Is It Normal for the Wuling Rongguang's Water Temperature to Stay at 5 Bars?

1 Answers
LailaRose
07/30/25 10:55am
It is not normal when the water temperature reaches 5 bars. It is recommended that the owner first check whether the coolant level in the auxiliary tank is within the specified range if the bar count remains unchanged. Below is extended information about the 5-bar water temperature: 1. Refilling the radiator timing: Under normal circumstances, the radiator will experience some consumption, and the level will not remain unchanged. Generally, it should be refilled every two to three months. A reading of 4 bars is considered normal. 2. Handling a 5-bar water temperature: When the temperature reaches 5 bars, the fan at the front of the vehicle starts working to cool down the water temperature, causing the bar count to change. It is recommended that the owner first check whether the coolant level in the auxiliary tank is within the specified range if the bar count remains unchanged. 3. Water temperature gauge design: The Wuling Rongguang's water temperature gauge has a unique design. Normally, it rises by one-third, meaning it is normal for it to be 2 bars short of the maximum. In contrast, the water temperature gauges of other vehicle models typically rise to only half, or one-half, of the maximum.
Was this review help?
4
1
Share
More Forum Discussions

What are the features of the 2011 Buick LaCrosse?

1. Electronic Stability Program (ESP): Effectively prevents loss of control situations such as skidding or fishtailing. It is generally not recommended for drivers to manually turn it off. 2. Parking Radar/Image: The central control screen displays a rearview image, and the radar will sound an alarm when detecting nearby obstacles. 3. Blind Spot Warning System (BSW): If there is another vehicle in the blind spot behind the car, the rearview mirror will flash a light to alert the owner. If the owner does not notice, an alarm will sound when a lane change is detected. 4. Forward Collision Mitigation System (FCM): If the distance to the vehicle ahead exceeds the safe distance while driving and danger is imminent, the dashboard will light up with a brake warning and sound an alarm. If the driver continues to press the brake pedal, the system will automatically brake to reduce the risk or severity of a collision.
3
5
Share

Can I switch back to 92 octane after filling my motorcycle with 95 octane?

You can switch back to 92 octane gasoline after filling your motorcycle with 95 octane. If there's some 95 octane gasoline left in the tank, it's perfectly fine to directly add 92 octane gasoline, as long as you're not intentionally mixing them. The differences between 92 and 95 octane gasoline are as follows: Different anti-knock properties: The gasoline octane rating represents anti-knock performance, with higher numbers indicating better anti-knock capability. Different octane content: 92 octane gasoline consists of 92% isooctane and 8% n-heptane, while 95 octane contains 95% isooctane and 5% n-heptane. The slightly higher price of 95 octane gasoline is due to its higher proportion of isooctane.
18
2
Share

How many kilometers can a full tank of gas last for the Tiggo 8 Plus?

Tiggo 8 Plus fuel tank, when fully filled, allows the car to travel approximately 600 kilometers under comprehensive road conditions, and around 800 kilometers when driving entirely on highways. Below are the details of the Tiggo 8 Plus: 1. Body Dimensions: The Tiggo 8 Plus has a length, width, and height of 4722/1860/1745mm respectively, with a wheelbase of 2710mm. It is 22mm longer than the Tiggo 8, with minimal changes in width and height. It supports three seating layouts: 5-seat, 6-seat, and 7-seat. 2. Vehicle Configuration: The high-end model of the Tiggo 8 Plus is equipped with 19-inch five-spoke alloy wheels, while the base model offers 18-inch wheels, with a design slightly inferior to the photographed model. The tires are Continental UltraContact UC6 235/50R19.
12
1
Share

What Causes Oil Leakage in Scooters?

This is due to the oil seal leakage at the rear axle. Below is relevant information: Introduction: The leaking fluid is gear oil, which is minimal in quantity, generally not exceeding 100 milliliters. Insufficient gear oil can severely damage the gears and bearings, so it's advisable to visit a motorcycle repair shop as soon as possible to replace this oil seal. Replacing this oil seal is somewhat complicated; it requires removing the exhaust pipe, rear wheel, and transmission cover, as well as taking off the belt and pulley. The gearbox must be opened to access the gears and gear shaft for replacement. Maintenance: The reasons for difficult cold starts can be found in various aspects of a motorcycle. Following the above approach for inspection may help identify the cause. Finally, a reminder to fellow riders: to reduce the probability of vehicle malfunctions, it is recommended to perform regular maintenance according to the maintenance manual. Only when the vehicle is in optimal condition can riding be more reassuring.
20
1
Share

What does BMW le mean?

In BMW 530le, the 'l' in le stands for long-version (extended version), and 'e' is the abbreviation for eDrive. Therefore, le refers to the extended version plug-in hybrid electric vehicle, representing plug-in hybrid. Plug-in Hybrid Electric Vehicle (PHEV): It is a type of new energy vehicle that falls between pure electric vehicles and traditional fuel vehicles. It has both the engine, transmission, drivetrain, fuel system, and fuel tank of a conventional car, as well as the battery, electric motor, control circuit of a pure electric vehicle. Moreover, it features a larger battery capacity and a charging port. Advantages of Plug-in Hybrid: It combines the benefits of both pure electric vehicles (EV) and hybrid electric vehicles (HEV). It can achieve pure electric, zero-emission driving while also extending the vehicle's range through hybrid mode.
19
0
Share

Is It Necessary to Return to Neutral When Shifting Gears?

When shifting gears in a manual transmission car, it is necessary to first return to neutral. This can significantly reduce the load on the transmission gears, thereby minimizing transmission wear. Below is detailed information about vehicle gear shifting: Definition: The vehicle transmission is one of the main components of the automotive powertrain system. Due to the highly complex real-world driving conditions, it is required that the driving force and speed of the car can vary over a considerable range. Moreover, since the output torque of the widely used piston engines is relatively small, a transmission is incorporated into the powertrain system. Precautions: Sludge in dirty oil can hinder the smooth movement of valves in the valve body. Impaired movement can affect oil pressure control, leading to abnormal transmission operation.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.