Is It Normal to Fail Subject 2 Twice?

1 Answers
VonMicah
07/30/25 7:49am
Failing Subject 2 twice is normal. There are a total of 5 exam attempts for Subject 2, and if you fail twice, you still have 3 attempts left. At this point, it's crucial to maintain a positive mindset, gather your emotions, and avoid giving up. Remember, many students pass only on their 5th attempt, so don't lose hope until the very end. Here are some tips to help you pass Subject 2: Learn from mistakes and summarize experiences: It's important to learn from your failures and identify the reasons behind them. Understand which parts of Subject 2 are more prone to errors, which skills you haven't mastered yet, and what caused the mistakes. Additionally, discuss any doubts with your instructor or peers to ensure you don't repeat the same errors in your 3rd attempt. Pay attention to details and avoid basic mistakes: Having taken the test twice, you've likely practiced many times and are familiar with the procedures of each section. The reason for not passing might be overlooking certain details, such as incorrect seating posture, poor clutch control, or misaligned reference points. Many students often fail due to these basic mistakes.
Was this review help?
9
5
Share
More Forum Discussions

How to Adjust the Brightness of the Lynk & Co 01 Central Control Screen?

The brightness of the Lynk & Co 01 central control screen can be adjusted using the small vertical wheel located below the instrument panel on the left side of the driver's door. Simply roll the wheel up or down to adjust the brightness. Here is more information about the Lynk & Co 01: 1. The Lynk & Co 01 is the first model developed based on the CMA (Compact Modular Architecture) platform. Designed to cater to the different lifestyles and characteristics of urban groups, the Lynk & Co 01 offers four distinct styles and configurations—"Shine, Style, Power, Pure"—for consumers to choose from. 2. The Lynk & Co 01 features a comprehensive NVH (Noise, Vibration, and Harshness) luxury configuration, which helps prevent noise and vibration at the source, blocks noise transmission paths, and optimizes sound quality for a purer and more stable frequency. Additionally, it is equipped with an INFINITY Hi-Fi-grade 10-speaker audio system with a total power output of 360W, providing an exceptional auditory experience for passengers.
1
3
Share

What is the difference between BYD F0 with and without a small meter?

BYD F0 with a small meter refers to the tachometer, which is not available in the base model but is included in the higher-end model. The BYD F0 is a premium compact car launched by BYD. It features a stylish design and is equipped with the BYD371QA high-performance eco-friendly engine developed by BYD. With a displacement of 1.0L, it meets the National IV emission standards and has a fuel consumption of only 4.2L per 100 kilometers. In terms of safety features, the F0 comes with dual airbags, ABS, power steering, and more. Additional Information: 1. Content One: Tachometers are typically divided into several zones. The white scale indicates the safe RPM range, while the red scale marks the dangerous RPM range. Some models also include a green zone, which indicates the most fuel-efficient RPM range for the engine. 2. Content Two: As long as the engine RPM does not enter the dangerous range, it is considered normal. However, it is important to ensure that the RPM matches the current gear. Otherwise, driving at high RPM in low gear or low RPM in high gear can cause unnecessary damage to the vehicle.
7
2
Share

How to Open the Fuse Box Cover in the Cab?

Inside the cab, under the dashboard, to the right of the steering column, there is a black box about 7 inches in size. Do not unscrew any screws; simply pry open the cover by hand. Alternatively, you can remove the steering wheel first, then take off the combination switch, unscrew the bolts beneath the box, and use a flat-head screwdriver to gently pry open the gap to access the fuse box. Here is some related information about the fuse box: 1. There are two fuse boxes in total. One is located at the end of the driver-side instrument panel. You can replace the fuses by prying open the cover with a hard plastic tool or a pry tool. This fuse box mainly controls various units inside the vehicle. 2. The other fuse box is located in the engine compartment, primarily controlling external systems and working units in the engine bay. Press to release the cover for removal. A fuse puller is also stored here. 3. After replacing a faulty fuse, close the fuse box cover and press it to ensure it snaps into place. If not properly closed, it may lead to malfunctions. Additionally, some fuses in the engine compartment fuse box are non-functional and can be used as spares.
9
1
Share

How to Align the Vehicle Straight in Subject Two?

Each individual's height and weight vary, so the suitable seat height differs from person to person. Adjust the rearview mirror button until the rear wheels are clearly visible, then slowly raise it until the rear door handle is positioned at the halfway point of the mirror. Guidance arrows. These can serve as reference points for maintaining a 30 cm distance in Subject Two maneuvers such as parallel parking, right-angle turns, and hill starts.
14
2
Share

Can You Still Drive with an Engine Control System Malfunction?

You can continue driving with an engine control system malfunction. Vehicles are designed with emergency measures for the engine system. If the warning light is on, you can still drive, but you should avoid high speeds. Over time, emission control may not function properly, and fuel economy may decrease, but this has little impact on the control system. As long as you drive slowly, there should be no major issues. Here is additional information: Exhaust Gas Recirculation (EGR): The exhaust gases from an internal combustion engine after combustion contain very low or no oxygen. When these gases mix with the intake air, they reduce the oxygen concentration in the intake air, leading to the following effects: Lower Temperature: The lower oxygen content compared to atmospheric air results in lower combustion (peak) temperatures, which helps suppress the formation of nitrogen oxides (NOx). When combustion temperatures decrease, heat transfer to the cylinder and combustion chamber walls, as well as the piston surface, is reduced. Additionally, losses due to thermal dissociation are slightly minimized. Fuel Engines: In fuel engines operating under partial load and without EGR, the throttle must open wider to provide the same amount of oxygen (to achieve the same output). This results in lower intake pumping (throttle) losses during air intake, improving fuel economy.
19
0
Share

Which has the right of way when vehicles meet on a mountain slope: the ascending or descending vehicle?

When vehicles meet on a mountain slope, the descending vehicle should yield to the ascending vehicle. Here are the specific details: When both ascending and descending vehicles are at opposite ends of the slope: If the descending vehicle proceeds first, its higher speed could lead to more severe consequences in case of a collision. Conversely, if the ascending vehicle moves first, any potential collision would likely result in less severe outcomes. When both vehicles are at some midpoint on the slope: Requiring the ascending vehicle to stop and yield to the descending vehicle poses greater driving difficulty, especially for novice drivers or vehicles in poor condition, potentially causing stalling (which wastes national resources and slope usage efficiency, and may cause traffic congestion). If the ascending vehicle rolls backward, it might collide with the descending vehicle. In contrast, it's much simpler for the descending vehicle to yield, as it can brake at any time and easily continue descending afterward. Additional information: According to Article 48, Clause 3 of the "Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China": On narrow slopes, the ascending vehicle has the right of way. However, if the descending vehicle has already entered the slope while the ascending vehicle has not yet started ascending, the descending vehicle should proceed first. This regulation considers that ascending vehicles are more prone to stalling, which could lead to traffic accidents.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.