Is It Normal for New Cars to Grind Brake Pads?

1 Answers
DelAngela
07/30/25 12:17am
It is normal for new cars to grind brake pads. Reasons for new cars grinding brake pads: This occurs because the brake pads and discs of a new car have not yet been properly worn in. The issue will resolve after some driving. Note that sometimes after driving in the rain, there may be unusual noises the next morning—this is normal due to slight rust on the brake disc surface. Prolonged inactivity can also cause noises, so regular driving helps prevent wear and tear. Details to consider when choosing brake pads: Check the friction coefficient, which determines the basic braking torque of the brake pads. If it's too high, it can cause wheel lock-up, loss of control, or overheating during braking; if too low, it may result in excessively long braking distances. Consider safety—brake pads generate instant high temperatures during braking, especially during high-speed driving or emergency stops. At high temperatures, the friction coefficient may decrease. Assess comfort, including braking feel, noise, dust, smoke, and odors, as these directly reflect the friction performance.
Was this review help?
17
5
Share
More Forum Discussions

What Causes the Car to Shake After Starting?

There are three main reasons why a car shakes after starting: 1. Low ignition energy: The first issue a car faces during a cold start is low temperature. The engine's internal temperature is insufficient, and both fuel and lubricant temperatures are low. Therefore, more fuel needs to be injected during a cold start to meet power requirements. The larger the spark plug gap, the lower the ignition energy. Poor fuel atomization at low temperatures requires higher ignition energy. Over time, the spark plug's ignition gap tends to widen, reducing ignition energy and affecting performance, causing the car to shake. 2. Carbon buildup on valves and intake passages: If carbon accumulates on the engine's valves and intake passages, it absorbs some fuel, leading to ECU miscalculations. For example, if the ECU controls the injection of 100 units of air-fuel mixture but only 90 units enter the cylinder, even complete combustion of these 90 units won't achieve the required power, resulting in shaking. 3. Incorrect air-fuel ratio: Inaccurate air-fuel mixture ratios can occur in both open-loop and closed-loop control systems. In closed-loop control vehicles, the oxygen sensor's minimum operating temperature is 370°C. If the exhaust pipe temperature doesn't reach 370°C upon starting, the oxygen sensor won't function. This causes the ECU to make errors in controlling the air-fuel mixture and ignition timing, reducing the car's power output and causing shaking.
9
0
Share

What are the penalties for using an original driver's license?

After a driver replaces their driver's license, the original license becomes invalid and must not be used further. If a driver continues to use the original license in violation of regulations, the traffic management department of the public security authority will impose a fine and confiscate the original license. In cases where the original license was lost and later found after a replacement was issued, the driver must surrender the original license to the vehicle management office or destroy it themselves, and must not use both licenses simultaneously. Currently, each driver's license has a unique serial number and is managed with computer traceability. After a driver applies for a replacement license, the original license and its serial number will be marked as invalid in the driver's license management system. If the original license is later found and is still within its validity period, it must still be destroyed and cannot be used. If a driver's license is lost, there is no need to report the loss. The driver only needs to bring relevant documents to the vehicle management office to apply for a replacement. During the replacement process, a copy of the ID card will be required, along with a statement on the copy declaring the loss of the original license, to complete the replacement procedure. Additionally, it is important to note that when replacing a driver's license, the accumulated demerit points in the scoring cycle must not reach twelve. This ensures a smooth replacement process. If the replacement is due to damage to the original license, the original will be confiscated on the spot.
5
3
Share

Are there any new regulations for driver's licenses in 2020?

There are new regulations for driver's licenses in 2020, specifically: 1. Self-registration is allowed. The nationwide Internet-based comprehensive traffic safety service management platform will be fully launched, enabling drivers to register online, schedule exams online, and make payments online through this platform; 2. Individuals with monocular vision can obtain a driver's license. Eligible individuals with monocular vision impairment can apply for a motor vehicle driver's license for small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, and other permitted vehicle types; 3. Relaxation of physical conditions for upper limb disabled individuals to drive. Depending on the degree of finger, palm, or lower limb disability, they can apply for a motor vehicle driver's license for small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, or small automatic transmission passenger cars specially designed for the disabled.
6
1
Share

How to Extract Fuel from a Car?

To extract fuel from a car, follow these steps: 1. Prepare the necessary tools, including a flat-head or Phillips screwdriver, pliers, a plastic tube approximately 1cm in diameter, a wire, and a container for the gasoline; 2. Open the engine compartment hood and locate the fuel lines connecting the engine and the fuel tank. There are usually three lines: one supply line, one return line, and one carbon canister line. If the owner cannot distinguish between the three lines, all three can be disconnected, and the plastic tube can be connected to the gasoline container; 3. Next, open the vehicle's relay box, locate the fuel pump relay, remove it, and use the wire to short-circuit the 85 and 86 sockets on the relay socket. The relay box cover will have markings, making it easy to identify; 4. Insert the car key and turn it to the "ON" position. For vehicles with a push-button start, press the start button without pressing the brake pedal. Once activated, gasoline will flow out of the fuel line; 5. When the container has collected a sufficient amount of fuel, the owner can turn off the ignition, remove the short-circuit wire, reinsert the fuel pump relay, and finally reinstall the disconnected fuel lines to their original positions.
10
2
Share

What are the precursors to a failing fuel pump?

Precursors to a failing fuel pump include: 1. Weak acceleration with jerking sensations when accelerating suddenly; 2. Difficulty starting the vehicle, requiring prolonged key turning; 3. Unusual buzzing noises while driving; 4. Illumination of the engine warning light; 5. Engine vibration or shaking. The primary causes of fuel pump failure are poor fuel quality, delayed refueling, and prolonged neglect of fuel filter replacement. Severe clogging of the fuel filter in the supply system forces the fuel pump to work harder, leading to damage due to prolonged high-load operation. It is recommended that drivers refuel promptly and choose reputable gas stations to ensure fuel quality and prevent damage to the fuel pump.
4
2
Share

What brand of car has two Cs on top and bottom?

The logo with two Cs on top and bottom represents NIO. Here is relevant information about NIO: 1. The upper and lower parts of the logo symbolize vision and action respectively: the upper part represents the sky, symbolizing openness, future, and goals; the lower part represents the road extending to the horizon, symbolizing direction, action, and forward momentum. NIO stands for 'A New Day'. 2. Brand vision: NIO is not just an automobile brand. By providing high-performance intelligent electric vehicles and ultimate user experiences, NIO is committed to creating a joyful lifestyle for users and building a 'user brand' worldwide.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.