Is It Normal for the Baojun 730 Engine to Leak Oil?

1 Answers
DeCecilia
07/29/25 6:38pm
It is necessary to check the extent of the engine oil leakage. If it is only a slight seepage, it is a normal phenomenon due to the natural permeation of engine oil. However, if the engine oil leakage is severe, it should be addressed at a repair shop as soon as possible. Causes of engine oil leakage: The reasons for engine oil leakage include damage to the engine cylinder gasket, oil pan gasket, or sealing rings; damage to the front and rear crankshaft oil seals or camshaft oil seals; or loose fastening screws. Baojun 730: The new Baojun 730 automatic transmission model is equipped with a 6-speed wet dual-clutch transmission. This automatic transmission can withstand a maximum torque of 360N·m and features BorgWarner's pre-engagement technology paired with dual-clutch adaptive control, enabling rapid gear shifts in just 0.2 seconds.
Was this review help?
9
2
Share
More Forum Discussions

How to Repair Cracks in Leather Seats?

To repair cracks on leather seats, acrylic resin is required. The steps are as follows: 1. Locate the cracked areas on the leather seats. 2. Apply acrylic resin onto a towel. 3. Wipe the entire seat with the towel. 4. Apply leather adhesive to the cracked areas and dry with a hairdryer. 5. Spray another layer of resin adhesive and dry with a hairdryer. Additional Tips for Leather Seat Maintenance: 1. Proper Cleaning: When cleaning car leather seats, use appropriate cleaners to remove dust and stains from the leather surface. This prevents bacteria and pollutants from damaging the leather and ensures the seats remain dry and tidy. 2. Avoid Soaking: Soaking car leather seats can cause significant damage to the leather. 3. Keep Away from Heat Sources: Placing very hot objects near leather seats can lead to cracking. Also, avoid exposing leather seats to direct sunlight to prevent fading. 4. Apply Leather Conditioner: Properly conditioning the leather helps replenish nutrients, repair minor damages, and keeps the surface smooth and soft, enhancing the feel.
17
4
Share

Why is the tire pressure monitor not displaying tire pressure?

There are mainly two reasons why a tire pressure monitor does not display the tire pressure, which are: 1. Insufficient battery power in the tire pressure sensor. Simply recharge the battery. 2. Failure to read the signal from the tire's internal monitor. Continue driving the vehicle for a while. Additional Information: Methods of tire pressure monitoring: 1. Direct tire pressure monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire's air pressure. The pressure information is transmitted from inside the tire to a central receiver module via a wireless transmitter, and then the tire pressure data is displayed. When the tire pressure is too low or there is a leak, the system will automatically alert. 2. Indirect tire pressure monitoring: The working principle of indirect tire pressure monitoring is that when the air pressure in a tire decreases, the vehicle's weight will cause the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to other wheels. By comparing the differences in rotation speeds between the tires, the system monitors the tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of the tires to monitor air pressure.
15
1
Share

What Are the Indicator Symbols on the Car Dashboard?

Introduction to the main indicator symbols on the car dashboard: 1. Door Status Indicator: Shows whether the doors are fully closed. The corresponding light turns on when a door is open or not properly closed, alerting the driver that the door is not securely shut. The light turns off once the door is closed. 2. Parking Brake Indicator: This light turns on when the parking brake lever is pulled up. It automatically turns off when the handbrake is released. In some car models, this light may also indicate insufficient brake fluid. 3. Battery Indicator: Displays the working status of the battery. It lights up when the ignition is turned on and turns off after the engine starts. If it does not light up or remains lit continuously, the generator and circuit should be checked immediately. 4. Fuel Indicator: Alerts the driver when fuel is running low. When this light turns on, it indicates that the fuel is nearly depleted. Typically, the vehicle can still travel about 50 kilometers after the light comes on before running out of fuel. 5. Washer Fluid Indicator: Shows the level of windshield washer fluid. If the fluid is nearly empty, this light turns on, reminding the driver to refill the washer fluid. The light turns off after adding the cleaning solution.
1
2
Share

What is the meaning of automotive metallic paint?

Metallic paint is created by mixing metal powder into the paint, which makes the painted metal surfaces appear more shiny and attractive. Viewed from different angles, due to light refraction, the color and even the car's contours will change, giving the vehicle's appearance a richer look. Automotive metallic paint is a high-end car coating made from metal powders such as copper and aluminum. It features a metallic luster texture that enhances the paint film's grade and fully highlights a noble, elegant temperament. There are generally two types: water-based and solvent-based. Since metal powders are unstable in water and air, often undergoing chemical reactions and deterioration, their surfaces require special treatment, making the metal powders used in water-based paints expensive and limited in application. Currently, it is primarily solvent-based. With the advancement of life and the continuous development of the automotive industry, the production of safe and environmentally friendly automotive paints can play a significant role in developing new paint markets. Metallic paint is harder than ordinary paint, making the car body less prone to scratches, and it can also showcase the beauty of the body's level. For those without a garage who can only park in open parking lots, this is a great boon.
10
1
Share

What is the function of a car air conditioning filter?

The main functions of a car air conditioning filter are: 1. Provide fresh air. It prevents the car windows from fogging up, ensuring clear visibility for the driver and safe driving; it supplies fresh air to the passenger compartment, preventing occupants from inhaling harmful gases and ensuring driving safety; it effectively sterilizes and deodorizes. 2. Ensure safety and hygiene. It keeps the air in the passenger compartment clean and free from bacterial growth, creating a healthy environment; it effectively separates solid impurities such as dust, core powder, and grinding particles from the air; it efficiently intercepts pollen, ensuring that passengers do not suffer allergic reactions that could affect driving safety. 3. Adsorb harmful substances. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air; it has strong and durable moisture adsorption capabilities. 4. Filter solid impurities. The car air conditioning filter fits tightly into the housing, ensuring that unfiltered air does not enter the cabin. It separates solid impurities such as dust, pollen, and grinding particles from the air.
18
1
Share

What to Do If Your Car Fails the Environmental Protection Test?

If your vehicle fails the environmental protection test three times, the first consideration should be whether there is an issue with the catalytic converter. Car exhaust contains many pollutants, with the primary ones being carbon monoxide, hydrocarbons, and nitrogen oxides. Under normal circumstances, the catalytic converter processes these through oxidation and reduction, converting them into harmless carbon dioxide, nitrogen, and water, thereby achieving purification. The catalytic converter is called a "three-way" catalytic converter because it contains three precious metals: platinum (Pt), rhodium (Rh), and palladium (Pd), hence the name "three-way." Solution: Before the test, drive on the highway for a while to allow the catalytic converter to reach its optimal operating temperature before testing. The most important point is not to turn off the engine before the test, as this keeps the catalytic converter at a certain temperature. If this still doesn't work, directly clean the catalytic converter and then retest to see if it passes. If it still fails, consider the following possible reasons: 1. The oxygen sensor is faulty. Solution: Replace the oxygen sensor. 2. The air filter is problematic. Solution: Replace the air filter. 3. The fuel is the issue. Solution: Add half a tank of E10 ethanol gasoline. Ethanol has a high oxygen content, which aids combustion. If none of these methods work, there is basically no other solution.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.