Is It Normal for Wheel Brake Discs to Rust?

1 Answers
KendraLynn
07/24/25 2:21pm
It is normal for car brake discs to rust. Here is a detailed introduction about it: 1. Slight rust: Slight rust often occurs. For example, after the car is left out in the rain overnight or after washing when the car is not dried properly, slight rust can easily form. In such cases, continuous braking while driving can help remove the rust, as the brake disc rubs against the brake caliper during braking, and the rust will be worn off after multiple brakes. 2. Severe rust: If the brake disc has severe rust, the entire surface of the brake disc will have a relatively thick layer of rust. Stubborn rust can also accelerate the wear of the brake pads, so it is necessary to take the car to a repair shop to have the brake disc polished.
Was this review help?
8
4
Share
More Forum Discussions

Why Does the Car Make a Squeaking Noise When Going Over Speed Bumps While Cold?

The reasons for the squeaking noise when a cold car goes over speed bumps are: 1. The shock absorber rubber pads are too cold and lose elasticity; 2. Aging of the lower control arm bushings and stabilizer link bushings; 3. The bushings at both ends of the shock absorber are made of materials like polyurethane or hard rubber, which harden and create gaps when cold. Speed bumps are traffic facilities installed on roads to slow down passing vehicles. They come in strip or dot shapes and are made of rubber or metal, with alternating yellow and black colors for visual attention. They slightly raise the road surface to achieve the purpose of slowing down vehicles. They are placed at road intersections, industrial and mining areas, schools, residential areas where vehicles need to slow down, and sections prone to traffic accidents. They are specialized safety installations designed to reduce the speed of motor vehicles and non-motor vehicles.
11
1
Share

How to Permanently Disable the Auto Start-Stop Function in BMW?

To permanently disable the auto start-stop function in BMW, simply press the 'AOFF' button. When the button light is on, it indicates that the start-stop function is deactivated. The auto start-stop function serves the following purposes: 1. Automatically controls engine shutdown and restart; 2. Reduces emissions and improves fuel economy; 3. Minimizes engine idle time by providing power to the engine cooling fan and cabin air conditioning via the electrical system when the engine is off. Taking the 2021 BMW 525Li as an example, its body dimensions are: length 5106mm, width 1868mm, height 1500mm, with a wheelbase of 3105mm and a fuel tank capacity of 68 liters.
16
3
Share

How long can you drive without registering a newly purchased car?

You can drive without registration for up to three months. A new car can be issued temporary license plates up to three times, with each temporary plate valid for a maximum of one month. Temporary plates have time and regional restrictions. Temporary plates with a light blue background are only valid for driving within the city limits. Driving outside the city limits with such a plate may result in penalties if caught, so be cautious! Temporary plates with a brown-yellow background allow for intercity driving. Generally, temporary plates can be applied for up to three times. The use of temporary license plates is subject to time limits and regional restrictions. Once the temporary plate expires and the vehicle is still unregistered, it cannot be driven on the road.
6
0
Share

Why can't DOT5 brake fluid be used?

Since DOT5 grade brake fluid is a silicone-based brake fluid, compared to DOT3 grade (which has strong water absorption), DOT5 almost completely does not absorb water. However, precisely because of its strong repulsion to water, the moisture that enters the brake fluid lines cannot mix well with it. In other words, the fluid and water will coexist as two separate components. Compared to brake fluid, water has a very low boiling point, so this unabsorbed moisture can cause a rapid decline in braking performance. It degrades even faster than DOT4, requiring replacement approximately every six months. Therefore, silicone-based DOT5 has a very limited range of applications. Currently, it is only found in military and racing fields, and it is very difficult to find DOT5 brake fluid for sale in the civilian market.
11
2
Share

What is the method for disassembling a car navigation system?

Navigation disassembly method is: 1. Start the car and confirm normal vehicle condition information; 2. Remove the air conditioning vents; 3. Pull out the air conditioning control panel and vehicle information panel; 4. Use a plastic pry tool to loosen the navigation system, then remove the dashboard plastic components; 5. Take out the storage compartment and disconnect the wiring harness to complete the navigation disassembly. Navigation modes include: 1. Route search customization mode; 2. Station setting mode; 3. Map positioning mode. Navigation functions include: 1. Search and processing of map data; 2. Map matching; 3. Route planning; 4. Human-machine interface; 5. Wireless communication.
11
5
Share

What is the Difference Between Full Synthetic and Semi-Synthetic Engine Oil?

Full synthetic oil and semi-synthetic oil differ in the following aspects: 1. Full synthetic oil has a wider operating temperature range and longer service life; in terms of oil film requirements, synthetic oil can achieve the same effect as semi-synthetic oil with higher viscosity but at a lower viscosity. 2. Semi-synthetic oil is inferior to full synthetic oil in terms of high-temperature fluidity and viscosity. However, semi-synthetic oil performs slightly better in terms of cleaning properties. Therefore, it is not recommended for performance cars or turbocharged vehicles to use semi-synthetic oil. 3. Using semi-synthetic oil may result in insufficient engine cooling, accelerated component wear, and rapid carbon deposit formation.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.