Is It Normal for Water to Enter Both Front Headlights of the Changan Eado?

1 Answers
LaKai
07/29/25 2:11pm
It is not normal for water to enter both front headlights of the Changan Eado. Water ingress in the headlights may be caused by cracks in the headlight, improper installation of the headlight rear cover, or aging/damage of the headlight sealing ring. It is recommended to contact the local 4S store for inspection and repair. The solutions are as follows: 1. Negotiate with the 4S store or the manufacturer. You can report the issue to the relevant department and wait patiently, while keeping your phone and other communication devices accessible for the manufacturer's staff to contact you. 2. Remove the headlight cover, thoroughly dry it, and then reseal the headlight cover, applying multiple layers of sealant. The technical part of this method involves removing the headlight cover. If you are not very skilled, it is advisable to have it handled by a professional repair shop for a more reliable solution.
Was this review help?
13
1
Share
More Forum Discussions

What are the tips for curve driving in Subject 2?

When the examinee drives the test vehicle into the curve driving test area, there will be a voice prompt inside the car: 'Next test item: curve driving.' The test begins after hearing the instruction. The details are as follows: 1. Front of the car: Pay attention to the position of the front of the car when entering the curve. Try to keep the outer front tire of the vehicle close to the right edge line of the curve. Use the rearview mirror to judge the distance from the edge line to avoid crossing it. Proceed in first gear with semi-clutch engagement, and the speed can be slowed down but not stopped. During the vehicle's movement, observe the left and right rearview mirrors to control the distance from the edge line. 2. Left turn: Usually, the first curve is a left turn. Keep the vehicle as far to the right as possible. When the left corner of the car aligns with the right edge line, turn the steering wheel one circle to the left and make slight adjustments. When the left corner of the car and the right edge line are basically aligned, turn left to avoid crossing the line during the turn. 3. Right turn: After passing the left curve, prepare to turn right. When the left corner of the car gradually completes the right edge line of the left turn, and the right vertex of the hood touches the left edge line of the right turn, straighten the steering wheel.
9
3
Share

How to Use the Gears in a Manual Transmission Car?

Manual transmission car gear usage method: Start with first gear, then shift to second gear. When the speed reaches 20 km/h, shift to third gear, 35 km/h for fourth gear, and 50 km/h for fifth gear. The core of manual transmission lies in the close coordination between the accelerator and clutch, and being familiar with the clutch engagement point of the car. Vehicle acceleration in a manual transmission car involves upshifting while driving: first increase the speed to the required shifting speed, then press the clutch, shift gears, release the clutch while pressing the accelerator, and adjust the RPM appropriately. The most frequently used gear during driving is actually the neutral gear, because apart from switching between 1st and 2nd gears, all other gear shifts in a manual transmission must pass through neutral.
11
0
Share

Where is the air conditioning filter of the Buick New LaCrosse located?

Buick New LaCrosse's air conditioning filter is located inside the glove compartment on the passenger side. To replace the filter, you need to first remove the glove compartment and then open the cover of the air conditioning filter box. The replacement cycle for the Buick New LaCrosse air conditioning filter is every 10,000 kilometers. The car's air conditioning filter is very prone to accumulating a lot of dust, which can be blown away with compressed air or similar methods. Do not wash it with water, as it can easily be damaged. In terms of body dimensions, the Buick New LaCrosse measures 5000mm in length, 1858mm in width, and 1497mm in height. Exterior-wise, the car features a newly designed bumper, a large grille, and LED-decorated daytime running lights. The rear of the car has only minor modifications, including chrome-trimmed surrounds, dual exhaust pipes, and redesigned LED taillights, giving it a more dynamic appearance.
9
5
Share

What is the reason for the loose rear seat buckle?

The reason for the loose rear seat buckle is either a damaged buckle or the buckle not being aligned with the corresponding position. Here is a detailed introduction about car seats: 1. Overview: Car seats are the seats used when riding in a car. Classified by position, they can be roughly divided into: front seats: headrest, backrest, seat cushion, (armrest), rear seats: (headrest), backrest, seat cushion, side wings, (armrest). 2. Requirements: The arrangement of seats within the entire cabin should be properly planned. The shape design of the seats should conform to human physiological functions. The seats must be safe and reliable. Various adjustment mechanisms set up to meet the comfort of drivers and passengers should be equipped with reliable locking devices to ensure safety.
3
4
Share

What is the name of Cadillac's voice assistant?

Cadillac's voice assistant is called Cadillac. Below is an introduction to Cadillac: 1. Positioning: Cadillac, a world-renowned luxury car brand under General Motors of the United States, was born in 1902 (the Year of the Tiger) in Detroit, known as the Motor City of the United States. Over the past century, Cadillac has created numerous firsts in the automotive industry and established countless industry standards for luxury cars. It can be said that the history of Cadillac represents the history of American luxury cars. 2. Origin of the logo: An American car can be wild or luxurious, but it is quite difficult to achieve a sense of nobility. However, Cadillac is an exception. The founder, in order to commemorate the founder of Detroit, the French nobleman Antoine de la Mothe Cadillac, used his family's coat of arms as the car's logo.
8
5
Share

What is the size of an Audi steering wheel?

Steering wheel diameter is 37CM, circumference is 120CM. Below is relevant introduction about steering wheels:1. Function: The steering wheel is generally connected to the steering shaft via splines, its function is to convert the force applied by the driver on the wheel rim into torque which is then transmitted to the steering shaft. Using a larger diameter steering wheel allows the driver to apply less hand force when turning. The steering intermediate shaft serves as a connecting component between the steering gear and steering shaft, facilitating steering gear standardization while compensating for manufacturing and installation errors, making the installation of steering gear and wheel more reasonable in the vehicle.2. Structure: Framework, usually made of zinc alloy or aluminum alloy; Foaming, the foam material is produced in a foaming machine with the framework fixed inside during production.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.