Is It Normal for a New Car's Engine Bay to Be Very Dirty?

1 Answers
Omar
07/30/25 6:22am
No, it is not normal. If a new car's engine compartment has a significant amount of dust and mud, it may indicate that the vehicle has experienced issues such as flooding, accidents, or refurbishment. Another possibility is that it is a stock vehicle. Below are specific details about stock vehicles: Prone to Moisture and Aging: After leaving the factory, various fluids, electronic components, batteries, rubber seals, and tires in a new car can easily suffer from moisture and aging if they are not periodically inspected and maintained during prolonged storage. Component Aging: For stock vehicles that have been parked for too long, without proper warehouse management, the aging of electronic components and rubber products is often undetectable without professional testing equipment. Many vehicles stored for extended periods also experience issues like lack of oil or battery power.
Was this review help?
18
3
Share
More Forum Discussions

What causes the reverse light of Pajero Sport not to work?

There are several reasons that may cause the reverse light not to work: fuse issue - when the reverse light doesn't work, the first thing to consider is whether the reverse light fuse is blown. You can pull out the fuse to check if it's melted; reverse light bulb issue - if the filament of the reverse light bulb is broken, the reverse light won't illuminate even if there's power supply. Chinese legal regulations: Each vehicle must have at least one fog light at the rear. To save costs, manufacturers often design only one fog light. Many Japanese cars with symmetrical designs also install only one bulb. There are no legal requirements for front fog lights, so some Japanese cars don't have front fog lights in their standard configurations. Light position identification: The left side of the car is the fog light, and the right side is the reverse light.
10
0
Share

New Energy Vehicle License Plate Selection Rules?

New energy vehicle license plates are divided into small new energy vehicle license plates and large new energy vehicle license plates. Below is a detailed introduction to new energy license plates: License Plate Specifications: The outer dimensions are 480mm × 140mm. License Plate Colors: Small new energy vehicle license plates feature a gradient green color, while large new energy vehicle license plates have a yellow and green dual-tone design. Features: With green as the main color tone, it reflects the concept of green environmental protection. Special identifiers are added, and new anti-counterfeiting technologies and production processes are applied. This not only enables differentiated management and easy identification but also highlights the characteristics of new energy and technological innovation. License Plate Digits: The number of digits in new energy vehicle license plates has been increased from 5 to 6, expanding the capacity of license plate numbers, enriching resources, and making the encoding rules more scientific and reasonable.
15
0
Share

Where is the Crankshaft Ventilation Pipe Located?

The crankshaft ventilation pipe is located above the cylinder head. Crankshaft Ventilation: First, the crankshaft forced ventilation, accurately referred to as the crankcase forced ventilation, also known as the PCV system. Description of the Crankcase Ventilation System: The crankcase ventilation system allows the release of excess pressure and gases from the crankcase, sending them back into the engine through the intake system to be burned under any engine operating condition. The crankcase ventilation is primarily controlled by signals from the pressure sensor downstream of the throttle (engine load), the accelerator pedal position sensor (throttle pedal position), and the ambient temperature sensor. Functions of the Crankcase Ventilation System: Normal mode crankcase ventilation function, full-load mode crankcase ventilation function.
7
3
Share

Is There a Temperature Limit for Rearview Mirror Heating?

There is a temperature limit for rearview mirror heating. Function of rear window heating: The rear window heating function can remove fog and frost. The heating wires behind the mirror quickly heat the mirror surface, gradually removing rain or fog from the mirror. This eliminates the need for the driver to frequently wipe the mirror manually, thereby reducing driving hazards. Working principle of rearview mirror heating: The principle of rearview mirror heating is very simple. It involves embedding an electric heating film behind the rearview mirror, utilizing the principle of resistance heating. The temperature can reach 35-60 degrees Celsius, making it particularly effective in winter or foggy conditions, while its effect is less noticeable at normal temperatures. Generally, rearview mirror heating does not turn off automatically, so remember to turn it off after use to avoid wasting battery power. Although the heating power is not high, it is not recommended to keep it on for extended periods to prevent damage to the heating wires.
6
1
Share

Should an automatic transmission car be shifted to neutral when waiting at a red light?

An automatic transmission car can be shifted to neutral when waiting at a red light. Here are the specific explanations: 1. The professional term should be 'disengaging to neutral', and the clutch should be fully released. Releasing the clutch can extend the lifespan of the clutch cable. Additionally, when shifting to neutral and releasing the clutch, it should be done slowly. 2. After an automatic transmission car comes to a stop by braking, a creaking noise may occur the moment the brake is released. Automatic transmission cars offer higher driving comfort as they do not require close coordination between hands and feet. There is no need to constantly shift gears while driving; simply controlling the depth of the accelerator pedal can easily achieve speed changes. While driving, the control system of the automatic transmission automatically selects the appropriate gear based on the engine's speed and load, replacing the driver's subjective judgment of timing and gear shifting operations.
17
1
Share

What to Do When Mercedes-Benz Window Lifter Fails?

Solutions for Mercedes-Benz window lifter failure are as follows: 1. Pull the window button directly to raise the window to the top, then hold for 3-5 seconds before releasing. 2. Press the window button to lower the window completely, hold for 3-5 seconds before releasing, then test the one-touch function to see if the window lifter works normally. Notes: 1. If the one-touch window failure is not caused by the above reasons, it may be due to abnormal door control module, malfunctioning window control button, or damaged lifting motor. In such cases, professional inspection and repair at a 4S shop are required. 2. Generally, buttons with one-touch window function come with anti-pinch protection. For owners with children, it is advisable to purchase a vehicle equipped with this feature and always lock all four windows from the driver's control side while driving.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.