Is It Normal for a Manual Transmission to Shudder When Starting?

3 Answers
AustinAnn
07/28/25 10:40pm
Manual transmission shuddering during startup is abnormal, and the reasons are: insufficient engine power, loose connections between the transmission and chassis, or uneven engagement between the clutch pressure plate and clutch friction disc. The impacts of manual transmission shuddering during startup include: 1. Aggravating engine carbon buildup; 2. Damaging the car's spark plugs; 3. Accelerating the aging of engine components; 4. Increasing wear on the clutch pressure plate. The method for starting a manual transmission car is: 1. Insert the key and turn on the ignition switch to start the engine; 2. Press the clutch pedal and shift the gear lever into first gear; 3. Release the handbrake, lift the clutch pedal, and press the accelerator.
Was this review help?
1
4
Share
IvanLee
08/12/25 2:04am
Manual transmission jerking during start? To be honest, after driving for thirty years, I've seen this issue countless times. It's usually abnormal - mostly caused by not pressing the clutch firmly enough or releasing it too quickly, which creates mismatch between engine and wheel speeds, making the car shake like dancing. I've experienced this many times myself, usually during my novice days when I hadn't mastered the coordination between throttle and clutch. With practice, you can avoid it. But if it happens frequently, it might indicate severely worn clutch plates, and continuing to drive could damage the gearbox. I suggest finding an empty space to practice starts - release the clutch gently while applying slight throttle. Also, unstable idle speed can cause jerking, possibly from dirty throttle body (just clean it yourself). If jerking persists, better visit a workshop to check clutch wear. Don't push through - safety first.
Was this review help?
9
3
Share
Expand All
DelSteven
10/01/25 4:22am
Is it normal for a manual transmission car to shake when starting? From my personal driving experience, it's basically not normal. When I first learned to drive, it often happened, especially when I was nervous and released the clutch too quickly, causing the car to shake back and forth. Later, I realized that this is usually due to improper coordination between the throttle and clutch: either the throttle is applied too little, resulting in insufficient power, or the clutch is released too quickly. If shaking occurs frequently, it could also be an engine issue, such as worn spark plugs or a dirty air filter, leading to poor fuel supply. Develop a habit when driving: apply some throttle when starting and then slowly release the clutch. If the shaking persists, it's necessary to check if the clutch pressure plate is worn, as frequent shaking can accelerate component wear, and repairs can be costly. It's recommended to regularly maintain the engine and transmission system to prevent small issues from turning into major faults, ensuring smoother driving.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

Can I Use 95 Octane Gasoline After Using 98 Octane?

Yes, you can use 95 octane gasoline after using 98 octane, but you should first use up the 98 octane gasoline before refilling with 95 octane. Gasoline is a volatile, flammable hydrocarbon mixture liquid derived from the distillation, cracking, or pyrolysis of petroleum, used as fuel. It appears as a transparent liquid, primarily composed of aliphatic hydrocarbons, naphthenic hydrocarbons, and a certain amount of aromatic hydrocarbons. Notes on refueling: 1. Refuel in the morning or evening when temperatures are relatively lower, as the same volume of gasoline can have a higher mass; 2. Avoid filling the tank completely when driving in the city, as this can increase engine load; 3. Do not wait until the tank is empty before refueling, as insufficient fuel can prevent the fuel pump from being submerged, reducing its lifespan; 4. Avoid refueling during thunderstorms, as the fuel nozzle might introduce stray currents into the fuel tank, increasing the movement of unstable gasoline molecules and posing fire or explosion risks.
2
0
Share

Where to Check the Emission Standard for a New Car?

Methods to check the emission standard for a new car include: 1. Bring the vehicle registration certificate and driving license to the vehicle management office for inquiry; 2. Check the environmental protection label; 3. Log in to the motor vehicle environmental protection website for inquiry; 4. Check the vehicle factory certificate; 5. Make a rough judgment based on the year the car was registered. The purpose of setting automobile emission standards is to control and reduce vehicle emission pollutants and improve ambient air quality. Automobile emission pollutants include: carbon monoxide, hydrocarbons, nitrogen oxides, and PM harmful gases. Solutions for non-compliant vehicle emissions include: 1. Clean the fuel injector; 2. Replace the piston sealing ring; 3. Use higher-quality fuel.
10
2
Share

Can National 5 Vehicles Still Be Registered Now?

National 5 vehicles cannot be registered now. National 5 represents the fifth phase of China's vehicle emission control standards, where higher numbers indicate stricter standards. These emission standards are used for testing new vehicles. Methods to determine a vehicle's emission standard include: 1. Check the annual inspection label on the vehicle's front windshield—National 3 is marked as 'iii', National 4 as 'iv', National 5 as 'v', and National 6 as 'vi'; 2. Visit the Motor Vehicle Environmental Protection website, enter the VIN and the last six digits of the engine number to query. The vehicle registration process is as follows: 1. Obtain the vehicle certificate; 2. Keep the triplicate purchase invoice; 3. Pay the vehicle purchase tax and obtain the tax certificate; 4. Register and inspect the vehicle at the DMV; 5. Choose a license plate number; 6. Pay the fee and install the plate after receiving it.
11
1
Share

Where is the engine number located on the new Santana?

The engine number of the new Santana is located in two places: 1. On the plastic shell of the engine timing cover; 2. On the engine block. Taking the 2021 Santana Manual Trend Edition as an example, it is a compact car with body dimensions of 4475mm in length, 1706mm in width, 1469mm in height, and a wheelbase of 2603mm. The 2021 Santana Manual Trend Edition is equipped with a 1.5L naturally aspirated engine, with a maximum power speed of 6100 rpm and a maximum torque speed of 4000 rpm. It uses a MacPherson independent suspension for the front suspension and a composite torsion beam non-independent suspension for the rear suspension.
11
0
Share

How to Switch Between High and Low Beams?

The steps to switch between high and low beams are: 1. Rotate the light control lever located on the left side of the steering wheel all the way forward to turn on the low beams; 2. Push the lever upward to turn on the high beams, then push it downward to turn off the high beams, completing the beam switching. High and low beams adjust the intensity of light based on the distance of the filaments: 1. High beams focus the light parallel, emitting a concentrated and bright light that can illuminate distant and high objects; 2. Low beams emit light beyond the focus, between 1 to 2 times the focal length, producing a divergent light that illuminates a larger area of nearby objects.
1
1
Share

How to Replace the Battery in an Older Mercedes ML430 Key?

The method to replace the battery in an older Mercedes ML430 key is as follows: 1. Push the small toothed switch at the end of the remote to the right to remove the mechanical key; 2. Insert the mechanical key into the gap at the bottom of the key and gently pry open the back cover; 3. Remove the old battery and replace it with a new one of the same model; 4. Reattach the back cover and the mechanical key. The Mercedes ML430 is a business SUV with the following body dimensions: length 4587mm, width 1834mm, height 1775mm, wheelbase 2849mm, minimum ground clearance 204mm, and fuel tank capacity 83 liters.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.