forum Discussions

Where is the carbon canister solenoid valve located on the Odyssey?

The carbon canister solenoid valve on the Odyssey is located at the rear underside of the vehicle. You can see it by lifting the car. Major symptoms of a faulty carbon canister solenoid valve: Abnormal noises while driving: When the engine is running at non-idle speed, i.e., above 800 RPM, you may sometimes hear a "clicking" sound. Fluctuating idle speed: After starting the engine, the idle speed may fluctuate rhythmically, accompanied by poor acceleration. This could indicate a problem caused by blockage in the carbon canister's air inlet or filter screen. Engine stalling or difficulty starting: The engine may be hard to start, or it may start but immediately stall.
19
4
Share

What are the dimensions of the Volkswagen T-Roc?

The dimensions of the Volkswagen T-Roc are 4318mm in length, 1819mm in width, and 1582mm in height, with a wheelbase of 2680mm. Appearance: The Volkswagen T-Roc features a body with a contrasting light and dark color design, wheels matching the body color, prominent wheel arches with black trim, and a dual-tone interior design, all of which highlight the dynamic visual appeal that the T-Roc aims to create. The body of the Volkswagen T-Roc adopts a "Type Aesthetics" design, breaking away from Volkswagen's traditional family styling and fully incorporating design elements from the overseas version of the model. Configuration: The Volkswagen T-Roc is equipped with three engines: a 1.2-liter turbocharged engine, a low-power version of the 1.4-liter turbocharged engine, and a high-power version of the 1.4-liter turbocharged engine.
6
1
Share

Do I Need to Add Engine Anti-Wear Additive Every Maintenance?

It is not necessary to add anti-wear additive every maintenance. It is optional. Car maintenance should not be neglected, especially the maintenance of the car engine. The engine anti-wear protection agent is equivalent to the nutrition of the engine, which can protect the health of the engine to a certain extent and extend the service life of the engine. The engine anti-wear additive is an engine oil additive, which has stronger adhesion, better heat resistance and corrosion resistance than engine oil. It can adhere to the cylinder wall to form a protective film, enhance the lubrication effect, repair the scratches on the cylinder wall, smooth the rough surface, ensure the normal high-speed operation of the engine, and play a role in maintenance and repair. The anti-wear additive also has a cleaning effect, which can dissolve excess fuel, impurities and carbon deposits in the cylinder, so that the high-temperature and high-pressure oil and gas in the cylinder can be fully burned without other impurities.
9
2
Share

How to Use the Mercedes Sunroof Sunshade?

Below are the instructions for using the Mercedes sunroof sunshade: 1. Open the sunroof: Fully open the Mercedes sunroof by pulling the switch backward and holding it for 10 seconds. 2. Close the sunroof: Fully close the sunroof, then push the switch and hold it for 10 seconds. Here is additional information on handling water ingress in a car sunroof: 1. Check the drainage holes: Determine if the sunroof drainage holes are clogged by observing the drainage situation. 2. Clogged drainage tube: Visit a professional repair shop promptly to avoid greater damage. 3. Water ingress in the sunroof: This may be caused by aging sealing strips, which require timely inspection.
11
0
Share

How Long Does It Take to Pick Up a Car in Another City?

If the car is locally transferred in the same city where it is purchased, it usually takes three working days, but the actual time may vary. Below is additional information: Differences between picking up a car in another city and locally: Lower prices in other cities: Competition among car dealers in the same region is usually very intense, and some brands have regional protection policies for vehicle sales. Dealers may offer different discounts for local buyers versus out-of-town buyers. Different conditions of the new car: Generally, cars picked up locally are delivered directly by the manufacturer and remain in brand-new condition. However, when picking up a car in another city, the vehicle is often driven back, meaning the new car may have already traveled a certain distance by the time it is delivered to the buyer.
1
2
Share

Does the Envision have an oil burning issue?

Envision does have an oil burning phenomenon. When engine oil burns, the first thing to check is whether there's an issue with the engine crankcase ventilation pipe. Additionally, it's necessary to consider whether the piston rings or valve stem seals are damaged. For a new Buick Envision burning oil, the lubrication function of engine oil is to reduce friction resistance between relatively moving parts such as piston rings and cylinder walls when the engine is running, thereby slowing down wear. A thin oil film forms on the inner wall surface of the cylinder. During the combustion process of the air-fuel mixture, part of this oil film gets burned along with the high-temperature combustion gases. The steam generated by the high-temperature oxidation of engine oil will also draw a small amount of oil vapor into the combustion chamber through the crankcase ventilation system to be burned. Therefore, it's normal for some oil consumption to occur within a regular maintenance cycle.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.