···
Log in / Register

Is It Normal for the Steering Wheel to Make a Noise When Turning Right?

4 Answers
PeytonLynn
07/29/25 11:27pm
It is not normal for the steering wheel to make a noise when turning right, and it requires timely inspection and repair. Below is a detailed introduction to automotive repair: Overview: Automotive repair is a general term for the maintenance and repair of vehicles. It involves using technical means to diagnose faults in a malfunctioning car, identify the cause of the issue, and take measures to eliminate the fault, restoring the vehicle to a certain level of performance and safety standards. Other Information: Automotive repair includes major repairs and minor repairs. Major repairs refer to restorative repairs that involve repairing or replacing any components of the car (including fundamental parts) to restore the vehicle's technical condition and fully (or nearly fully) recover its lifespan. Minor repairs refer to operational repairs that involve replacing or repairing individual parts to ensure or restore the vehicle's working capability.
Was this review help?
20
4
Share
StJoanna
08/16/25 2:10am
I've been driving for fifteen years, and any abnormal noise when turning the steering wheel to the right is definitely not normal—it's a clear warning sign. The most common causes could be wear in the steering tie rod ball joint or internal components of the steering gear. When parts loosen, friction during turning creates noise. If not addressed promptly, it can gradually increase steering resistance, affecting precision and even leading to hazards. I remember once my car made a creaking sound, and after inspection, it turned out to be worn lower control arm bushings, which cost just over 200 yuan to fix. Don’t ignore this—schedule a thorough inspection of the chassis and steering system at a repair shop. The cost is minimal, but safety is priceless. Paying attention to sound changes while driving can help gauge urgency. Additionally, long-term driving on bumpy roads makes these issues more likely, so regular suspension checks are crucial.
Was this review help?
2
0
Share
Expand All
McElena
10/19/25 2:08am
As a car enthusiast, I believe steering wheel noise in any direction is abnormal, especially when turning right with clicking or squeaking sounds, which may stem from power steering pump wear or transmission chain issues. Once you hear this, don't hesitate—first stop the car and gently turn the steering wheel to test angles. If the noise occurs only at specific angles, it might indicate abnormal component positioning. Last time I encountered a similar situation, after a check-up at the 4S store, replacing the fluid solved the problem. It's best to address this promptly as it involves steering safety—delaying could cost more. Also, it's advisable to check tire wear and wheel hub condition, as they might indirectly cause noise. In short, stay vigilant while driving, and don't let minor issues escalate into major problems.
Was this review help?
3
2
Share
Expand All
StellaFitz
12/02/25 2:44am
Steering wheel noise is a serious issue; the steering system should not have any abnormal sounds. A noise when turning right may indicate loose tie rods or ball joints. If left unrepaired, the steering could seize up and cause an accident. I've handled multiple cases like this—early repairs can save a lot of trouble.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

Can Strobe Brake Lights Pass the Annual Vehicle Inspection?

Strobe brake lights cannot pass the annual vehicle inspection. Modifying car tail lights to strobe is illegal: Strobe lights are restricted lights, only authorized for police vehicles or special-purpose vehicles, and are not permitted for civilian use. According to Article 16, Paragraph 1 of the 'Road Traffic Safety Law of the People's Republic of China': No unit or individual may assemble a motor vehicle or alter its registered structure, construction, or characteristics without authorization. Regulations on vehicle modifications: To modify a motor vehicle, changes must be made within the scope permitted by traffic authorities. This includes modifications to body color, engine, fuel type, or chassis number. After submitting an application, the driver must obtain approval from the traffic authorities before proceeding with any modifications. No unit or individual may assemble a motor vehicle or alter its registered structure, construction, or characteristics without authorization.
14
0
Share

What are the requirements for tires in vehicle annual inspection?

Vehicle annual inspection has the following requirements for tires: no excessive wear, tire tread patterns must be consistent, four-wheel tread patterns should match or at least the front two and rear two should match, but left and right inconsistency is not allowed. Annual inspection refers to the annual or biennial safety inspection of vehicles, which includes comprehensive checks on components such as horns, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, and license plate installation. Several factors that may affect the annual inspection include: 1. Modification of vehicle appearance or external dimensions; 2. Non-standard license plates; 3. Improper use of lighting; 4. Unauthorized painting or modification of the vehicle body; 5. Unauthorized alteration of vehicle logos.
12
1
Share

Will the driver's license be checked during a drunk driving inspection?

During a drunk driving inspection, the driver's license will definitely be checked. Traffic police first verify two documents during a drunk driving inspection, namely the vehicle registration certificate and the driver's license. Dangers of drunk driving: Alcohol stimulation during drinking can make people excited, leading to excessive consumption without realizing it. When the alcohol concentration in a person's blood reaches a certain level, their ability to react to and control external situations decreases, along with their capacity to handle emergencies. For drunk drivers, the higher the blood alcohol content, the greater the likelihood of a collision. Penalties for drunk driving: Driving under the influence of alcohol results in a six-month suspension of the motor vehicle driver's license and a fine. If penalized for drunk driving once and caught again, the offender will face up to ten days of detention, additional fines, and revocation of the motor vehicle driver's license.
8
2
Share

What is the fuel consumption of the Benelli TNT 600?

Benelli TNT 600 fuel consumption: Official 5.5L/100KM, actual fuel consumption ranges between 3.7-4.6. Fuel consumption calculation formula: Fuel consumption per 100 kilometers = Fuel consumption (liters) ÷ Distance traveled (kilometers) × 100. For example, if a 1.6L car travels 400 kilometers and consumes 30 liters of fuel, the fuel consumption per 100 kilometers = 30 ÷ 400 × 100 = 7.5 liters. Tips to reduce fuel consumption: Ensure correct tire pressure. Pressure should not be too high or too low, as both can increase fuel consumption. Regularly check tire pressure to avoid affecting driving fuel consumption. Avoid changing tire size unnecessarily. Wider tires increase resistance. Unless special requirements for good grip are needed, excessively wide tires will only increase fuel consumption.
12
2
Share

At what engine speed does it start?

Engine speed is normally between 500 and 850 revolutions per minute. The steps to start a car engine are: 1. Turn the ignition key to the ON position and wait for 5 to 8 seconds when starting; 2. Turn the key to the start position; 3. Immediately release the ignition key after the engine starts successfully, and it will automatically return to the ON position. Precautions for starting a car engine are: 1. Do not start the engine immediately after inserting the key when getting in the car; 2. Do not press the brake first when starting a vehicle with one-button start; 3. When the key fob of a one-button start vehicle is out of battery, bring the key close to the start button; 4. Do not use excessive force when the inserted key cannot be turned; instead, turn the key while simultaneously turning the steering wheel back.
14
1
Share

What is the basic function of a clutch?

The functions of a clutch include: 1. Facilitating gear shifting and preventing overload in the transmission system; 2. Ensuring the transfer or interruption of engine power output between the engine crankshaft and the transmission device according to the driving needs of the vehicle; 3. Assisting the vehicle in starting smoothly. The clutch is located inside the flywheel housing between the engine and the gearbox, and the clutch assembly is fixed to the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the gearbox. During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and the gearbox, thereby cutting off or transmitting the power input from the engine to the gearbox.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.