···
Log in / Register

Is it normal for the Haval M6 dashboard to display 'bar'?

1 Answers
Roy
07/29/25 11:27am

No, it is not normal. On the Great Wall Haval H6 series vehicles, the 'bar' displayed on the dashboard indicates low tire pressure. The normal tire pressure for a car should be between 2.3 and 2.5 bar. Below are specific details about car tire pressure: Tire pressure is affected by seasonal factors: In summer, tire pressure should be slightly lower because high temperatures can cause the tires to heat up, and high pressure may lead to tire blowouts. In winter, tire pressure should be slightly higher due to thermal contraction. Hazards and effects of improper tire pressure on driving: 1. Reduced tire friction and adhesion, affecting braking performance. 2. Causes steering wheel vibration and deviation, reducing driving comfort. 3. Accelerates uneven wear of the central tread pattern, shortening tire lifespan. 4. Increases vehicle vibration, indirectly affecting the lifespan of other components.

Was this review help?
4
4
Share
More Forum Discussions

can you drive a car if the exhaust falls off

No, you should not drive a car if the exhaust system has fallen off or is severely damaged. It is unsafe, likely illegal, and can lead to further expensive damage to your vehicle. The immediate risks are significant: poisonous carbon monoxide gas can enter the passenger cabin, and the hot exhaust components can pose a serious fire hazard, especially if dragging on the ground. The exhaust system is not just for reducing noise; it's a critical component for vehicle safety and performance. Its main parts include the manifold , catalytic converter , and muffler . When compromised, the system cannot properly channel toxic engine fumes away from the vehicle. A detached exhaust also means the engine's on-board diagnostics (OBD) system will detect a problem, likely triggering the check engine light due to faulty readings from the oxygen sensors . Beyond safety, driving with a broken exhaust is illegal in all states. You will fail a mandatory vehicle inspection, and you can be pulled over and ticketed for excessive noise or an unsafe vehicle. From a cost perspective, a simple repair like re-hanging a muffler is affordable, but driving on it can damage other components like the catalytic converter, which is one of the most expensive parts to replace. Potential Consequence Description Typical Cost Range (USD) Carbon Monoxide Poisoning Odorless, colorless gas entering cabin; causes drowsiness, headache, and can be fatal. N/A (Health Risk) Fire Hazard Hot exhaust pipes contacting flammable materials (dry grass, fuel leaks). N/A (Safety Risk) Catalytic Converter Damage Driving with an unfiltered system can destroy this emissions-control device. $1,000 - $2,500 Failed Vehicle Inspection Will not pass state emissions/safety tests, making registration renewal impossible. Fine + Repair Costs Noise Violation Ticket Police can issue a citation for excessive noise disturbance. $50 - $500+ Oxygen Sensor Damage Exposed sensors can be damaged by impact or contaminants. $200 - $500 The only safe action is to have the car towed to a repair shop. If you must move the vehicle a very short distance (e.g., from a street into a driveway), do so with all windows fully open to ventilate the cabin, but this is still not recommended. A professional mechanic can properly assess the damage, which could range from a broken hanger (a quick, inexpensive fix) to a full exhaust pipe replacement.
3
0
Share

can you drive a car with a bad wheel bearing

No, you should not drive a car with a bad wheel bearing. It is a significant safety hazard. While you might be able to limp the car home at very low speeds for a short distance in an emergency, continuing to drive risks a catastrophic failure where the wheel could seize up or completely separate from the vehicle. The primary danger is the potential for a complete loss of vehicle control, especially at highway speeds. The problem will not fix itself and will only get worse, leading to more extensive and expensive damage to other components like the wheel hub, CV joint, or steering knuckle. A wheel bearing is a set of steel balls or tapers held together by a metal ring, called a race, that allows your wheel to spin smoothly with minimal friction. When it fails, you'll typically hear a growling or rumbling noise that gets louder as you accelerate or turn. The most telling sign is that the noise changes in volume when you steer left or right; turning one way will unload the bad bearing, making the noise quieter, while turning the other way loads it, making the noise louder. You might also feel a vibration in the steering wheel or a noticeable looseness or "shimmy" in the wheel. Ignoring these warnings is a gamble. The bearing will generate intense heat from increased friction, which can weld the components together, causing the wheel to lock up suddenly. This can be disastrous. The cost of replacing a single wheel bearing is far less than the potential cost of an accident or replacing an entire hub assembly and suspension parts. Scenario Risk Level Potential Consequence Recommended Action Short, low-speed drive (<5 miles, <30 mph) High Wheel seizure, increased damage Only in absolute emergency; avoid turns. Normal city/highway driving Severe Complete wheel detachment, loss of control, accident Do not drive. Tow the vehicle. Ignoring early warning signs (noise) Moderate to High Accelerated wear, damage to hub, ABS sensor failure Schedule repair within a week; avoid long trips. Immediate repair after noise starts Low Isolated bearing replacement Prevents further damage and ensures safety.
14
1
Share

can you drive a car with a broken wherl stud

No, you should not drive a car with a broken wheel stud. It is a significant safety risk. A wheel stud is a threaded bolt that, along with the lug nut, secures the wheel to the vehicle's hub. Each stud is critical for maintaining the wheel's proper alignment and handling the immense forces of driving, including braking and cornering. A single broken stud increases the load on the remaining ones, which can lead to a cascade failure. The wheel can become loose, cause vibrations, damage other studs, and in a worst-case scenario, detach entirely while the vehicle is in motion. The severity of the risk depends on your vehicle. Most passenger cars have four, five, or six lug nuts per wheel. Losing one stud on a five-lug wheel means you're down to 80% of the designed clamping force. While this might seem manageable for a very short, slow drive to a nearby shop, it's a gamble. The remaining studs are now under disproportionate stress, especially during sudden stops or if you hit a pothole. The vibration from an imbalanced wheel can quickly loosen the other lug nuts, escalating the danger. Here is a comparison of risk levels based on the number of studs: Total Number of Wheel Studs Number of Broken Studs Remaining Studs Approximate Clamping Force Loss Recommended Action 4 1 3 25% Do not drive. High risk of immediate failure. 5 1 4 20% Extreme caution. Short, slow drive to a very close repair shop only. Avoid bumps and hard braking. 6 1 5 ~17% Proceed with caution. Drive directly to a repair facility at low speeds. 5 2 3 40% Do not drive under any circumstances. The wheel is not securely fastened. The safest course of action is to have the car towed to a repair shop. Replacing a wheel stud is a relatively inexpensive and quick repair for a professional. The cost of a tow is negligible compared to the potential cost of an accident caused by a wheel separation.
19
2
Share

can you drive a car with a faulty alternator

Yes, but only for a very short distance and as an absolute last resort to get the car to a repair shop. The alternator is responsible for charging the battery and powering the car's electrical systems while the engine is running. Once the battery's stored power is depleted, the car will shut down completely. How Far Can You Drive? The distance depends entirely on your battery's health and charge level when the alternator fails. A healthy, fully charged battery might power the car for 15-20 miles in ideal conditions (no headlights, air conditioning, or radio). However, this drains the battery rapidly and can leave you stranded. The primary risk isn't just the engine stopping; it's that a drained battery cannot power essential systems like power steering and brakes, making the car difficult to control. Immediate Steps to Take If you suspect alternator failure (indicated by a battery/ALT warning light on the dashboard, dimming headlights, or strange electrical behavior), your goal is to reach safety immediately. Turn off all non-essential electronics: This includes the A/C, radio, heated seats, and blower fan. Use headlights only if legally required for safety. Avoid stopping and starting: Each engine start consumes a massive amount of battery power. Do not turn the car off until you are at your destination. Head directly to a repair facility: Do not run errands. Drive the shortest route to a mechanic or your home. The following table illustrates how quickly a typical car battery can be depleted by various electrical components, showing why your range is so limited. Electrical Component Approximate Power Draw (Watts) Impact on Battery Life Engine Control Unit (ECU) / Fuel Pump 150-200W Essential; cannot be turned off Headlights (Low Beam) 110W High drain; avoid if safe to do so Air Conditioning Compressor 750-1500W Extreme drain; turn off immediately Blower Fan (on high) 200-400W High drain; turn off Radio / Infotainment System 50-100W Moderate drain; turn off Heated Seats 100-200W (per seat) High drain; turn off Driving with a faulty alternator is a gamble. The safest action is to call for a tow truck to avoid causing further damage to the electrical system or a hazardous situation on the road.
11
4
Share

can you drive a car with a bad fuel injector

Driving with a bad fuel injector is possible for a short distance to get to a repair shop, but it's a risky practice that can cause significant and costly damage to your engine. The primary risk is that a malfunctioning injector can lead to a lean condition (too much air, not enough fuel) or a rich condition (too much fuel, not enough air) in the affected cylinder. Both scenarios are detrimental to engine health. A lean condition can cause the engine to misfire —a noticeable shaking or stumbling sensation—and lead to overheating, which can damage the piston and valves. A rich condition, often characterized by black smoke from the exhaust and a strong gasoline smell, can wash away the protective oil film from the cylinder wall, accelerating piston ring and cylinder wear. It also contaminates the engine oil and can destroy the catalytic converter , one of the most expensive components to replace. The severity of the damage depends on how the injector has failed. Here’s a breakdown of common symptoms and associated risks: Symptom What It Means Potential Risk if Driven Extensively Engine Misfire Injector is clogged or not spraying fuel properly. Damage to catalytic converter; piston/valve damage from overheating. Rough Idle Uneven fuel delivery to the cylinders. Increased engine wear; strain on engine mounts. Poor Fuel Economy Injector is stuck open, leaking fuel. Washed cylinder walls; oil contamination; catalytic converter failure. Strong Gasoline Smell Fuel leak from a damaged injector seal or body. Fire hazard; environmental pollution. Check Engine Light Engine control unit (ECU) detects a fuel trim or misfire issue. Underlying damage is already occurring; further driving compounds it. If you suspect a bad injector, the safest course of action is to have the car towed to a mechanic. If you must drive it, keep the trip very short, avoid hard acceleration, and go directly to the repair facility. The cost of a tow is minimal compared to the expense of a new engine or catalytic converter.
13
2
Share

can you drive a car right when you insure it

Yes, in most cases, you can drive a car immediately after you've successfully purchased and bound an insurance policy. The critical factor is that the coverage must be active before you put the car in drive. This typically happens instantly or within minutes when you buy a policy online or over the phone with a provider. However, you must already have a valid driver's license and the vehicle must be properly registered. The real risk is assuming you're covered during a grace period or while waiting for documents; if the policy isn't officially bound, you are driving illegally and without financial protection. The process of making a policy active is called "binding" coverage. Once you provide your payment information and receive a confirmation number, email, or digital proof of insurance card, your policy is generally in effect. Most major insurers provide this instant activation. It's not the physical card that grants permission, but the electronic record in the insurer's system that law enforcement can verify. However, there are crucial prerequisites and exceptions. You cannot insure a car you don't legally own or have an insurable interest in. If you're buying a new car, dealers often require proof of insurance before you can drive it off the lot. For a used car private sale, you should arrange insurance before the purchase is finalized. Scenario Typical Insurance Activation Time Key Consideration New Online Policy Purchase Instant to 15 minutes Have your VIN and driver's license ready. Adding a Car to Existing Policy Instant Confirm with your agent before driving. New Policy via Agent/Phone Within a few hours Get a verbal confirmation and reference number. Lapse in Coverage May require a down payment first Rates might be higher; avoid a coverage gap. The safest practice is to never assume. Contact your insurance agent directly or wait for the official confirmation before driving. Driving uninsured can lead to severe fines, license suspension, and personal financial liability in an accident.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.