Is it normal for the Volkswagen Polo to display a wrench when starting?

What does 45ah mean for a car battery?

Battery 45ah refers to the battery capacity of 45 ampere-hours, where 'a' represents current and 'h' represents hours. In simple terms, if the battery supplies a current of 45 amperes, it can only provide power for one hour. A car battery is a type of battery, also known as a storage battery, which works by converting chemical energy into electrical energy. The battery commonly referred to by car owners is a lead-acid battery, which mainly uses lead and its oxides as electrodes and sulfuric acid solution as the electrolyte. It is important to avoid storing the battery in a discharged state. When the battery is discharged, sulfation is likely to occur, where lead sulfate crystals adhere to the plates, blocking the ion channels and causing insufficient charging and reduced battery capacity. The longer the battery remains idle in a discharged state, the more severe the damage. When the battery is not in use, it should be charged once a month to extend its service life.

16

0

Share

What are the benefits of Toyota's snake gear?

The snake-shaped gear shift path is relatively curved, which can be consistent with the movement of the gears inside the transmission. This means that there is no need for too many complex mechanical structures between the gear lever and the transmission friction. The operation of the snake-shaped gear is relatively complex, especially in the case of blind operation, making it less prone to shifting errors. Due to the winding path of gear switching resembling a snake, it is called "snake gear." More gear introductions are as follows: 1. P Gear: Also known as the parking gear, it is the gear used when the vehicle is parked for a long time. It locks the rotating part of the car using the mechanical device inside the transmission, preventing the car from moving. The correct operation method is to first pull up the handbrake and then shift into P gear. 2. R Gear: Also called the reverse gear, it is the gear used when the vehicle needs to reverse. When the gear lever is in R gear, the hydraulic system's reverse oil circuit is connected, causing the drive wheels to reverse, enabling reverse driving. During operation, you need to press the brake and press the shift lock on the gear lever before moving the gear lever to R gear. 3. N Gear: This is the neutral gear, which is easy to understand. It is the gear used when the vehicle is parked for a short time without turning off the engine, such as when waiting at a red light or in traffic. After shifting into this gear, the engine's power will not be transmitted to the wheels, and stepping on the accelerator will not make the vehicle move. 4. S Gear: Represents the sport mode, making the vehicle more sporty to drive. When the gear lever is shifted into S gear, the throttle response speed becomes faster, the engine speed is maintained in a higher range, and the shift timing is delayed, keeping the vehicle in a high-power output state. 5. M Gear: This is the manual mode of the automatic transmission or the simulated manual mode of the CVT transmission.

20

5

Share

What is the working principle of the original 4-wire central control motor?

The original 4-wire central control motor operates based on the principle of electromagnetic induction. A current-carrying conductor moves under the force exerted in a magnetic field. The energized coil rotates under the force in the magnetic field, driving the starter rotor to rotate, and the small gear on the rotor drives the engine flywheel to rotate. The starting system converts the electrical energy stored in the battery into mechanical energy. To achieve this conversion, a starter must be used. The function of the starter is to generate power through a DC motor, which drives the engine crankshaft to rotate via the transmission mechanism, thereby starting the engine. The starting system includes the following components: battery, ignition switch (starter switch), starter assembly, starter relay, etc. Although the starters used in different types of vehicles vary in form, their DC motor parts are basically similar, with the main differences lying in the transmission mechanism and control device. The function of the DC series-wound motor is to convert the electrical energy input from the battery into mechanical energy, generating electromagnetic torque. The transmission mechanism, also known as the starter clutch or engagement device, functions to engage the small gear on the starter shaft with the flywheel ring gear during engine starting, transmitting the starter's torque to the engine crankshaft. After the engine starts, it automatically disengages the starter small gear from the flywheel ring gear.

15

0

Share

Will the engine shake if the oxygen sensor is broken?

The engine will shake if the oxygen sensor is broken. The function of the rear oxygen sensor in a car is to measure whether there is excess oxygen in the exhaust after engine combustion, converting the oxygen content into a voltage signal and transmitting it to the engine computer. This allows the engine to achieve closed-loop control targeting the excess air factor, ensuring that the three-way catalytic converter maximizes the conversion efficiency of hydrocarbons, carbon monoxide, and nitrogen oxides in the exhaust, thereby optimizing the conversion and purification of emission pollutants. If the oxygen sensor malfunctions, it can lead to unstable idling and excessive fuel consumption. A damaged oxygen sensor significantly reduces engine power, causes sluggish acceleration, and results in black smoke from the exhaust pipe. Generally, when the oxygen sensor fails, the engine warning light will illuminate, the engine will idle unevenly, the exhaust will produce a sputtering sound, emit a pungent odor, and fuel consumption will increase. You can use a diagnostic tool to check the voltage, which typically fluctuates between 0.1-1 volts, changing more than 8 times in 10 seconds. If the voltage fluctuates between 0.1-0.5 volts, it indicates a lean air-fuel mixture. If it fluctuates between 0.5-1 volts, it indicates a rich air-fuel mixture. If the voltage remains static between 0.4-0.5 volts, it means the oxygen sensor is damaged.

2

Share

How to fold the mirrors of an Audi A3?

Audi A3 mirrors have a folding function. You can adjust the mirror knob on the front left door by turning it to the 7 o'clock direction. The electric folding mirrors on the Audi Q3 refer to the side mirrors on both sides of the car that can be folded and retracted when necessary. Here is some relevant information about the mirrors: 1. Nowadays, mid-range and high-end cars mostly come with foldable mirrors. The folding function is divided into two types: manual and electric. The manual type requires the driver to reach out the window or get out of the car to fold the mirrors, which is inconvenient and unsafe. This type of folding mirror is now rare. The electric type is more common, and its advantage is that the driver can fold the mirrors from inside the car, and the mirrors will automatically unfold when the vehicle is started. 2. The folding mirror function of the Audi Q3 is particularly useful when parking on city streets. Folding the mirrors can save a lot of space and also avoid the pain of having your car's 'ears' broken. Accidents are inevitable while driving, and the mirrors, being the widest part installed on the vehicle, are most susceptible to impact in case of a side scrape. To minimize scratches, the mirrors need to have a folding function. Mirrors with a folding function can be retracted when passing through narrow sections, improving the vehicle's passability. When the driver leaves the car, the mirrors can also be folded, not only protecting the mirror surface but also reducing parking space, effectively avoiding scratches.

7

2

Share

What is the process for inspecting a used car?

In the process of used car transactions, the condition of the vehicle is the most significant factor affecting its price. For example, if a car has a bent radiator frame, the buyer might claim it's an accident vehicle to drastically lower the price, while the seller might argue that the damage doesn't affect the frame, considering it only a minor collision, and thus refuse to lower the price. Those knowledgeable about cars can argue their case effectively, while those who aren't might end up at a disadvantage. Therefore, whether buying or selling, having a comprehensive understanding of the vehicle's condition is essential. Before delving into vehicle condition assessment, it's important to grasp some basic knowledge. The three major components of a car's frame are fundamental in the inspection process. These components are: the structural parts, reinforcement parts, and body panels, listed in order of decreasing importance. The structural parts refer to the car's frame, which can be likened to the skeleton supporting the vehicle's body, serving as the primary safety guarantee. Since structural parts are integrated, any damage necessitates cutting and welding during repairs, significantly compromising safety. Hence, any accident damaging the structural parts is classified as a major accident. Given their critical role in driving safety, structural parts have the most significant impact on vehicle condition assessment and depreciation. Any issues in this area are considered serious safety hazards. First, place the vehicle on level ground and stand 3 to 5 meters directly in front of it to observe if the shoulders are level. Uneven shoulders indicate that the body frame has been repaired or that the suspension and shock absorbers haven't been properly fixed. Next, check if the gaps between the engine hood and the front fenders are consistent. Inspect the headlights for uniformity in age, even gaps, and symmetry. Then, open the engine hood to check for the presence of original sealing strips and any deformation on the inner surface of the hood. After inspecting the hood, stand at a 45-degree angle to the front of the car to examine the smoothness and evenness of the body's side. Proceed to check the uniformity and symmetry of the door gaps. Examine the window sealing strips for neatness and look for manufacturer logos on the windows, ensuring all logos belong to the same brand. Open the doors to inspect the door frames for deformation, verify if the welding points are original factory seals, and check the skirts for collision marks. Then, inspect the A-pillars, B-pillars, and C-pillars for any deformation, collision marks, or repainting. Finally, check the tire treads for signs of aging or wear.

11

2

Share

Is it normal for the Volkswagen Polo to display a wrench when starting?

What does 45ah mean for a car battery?

What are the benefits of Toyota's snake gear?

What is the working principle of the original 4-wire central control motor?

Will the engine shake if the oxygen sensor is broken?

How to fold the mirrors of an Audi A3?

What is the process for inspecting a used car?

What does FM mean in a car?

What Causes the Rattling Noise from the Sunroof on Bumpy Roads?

What is the SOS system in a car?

What are the reasons for Volkswagen engines consuming engine oil?