Is it normal for the car to idle at 1500 RPM when starting in summer?

1 Answers
SanCorbin
07/30/25 7:24am
It is normal for the car to idle around 1500 RPM when starting in summer. During startup, the vehicle has a cold fast idle because the engine is cold, and the mixture cannot burn stably. The engine's operating conditions are just beginning, so it needs to increase the idle speed to prevent stalling. Unstable car idling can cause the following hazards: 1. High idle speed: If the car's idle speed is too high, check whether the intake manifold is loose or leaking. This will significantly increase fuel consumption and also lead to more engine carbon deposits. 2. Low idle speed: If the car's idle speed is too low, there is a safety risk of stalling while driving. 3. Fluctuating idle speed: If the car's idle speed fluctuates, it may be due to spark plugs or ignition coils not working properly, causing the engine pistons to malfunction and resulting in severe shaking.
Was this review help?
13
0
Share
More Forum Discussions

What are the procedures for registering an electric vehicle?

The procedures for registering an electric vehicle are: 1. The vehicle owner or their agent must obtain the Electric Bicycle Registration, Transfer, and Cancellation Application Form and fill in the required information; 2. The inspecting officer will conduct checks on the electric vehicle, including stamping the frame number and weighing it. If the inspection is passed, the inspecting officer will stamp and sign the frame number section on the Electric Bicycle Registration, Transfer, and Cancellation Application Form; 3. Prepare the stamped Electric Bicycle Registration, Transfer, and Cancellation Application Form, the original identity document of the owner, the original proof of origin of the electric bicycle, and the original certificate of conformity; 4. The registration personnel will input the registration information and prepare to print the acceptance receipt. Once the procedures are completed, the electric vehicle license plate can be collected.
15
0
Share

How to Adjust Rearview Mirrors?

Adjusting the rearview mirrors starts with the left mirror. The driver should use the horizon as a reference, adjusting the vertical angle so that the mirror shows half sky and half ground. Then, adjust the horizontal angle so that the body of the car occupies about a quarter of the mirror's surface. Note that the adjustment should be based on the driver's seating position, not by leaning closer to observe the mirror. The right rearview mirror is the farthest from the driver's position, so we should reduce the space occupied by the sky, leaving more space for the side of the car body. Therefore, the right mirror should show one-quarter sky and one-quarter car body. A common mistake many car owners make when adjusting the central rearview mirror is using it to observe rear passengers or tilting it upwards to avoid obstruction. The correct adjustment is to ensure that the mirror provides a clear view through the rear window, with the ground and sky each occupying half of the view.
12
1
Share

How to Revive a Dead Battery?

Methods to revive a dead battery: 1. Check if the battery is low on water. If it is, add distilled water, charge it at one-tenth of the rated charging current until fully charged, then discharge it at one-tenth of the rated capacity until fully discharged. Repeat this cycle three to four times to repair the battery. 2. Use a high-power charger with a high current to charge the battery. Stop charging when the battery gets hot and resume charging once the temperature drops. Continue this process for 2 to 3 days, repeating several times to activate the battery. 3. Connect the dead battery in parallel with a good battery and charge it using a charger. The operation involves finding a similar good battery based on your battery count, plugging in the charger for 20 minutes, and observing if the battery gets hot. If it does, unplug the charger and wait for 1 hour, then charge again for 20 minutes. Repeat this cycle three times, then fully charge the battery to restore normal function.
1
5
Share

How to make up for failed ETC deduction?

Methods to make up for failed ETC deduction: The owner of the motor vehicle should go to the urban road, bridge, and tunnel toll collection service station to make up the payment within 15 days from the date of default. Alternatively, they can make the payment at designated banks, municipal post office collection points, or through the local ETC WeChat public account or Alipay service window. If the ETC shows a deduction failure when exiting the highway, under the guidance of the staff, you can switch to a manual toll exit and pay in cash. After successful payment, the ETC will not deduct again, nor will it affect the next highway passage. There are many reasons for ETC deduction failure, such as overdue credit card payments, expired credit cards, insufficient frozen funds in the savings card, frozen bank accounts, or canceled deduction agreements.
16
2
Share

How to Turn on High Beam Headlights?

Method to turn on high beam headlights: 1. Locate the high beam switch on the left-hand control stalk or the light rotary knob on the left side of the steering wheel; 2. Turn on the low beam headlights, then push the control stalk downward (toward the engine direction). At this point, the dashboard will display an indicator, and the high beam headlights will be activated. High beam headlights focus their light parallel to the road, emitting a concentrated and bright beam that can illuminate distant and tall objects. Low beam headlights, on the other hand, emit light in a diverging pattern (between 1x and 2x the focal length), covering a wider area at a shorter distance. The main differences between high beam and low beam headlights are: high beams have a higher angle and longer range, while low beams have a lower angle and shorter range.
11
3
Share

Which is More Fuel-Efficient: 95 or 92 Octane Gasoline?

In actual driving conditions, the average fuel consumption difference between 95 and 92 octane gasoline is minimal. Under identical circumstances, using 95 octane may save approximately 0.001 liters per kilometer compared to 92 octane - an almost negligible amount. Moreover, 95 octane typically costs more than 92 octane, so opting for 95 octane to save fuel might actually lead to higher expenses. 92 octane gasoline is cheaper than 95 octane. For the same price, you get more liters of 92 octane than 95 octane, meaning you can generally travel farther with 92 octane. When comparing equal quantities of gasoline, the achievable distance also depends on the engine's compression ratio. High-compression engines perform better with higher-octane fuel that has superior anti-knock properties, enabling more efficient energy conversion. The difference between 92 and 95 octane gasoline: The octane rating (92 or 95) indicates the fuel's research octane number (RON), with 92 octane having at least 92 RON. The appropriate gasoline grade for an engine primarily depends on whether the compression ratio matches the fuel's octane rating. Additionally, 92, 95, and 98 octane unleaded gasoline contain 92%, 95%, and 98% isooctane respectively - a component with strong anti-knock properties.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.