Is it normal for the Delong X3000's water temperature to reach 95°C when climbing hills?

2 Answers
LaStephanie
08/31/25 8:21am
The normal temperature is around 90°C. Generally, it should not be lower than 80°C or higher than 100°C. Below is relevant information: When a car engine operates normally, it requires a certain working temperature. Temperatures that are too high or too low are not conducive to the normal operation and performance of the engine. The heat generated by the engine is difficult to dissipate through conventional air cooling, so water-cooled heat conduction designs are widely used in car engines. The function of the cooling system is to allow the engine to operate within the most favorable temperature range, improving engine power while reducing engine wear and fuel consumption. Temperatures that are too high or too low can adversely affect engine performance. The engine coolant temperature should not be too low or too high; it must remain within a certain range. The normal temperature is indicated by the central position of the gauge, which is 90°C. This is why the antifreeze temperature rises quickly after the vehicle starts, and once the pointer reaches the central position, the heat exchange balance prevents the antifreeze temperature from rising further. Typically, starting the engine when the temperature reaches the middle position is ideal. This is one of the reasons why vehicles need to warm up before driving.
Was this review help?
3
5
Share
AubreyMarie
09/13/25 4:33am
I've been driving for many years, often operating trucks like the Delong X3000, and it's quite common for the water temperature to rise to 95 degrees when climbing hills. Under heavy loads, the engine requires more power, naturally generating more heat, so a slight increase in water temperature is normal. Under normal circumstances, a water temperature range of 80 to 100 degrees is safe, and 95 degrees is still in the middle range, not considered high. From my own experience, if the temperature gauge doesn't rapidly rise into the red zone, there's no major issue. I recommend keeping an eye on whether the water temperature quickly drops back to around 90 degrees after climbing. If the temperature remains consistently high or is high even on flat roads, there might be an issue with the cooling system, such as insufficient coolant or a faulty fan. Regular maintenance checks can prevent bigger problems, like checking the coolant level and radiator cleanliness every six months.
Was this review help?
1
0
Share
Expand All
More Forum Discussions

What is the fuel tank capacity of Jianghuai Geerfa?

The fuel tank capacity of the Jianghuai Geerfa K5w model is 600 liters. This vehicle features the newly launched K5 series wide-body high-roof cab, which has been optimized compared to the previous K3 series models, with a completely redesigned front fascia that appears more aggressive. Another notable feature of this vehicle is its rare adoption of the MAN technology engine, delivering a power output of 280 horsepower, which is more than sufficient for general express and light-load transportation users. More details are as follows: 1. Exterior: It's evident that Jianghuai has put significant effort into design in recent years. The new front fascia ensures a high rate of attention on the road. The L-shaped daytime running lights and headlights with lenses are also highly practical configurations. Notably, to meet the demand for large cargo capacity in express transportation, this vehicle is equipped with a large cargo box measuring 9.6 meters in length and 65 cubic meters in volume, satisfying most users' needs for capacity. Additionally, the total weight of the three axles is limited to 25 tons, allowing for occasional heavy cargo transportation. 2. Powertrain: The powertrain is the most distinctive part of this vehicle, featuring the rare Sinotruk MC07 engine with MAN technology, a displacement of 6.87L, and an output power of 280 horsepower. Paired with the Fast 9-speed gearbox, it performs effortlessly whether on regular highways or mountainous roads.
15
0
Share

What Causes a Jinbei Vehicle to Frequently Stall?

Here are the reasons why a Jinbei vehicle frequently stalls: 1. Circuit failure: The vehicle stalls due to low-voltage power interruption while driving. In this case, you can mainly check the ignition and starter switches, as well as the fuse box. 2. Low-voltage circuit short circuit causing stalling: Stalling caused by a low-voltage circuit short circuit is intermittent. You can inspect the low-voltage circuits. This is typically a component failure, often involving the ignition coil, capacitor, or electronic ignition module. 3. Fuel system failure: This includes a damaged fuel pump, ruptured fuel line, clogged fuel inlet, or an empty fuel tank. However, in such cases, the vehicle can usually be restarted.
2
0
Share

What kind of engine oil should be used for CRV maintenance?

CRV maintenance uses fully synthetic engine oil because it has excellent lubrication effects and can extend the engine's service life. Below is an introduction to engine oil: 1. Engine oil: Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). It serves multiple functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. It is often referred to as the 'blood' of a car. 2. Key features: The engine is the heart of a car, containing many metal surfaces that move against each other at high speeds in harsh environments, with operating temperatures reaching 400°C to 600°C. Advanced technology can convert natural gas into crystal-clean fully synthetic base oil, which is then enhanced with proprietary power-cleaning technology to create lubricants with superior cleaning and protective performance.
19
0
Share

What are the reasons for the Jetta's 2nd and 4th gears not engaging properly?

Reasons for the Jetta's 2nd and 4th gears not engaging properly: 1. Insufficient or excessive gear oil, or gear oil not meeting specifications. 2. Wear and tear on the ball joint at the lower end of the shift fork lever. 3. Bending or deformation of the shift fork and shift fork shaft. Improper clearance between the shift fork and synchronizer, or excessively stiff locking spring. 4. Loose synchronizer, spiral groove wear on the inner conical surface of the synchronizer ring, wear on the sliding blocks, or excessively weak spring tension. Below is some information about the Jetta: 1. Overview: The Jetta is a car brand under FAW-Volkswagen Automotive Co., Ltd., a joint venture of the German Volkswagen Group in China. 2. Other: On February 26, 2019, the Jetta brand, the first sub-brand in Volkswagen's history, was officially unveiled at Volkswagen's headquarters in Wolfsburg, Germany. This new brand is planned to enter the Chinese market in March of this year, becoming the third brand under the long-term cooperation between Volkswagen and FAW-Volkswagen.
19
0
Share

Can the window switch button light be installed on the Jetta VS5?

The window switch buttons of the Jetta VS5 do not light up, but they can be modified. It features a brand-new exterior design that is both novel and visually appealing. The hexagonal front grille is adorned with numerous diamond-shaped chrome decorations. The new Jetta logo, derived from the initial 'J' of JETTA, is positioned at the center of the V-shaped contour on the front face. LED daytime running lights are designed on both sides of the front bumper. Below is some relevant information about the Jetta VS5: 1. Engine Performance: The Jetta VS5 is equipped with a 1.4-liter turbocharged engine, delivering a maximum horsepower of 150ps, a maximum power of 110kw, and a maximum torque of 250nm. 2. Design of the Jetta VS5: The Jetta VS5 is a compact SUV under the Jetta brand, with body dimensions of 4419mm in length, 1841mm in width, and 1616mm in height, and a wheelbase of 2630mm. As the first SUV model of the Jetta brand, its front face incorporates Volkswagen's X design elements, extending bidirectionally to the hood and lower grille. The side body lines follow Volkswagen's design language, running through the entire body.
17
5
Share

What is the reason for the red light flashing on the Honda Vezel at night?

The following are the possible reasons for the red light flashing on the Honda Vezel: 1. Reasons for the red light flashing: The red light is an indicator light for the vehicle's anti-theft system. It will light up red when the door is not properly closed or if there is an obstruction blocking the door. Simply reclose the door tightly or remove the obstruction to resolve the issue. 2. Dashboard indicator lights: Modern vehicle dashboards are equipped with various indicator or warning lights beneath the panel, such as the coolant level warning light, fuel level indicator, washer fluid level indicator, charging indicator, high/low beam indicator, transmission gear indicator, anti-lock braking system (ABS) indicator, traction control indicator, and airbag (SRS) warning light, among others.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.