Is it normal to fill 52 liters in a 50-liter fuel tank?

1 Answers
AutumnLee
07/30/25 6:18am
It is normal to fill 52 liters in a 50-liter fuel tank because the actual capacity is slightly larger. Here is some relevant information: 1. Fuel tank capacity: Generally, small cars have a fuel tank capacity of 35-45 liters, while medium-sized cars have a capacity of 55-75 liters. The size of the fuel tank depends on the vehicle's displacement—larger fuel consumption means a larger tank, and smaller consumption means a smaller tank. 2. Fuel tank design range: The design of a car's fuel tank capacity typically allows for a driving range of 400~600 kilometers. Lighter cars with smaller displacements have correspondingly smaller fuel tanks, while heavier cars with larger displacements have larger tanks, but the maximum range on a full tank is usually around 400~600 kilometers. 3. Fuel tank capacity measurement unit: The international standard uses L (liters) as the unit for measuring a car's fuel tank capacity. Different countries also have their own standards for fuel tank capacity.
Was this review help?
11
4
Share
More Forum Discussions

What is the score range for B1?

B1 ranges from 90 to 94 points. Here is relevant information about B1: 1. Definition: The B1 driver's license permits driving medium-sized buses, defined as vehicles not exceeding 6 meters in length with a rated passenger capacity of 10 (inclusive) to 19 (inclusive) people. 2. Application Requirements: Height must be at least 150 cm, uncorrected or corrected visual acuity must reach 5.0 or above on the logarithmic visual acuity chart, no red-green color blindness, ability to distinguish sound source direction with each ear 50 cm from a tuning fork, both thumbs intact, at least three fingers intact on each hand, and normal limb and finger motor function.
1
4
Share

What is the Function of Automotive Sensors?

Automotive sensors serve to convert various operational condition information of a vehicle during operation, such as speed, temperatures of different mediums, and engine operating conditions, into electrical signals that are transmitted to the computer. This ensures the engine operates in its optimal state. Below is an introduction to sensors: 1. There are many types of automotive sensors. Based on their functions in vehicles, they can be categorized into temperature measurement sensors, pressure sensors, flow sensors, position sensors, vehicle speed sensors, distance sensors, etc. 2. Each sensor has its specific role. If a sensor fails, the corresponding device may not function properly or even cease to operate, thereby affecting the vehicle's performance.
17
5
Share

What to Do When the Buick Excelle Trunk Won't Open?

If the trunk of your Buick Excelle won't open, you need to check the following 3 points: 1. Whether the lock block is damaged; 2. Check if the screws of the lock block and latch are loose; 3. Check if the locking mechanism is damaged. If any of the above issues are found, you should take the car to a repair shop for servicing. Normally, the trunk can be opened using the trunk button on the remote key, or you can try pressing the button on the driver's side door panel to open the trunk. In models with fixed, non-foldable rear seats, there is an emergency trunk release handle located under the central cover behind the rear seats. Open the cover and pull the rope handle inside to open the trunk.
4
2
Share

What is Turbine Oil?

Turbine oil, also known as turbine lubricating oil, typically includes steam turbine oil, gas turbine oil, hydraulic turbine oil, and antioxidant turbine oil. It is primarily used for lubricating the sliding bearings, reduction gears, governors, and hydraulic control systems of turbines and their associated units. The detailed introduction is as follows: 1. Functions: The main roles of turbine oil are lubrication, cooling, and speed regulation. 2. Performance: Based on the functional characteristics of turbine oil, to ensure the safe and economical operation of turbine units, turbine oil must possess: excellent oxidation stability; appropriate viscosity and good viscosity-temperature characteristics; good demulsibility; excellent rust and corrosion prevention; good foam resistance and air release properties.
2
4
Share

How to Drain Windshield Washer Fluid?

Windshield washer fluid can be drained using the following two methods: 1. Use the siphon principle to extract the fluid: Open the engine hood, locate the black plastic tube on the cover (which is the washer fluid tube), remove the nozzle, point it outward from the vehicle, and keep spraying. (Note: While draining the fluid, you can simultaneously clean the windshield to avoid waste.) 2. Perform the siphon method: Siphoning utilizes the phenomenon of liquid level height difference. After filling an inverted U-shaped tube structure with liquid, place the higher opening end into a container filled with liquid. The liquid in the container will continuously flow out through the siphon tube from the lower opening.
17
5
Share

Can the Rearview Mirror Be Adjusted If It's Too Low?

The position of the rearview mirror cannot be moved if it's too low, but you can adjust the small ball behind the mirror up, down, left, or right to achieve the desired angle for the driver. Before adjusting the rearview mirror, it's essential to sit in your usual and comfortable driving position. The basic principle of seat adjustment is to ensure comfort, clear visibility, and easy access to the steering wheel. The primary function of the rearview mirror is to judge distances, including the distance between your car and the vehicle behind you, as well as the distance to obstacles when reversing. Maintaining proper distance from surrounding vehicles while driving can significantly reduce the likelihood of traffic accidents. If the vehicle in front brakes suddenly, the driver can use the rearview mirror to observe the vehicle behind and adjust the driving distance accordingly to avoid rear-end collisions.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.