···
Log in / Register

Is It Normal for Newly Replaced Brake Pads to Squeak?

4 Answers
AidenRose
08/28/25 4:58am

It is normal for newly replaced brake pads to squeak. The reasons for brake pad squeaking include: 1. Poor fit of the brake pads: If the new brake pads are not properly fitted to the caliper during installation, it can cause friction and result in noise. In this case, the brake pads should be removed and reinstalled. 2. Foreign objects in the brake pads. 3. The brake pads have not been properly broken in. The noise will usually resolve itself after a period of breaking in. Brake pads, also known as brake linings, are critical safety components in a car's braking system. The effectiveness of all braking is largely determined by the brake pads.

Was this review help?
4
3
Share
LeElliot
09/10/25 3:25am

I was startled when my new brake pads started squeaking right after replacement! After checking online and consulting friends, I learned it's a normal break-in phenomenon caused by uneven surfaces or leftover manufacturing particles on the new pads. The noise usually disappears naturally after 100-300 kilometers of driving, so no need to panic. From my own experience, avoiding sudden braking and driving gently for a few days will quiet them down. However, if the sound is particularly harsh or persists beyond a week, immediately return to the repair shop to check for foreign objects or improper installation. Safety first - never ignore abnormal noises.

Was this review help?
17
5
Share
Expand All
IrisLynn
10/24/25 4:16am

As a seasoned driver with years of experience, I've encountered the squeaking sound of new brake pads several times. This is a common issue stemming from the break-in process between new components and old rotors – it's normal for vibrations to occur during initial contact. After a few city drives, the noise gradually fades. But that one time after pad replacement, the noise was exceptionally loud. Upon inspection, we found a small stone lodged in the mechanism, and the sound disappeared after removal. Remember: avoid hard braking during the break-in period – drive gently to accelerate adaptation. If you notice weakened braking or unusual noises, don't delay – seek professional help promptly.

Was this review help?
4
0
Share
Expand All
Jess
12/07/25 4:40am

Squeaking with new brake pads can indeed be normal, caused by minor vibrations as the friction surfaces haven't fully seated yet. This typically subsides after one to two weeks of normal use. However, pay attention to the sound characteristics: if it's slight and gradually diminishing, there's no need to worry; if it's sharp, persistent, or worsens at high speeds, there might be foreign objects or installation issues. During the break-in period, avoid sudden braking and maintain smooth driving. If abnormalities occur, have it checked early to ensure the braking system's health.

Was this review help?
14
5
Share
Expand All
More Forum Discussions

How long can motor oil be used after opening?

Generally, motor oil cannot be used after 6 months to 1 year after opening, as it will deteriorate if left open for too long. Here is some relevant information about motor oil: Oil classification: There are three types of engine oil for cars, namely mineral engine oil, semi-synthetic engine oil, and fully synthetic engine oil. Unlike mineral and semi-synthetic engine oils, fully synthetic engine oil is artificially synthesized, offering better performance and a longer usage period. Replacement notes: When changing engine oil, it is not necessary to choose a higher-grade oil. A higher-grade oil does not necessarily mean it is better for the car; only the engine oil that suits your vehicle is the best.
8
4
Share

Is it good or bad for a car to frequently drive on highways?

Driving on highways for extended periods is beneficial for the engine. The engine consistently operates at a relatively high RPM with optimal fuel efficiency, high combustion efficiency, and an ideal air-fuel ratio, which helps reduce carbon deposit formation. This is advantageous for emissions and lubrication, as well as prolonging the lifespan of the engine and transmission. When a car cruises at 120 km/h on the highway: Typically, the engine RPM ranges between 1600 and 3500. Smaller displacement engines tend to run at higher RPMs, while larger displacement engines operate at lower RPMs. Within this RPM range, the engine achieves the highest fuel efficiency ratio. The engine operates under closed-loop control, using an oxygen sensor to monitor the oxygen content in the exhaust. The engine's ECU adjusts the fuel injection based on the oxygen level to maintain the air-fuel ratio around 14.7:1, achieving optimal combustion and minimizing carbon deposits. During high-speed driving: Since the car is moving at high speed, sufficient air intake through the front ensures effective cooling. The engine can continuously operate under ideal conditions with good cooling, optimal lubrication, and the best air-fuel ratio, which is beneficial for extending the engine's service life.
11
2
Share

How to Check the Fuel Gauge on the Tharu?

The fuel consumption data of the Tharu can be viewed on the central trip computer screen in the instrument cluster. You can switch to the fuel consumption data by pressing the button on the right-hand stalk of the steering wheel. Below is an introduction to the Tharu: 1. The Tharu is a compact SUV under the Volkswagen brand, equipped with two engines: a 1.4-liter turbocharged engine and a 2.0-liter turbocharged engine. 2. The 1.4-liter turbocharged engine, coded as EA211-DJS, has a maximum power of 110 kW and a maximum torque of 250 Nm, with the maximum power achieved at 5000 rpm and the maximum torque between 1750 to 3000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 3. The 2.0-liter turbocharged engine, coded as EA888-DKV, delivers a maximum power of 137 kW and a maximum torque of 320 Nm, with the maximum power achieved between 4100 to 6000 rpm and the maximum torque between 1500 to 4000 rpm. This engine employs a combined injection system and uses an aluminum alloy cylinder head with a cast iron block. It is also paired with a 7-speed dual-clutch transmission. 4. The Tharu's front suspension uses a MacPherson strut setup, while the rear suspension features a multi-link independent suspension.
7
0
Share

What Causes Gear Shift Jerking in Automatic Transmissions?

An automatic transmission is a gear-shifting device that automatically changes gears based on the vehicle's speed and engine RPM, as opposed to a manual transmission. The reasons for gear shift jerking in automatic transmissions are: 1. Poor driving habits: Due to lack of skill, the driver may shift gears in a way that severely mismatches the gear position with the vehicle's speed. 2. Transmission issues: Inadequate cooling can cause the transmission to overheat, leading to problems like oil leaks, which in turn reduce oil pressure. 3. Excessive internal contaminants: Too much debris and dirt inside the transmission can interfere with its normal operation, resulting in a jerking sensation during driving.
13
0
Share

What are the effects of a failed carbon canister?

A failed carbon canister can affect fuel consumption. There are three methods to reduce vehicle fuel consumption: 1. Minimize vehicle weight: Keep the interior simple and avoid carrying unnecessary items. Each additional kilogram of load increases fuel consumption by 1%. 2. Avoid excessive vehicle modifications: Adding spoilers, protective covers, or wings can disrupt the original aerodynamic design, increasing wind resistance and consuming extra fuel. Modifying lighting systems increases electrical load, leading to unnecessary fuel consumption. 3. Develop good driving habits: Avoid sudden acceleration, high-speed driving in low gears, prolonged idling, frequent lane changes, or braking. Aim for smooth starts, steady-speed driving, and reduced braking.
2
2
Share

Can Windshield Washer Fluid with Dish Soap Remove Oil Film?

Windshield washer fluid with dish soap can remove oil film, but it is not recommended to add dish soap as it may produce foam that could obstruct the driver's vision. Drivers can purchase windshield washer fluid specifically designed to clean oil film. Relevant information about windshield washer fluid is as follows: 1. Composition: Windshield washer fluid, commonly known as car windshield cleaning fluid, is a consumable in automotive use. It mainly consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. 2. Function: Windshield washer fluid typically has wetting, penetrating, and solubilizing properties, thereby serving the purpose of cleaning and removing dirt. Additionally, due to the presence of alcohol and ethylene glycol, it can significantly lower the freezing point of the liquid, providing antifreeze effects and quickly dissolving frost.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.