Is it normal for the Wildlander's average fuel consumption to fluctuate constantly?

1 Answers
LilaMarie
07/25/25 3:35am
It is normal for the Wildlander's average fuel consumption to fluctuate constantly. Actual fuel consumption: The 2020 2.0L front-wheel-drive version has a MIIT comprehensive cycle fuel consumption of 5.7-5.9 liters/100 km, while the 2020 2.0L all-wheel-drive version has a MIIT comprehensive cycle fuel consumption of 6.3-6.4 liters/100 km. Reasons for low fuel consumption: The vehicle is equipped with Toyota's new 2.0L Dynamic Force engine, featuring a bore-to-stroke ratio of 1:1.2 and a compression ratio of 13:1. Combined with D-4S dual injection technology, the engine achieves a thermal efficiency of 40%. The Direct Shift CVT transmission is also noteworthy, capable of simulating 10-speed shifting. Gears 1-2 use gear transmission to address the traditional CVT's lack of low-speed torque, while gears 3-10 use belt transmission, ensuring smoothness while reducing fuel consumption.
Was this review help?
13
2
Share
More Forum Discussions

What causes the yellow exclamation mark light to illuminate in an Audi?

Audi vehicles displaying a yellow exclamation mark light can indicate three possible scenarios: 1. A yellow triangle with an exclamation mark in the center: This is the traction control indicator, also known as the ground adhesion control system light. When illuminated, it alerts the driver to deactivate the traction control system. If the light remains constantly on, it signifies an issue with the traction control system. 2. A yellow bracket line with an exclamation mark in the center: This indicator represents the tire pressure monitoring system. Its illumination indicates insufficient tire pressure. 3. A yellow gear with an exclamation mark: This is the automatic transmission fault warning light, signaling either a transmission malfunction, transmission fluid level below normal range, or the need for fluid replacement.
16
4
Share

Why is the air conditioning in a Ford car not cooling?

Ford car air conditioning not cooling reasons are as follows: 1. The air conditioning compressor belt is too loose: If you turn on the air conditioning in the car and hear a squeaking sound, then you should pay attention that the air conditioning not cooling is likely caused by the compressor belt being too loose. In this case, the air conditioning compressor belt needs to be tightened. Additionally, this belt is made of rubber and has a certain service life. If it is aged and no longer usable, it needs to be replaced. 2. Insufficient refrigerant: The common refrigerant code is R134A. The consequence of insufficient refrigerant is that it affects the cooling effect of the air conditioning, leading to inadequate cooling. Generally, the refrigerant is in a relatively closed environment, but after prolonged use of the vehicle, the components in the air conditioning system may age and wear out, causing leaks in the refrigerant space and resulting in insufficient refrigerant. 3. The air conditioning filter is too dirty: If the filter is too dirty, it not only causes more impurities to be sucked into the car, which is harmful to health, but the dirt can also block the air conditioning filter, thereby blocking part of the cold air from the air conditioning, making it feel like the air conditioning is not cooling. 4. The condenser is too dirty: If the condenser is not cleaned properly and is tightly wrapped by various impurities, the condenser will not be able to dissipate heat normally.
6
2
Share

What is the L gear in a car?

L gear stands for Low gear. The L gear is typically found in automatic transmission vehicles and is equivalent to first or second gear in a manual transmission car. When in L gear, the transmission remains in a low gear without shifting up, and it is generally used when climbing or descending steep slopes. Using L gear during downhill driving allows the engine to assist in braking, preventing the driver from having to press the brakes continuously, which could overheat the brake pads and lead to potential hazards. Below is a detailed introduction to car gears: 1. P gear, or Park gear, is used for parking. When the vehicle is stopped, it must be shifted into P gear before turning off the engine, removing the key, or locking the doors. Once shifted into P gear, the vehicle's braking mechanism is locked, ensuring the car remains stationary even on an incline. 2. R gear, or Reverse gear, is the most common gear for backing up. Before shifting into R gear, ensure the vehicle has come to a complete stop. Shifting into R gear while the car is still moving may damage the transmission. Many manufacturers include a safety button or position to prevent accidental shifting. 3. N gear, or Neutral gear, is equivalent to being in neutral and can be used when starting the engine or when towing the vehicle. 4. D gear, or Drive gear, is used for normal driving. When the gear selector is placed in D, the car automatically shifts between gears 1 to 3, 4, or 5. D gear is the most frequently used gear.
3
1
Share

What should be paid attention to when registering for a driving school?

Points to note when registering for a driving school: 1. Choose a reputable school to ensure education quality. 2. Before registration, undergo a medical examination at a designated hospital; only those who pass can register and take the exam. 3. Confirm the practice location before registration. Since training sites are usually far, try to choose a closer one for convenience. 4. Ask previous students about the reliability of the driving school. Communicate with licensed students to understand the learning conditions. 5. Fees. Clarify what costs are included and excluded in the school's quote before registration, and be wary of hidden charges (additional fees under other names during training). 6. Pass rate. A high pass rate indicates a greater chance of passing the exam and reflects the high level of the driving school's instructors.
7
2
Share

What are the reasons why a sedan cannot start?

The reasons why a sedan cannot start are as follows: 1. Battery depletion: If the car battery is dead, the car will not start. There are many reasons for battery depletion, such as battery water issues, battery failure, or prolonged parking, all of which can lead to a depleted car battery. 2. Ignition system failure: The function of the ignition system is to provide high voltage to the spark plug to ensure the car runs. If the car does not start and the battery is not the issue, it is likely that the ignition system has failed. Poor connections or high-voltage leakage can cause faults, affecting the car and making it difficult to start. 3. Low temperature: Most winters are quite cold, and it is common for cars not to start. In such environments, the viscosity and rotation speed of the car's engine oil decrease, and the battery's ignition energy also drops. As a result, flammable gases cannot form, making it hard to start the car. 4. Engine carbon buildup: Carbon buildup can make it difficult to start the vehicle. There are many reasons for engine carbon buildup, such as water in gasoline, poor fuel quality, or poor valve sealing. 5. Starter motor aging: If the car is hard to start, it may be due to an aging starter motor. If the starter motor has been used for too long, it can age, leading to weak starting or failure to start. Therefore, it is important to replace the starter motor regularly and avoid using it for too long.
12
3
Share

What is the Function of Engine Start-Stop?

Engine start-stop function: By equipping a traditional engine with an enhanced motor featuring idle start-stop capability, the engine completely shuts off when the vehicle meets idle stop conditions. When the vehicle needs to move forward again, the idle start-stop motor system quickly responds to the driver's start command, rapidly restarting the engine with seamless transition, thereby significantly reducing fuel consumption and exhaust emissions. Below is more information about engine start-stop technology: 1. Engine start-stop technology automatically shuts off the engine when the vehicle comes to a temporary stop during driving; when it's time to proceed, the system automatically restarts the engine. 2. Working principle: When the vehicle stops due to traffic congestion or at an intersection, the driver presses the brake pedal and shifts to neutral. At this point, the Start/Stop system automatically checks that the engine is idling without being in gear, the wheel speed sensors of the anti-lock system show zero, and the electronic battery sensor indicates sufficient energy for the next start. Once these three conditions are met, the engine automatically stops rotating.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.