Is it normal to fail Subject 3?

1 Answers
Sarah
07/29/25 9:13pm
It is normal. Subject 3 in the driver's license test is one of the more challenging subjects in the examination process and requires diligent practice. Below is relevant information: Introduction: Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test, which are part of the motor vehicle driver's license assessment. It is the abbreviated name for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed. Specific test content for Subject 3: The road driving skills test generally includes: preparation before getting on the car, simulated lighting test, starting, driving in a straight line, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and driving at night. The safety and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, methods for handling emergencies such as tire blowouts, and knowledge of post-accident procedures.
Was this review help?
7
0
Share
More Forum Discussions

Do Rear Seat Passengers Need to Wear Seat Belts on Highways?

Rear seat passengers on highways are required to wear seat belts. Article 51 of the Road Traffic Safety Law of the People's Republic of China stipulates that when a motor vehicle is in motion, both the driver and passengers must use seat belts as required. Seat belts must be fastened if available. Below are precautions for highway driving: 1. Maintenance: Before driving on the highway, conduct a comprehensive inspection of your vehicle, paying special attention to tire pressure and brake discs. Additionally, check the engine before entering the highway—it's advisable to perform a full vehicle maintenance. 2. Safety: Always prioritize personal safety. Avoid certain driving hazards, such as staying clear of large trucks, especially those carrying cargo. Large trucks can obstruct your view, making it difficult to assess road conditions. 3. Habits: Develop good safety habits. Always remember to fasten your seat belt because sudden braking at high speeds can cause passengers to be thrown forward due to inertia if not properly restrained.
17
4
Share

Is It Necessary to Turn Off the Engine When Getting Off the Car in Subject 3 Test?

In Subject 3, only the roadside parking section requires turning off the engine; in other sections, the vehicle is not allowed to be turned off. Below are the precautions for the Subject 3 test: 1. Clutch Pedal: It should only be used when starting, shifting up, shifting down, or stopping. Do not press the clutch during normal driving. When encountering situations requiring slight speed reduction, only press the brake to avoid coasting. 2. Accelerator Pedal: Before the green light turns red, it will flash a few times. At this point, depending on the distance to the intersection and the vehicle speed, press the accelerator if the distance is short and the speed has not decreased. 3. Straightening and Parking: Upon hearing the command, assess the road conditions. If there are no solid lines or if you are too close to the intersection, quickly turn on the right signal, check the rearview mirror, brake to reduce speed, and merge. Position the car slightly to the right of the road center, turn the left wheel back, and when the car can straighten by inertia, press the clutch. Once the car is straight, turn the wheel right to straighten and park.
6
0
Share

What Causes Windshield Fogging?

Windshield fogging is caused by the temperature difference between the inside and outside of the vehicle. Below are specific solutions to address interior fogging: 1. Proper Use of the Air Conditioning System: Park the car, turn on the air conditioning, adjust the temperature control to the warm air setting, and press the defrost button. Use the warm air from the AC to dry the fog on the windshield. During defogging, switch the AC to external circulation to allow fresh air to enter the cabin. Setting the compressor and fan speed to 25°C or higher can speed up the defogging process. 2. Use Specialized Anti-Fog Products: Before each use, spray the product evenly on the window and wipe it clean to form a transparent protective film on the glass, preventing fog formation. One application can prevent fogging for about 10 to 15 days. 3. Cold and Warm Air Convection: If the fogging is not severe, slightly open the side windows to allow air convection inside the car. This will gradually equalize the interior temperature with the outside temperature, causing the fog to dissipate.
6
4
Share

What does the highway ETC system refer to?

Highway ETC (Electronic Toll Collection) translates to electronic toll collection, which is a non-stop toll collection system. On highways, there will be one or more ETC lanes. ETC charging method: Through dedicated short-range microwave communication between the vehicle-mounted RFID tag installed on the vehicle's windshield and the microwave antenna on the ETC lane of the toll station, the system connects with the bank for background settlement processing via network technology, thereby achieving the purpose of vehicles passing through bridge and road toll stations without stopping to pay tolls. Banks install this type of ETC express card with a 'pass first, charge later' approach. ETC application conditions are as follows: Provide the original and photocopy of the vehicle owner's valid ID card and vehicle registration certificate. The photocopy of the driver's license must include the page with the most recent annual inspection seal; Postal credit card application form. This credit card is used to bind the ETC card. After obtaining the credit card, swipe it twice and present the POS receipt to the designated postal outlet to receive and install the ETC onboard device for free, with no charges during the process; Be between 18 and 60 years old; Own a vehicle under your personal name. Below are precautions for ETC installation: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a large rearward angle of the windshield, which reduces the driver's field of vision. If ETC installation does not consider this, it will increase the driver's blind spots. Install it on the right side behind the rearview mirror to avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, avoid installing it on the blackened areas of the windshield or positions that may block the solar panel. Do not remove it randomly once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the anti-removal lever in. If removed randomly, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the vehicle ahead. The ETC lane recognition speed is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle's device information, leading to charging failure. When using a debit card bound to ETC, insufficient balance will also cause charging failure.
11
1
Share

Is there a toll on highways during the Mid-Autumn Festival holiday?

Normally, highways are tolled during the Mid-Autumn Festival holiday, and no free passage is implemented. Below are the specific details about free highway passage: 1. Free passage periods: In 2021, the toll-free periods for highways were during the Spring Festival, Qingming Festival, Labor Day, and National Day, totaling 4 national statutory holidays, as well as the consecutive holidays determined by the State Council for these statutory holidays. 2. Eligible vehicles: The vehicles eligible for free passage are passenger vehicles with 7 seats or fewer (including 7 seats) traveling on toll highways, including motorcycles permitted to travel on ordinary toll highways.
4
3
Share

What is the NEDC combined fuel consumption of BMW?

NEDC combined fuel consumption serves as the reference standard for electric vehicle range testing in China. The NEDC test cycle consists of two parts: ECE (Urban Driving Cycle) and EUDC (Extra Urban Driving Cycle). Purpose of ECE: Used to simulate traditional urban road conditions, composed of 4 ECE15 cycles. Each ECE15 cycle includes 15 driving conditions such as acceleration, deceleration, constant speed, and idling. The ECE duration is 780 seconds, with a total driving distance of 4.052 km, an average speed of 18.7 km/h, featuring characteristics of low speed, low load, and low exhaust temperature. Purpose of EUDC: EUDC is used to simulate suburban road conditions, with a duration of 400 seconds, a driving distance of 6.955 km, an average speed of 62.6 km/h, and a maximum speed of 120 km/h in this segment.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.