Is it normal for a car's exhaust pipe not to drip water?

1 Answers
Dias
07/30/25 9:10am
It is normal for a car's exhaust pipe not to drip water. The dripping occurs when the engine's gasoline burns relatively completely, causing water vapor produced after combustion to condense into droplets at the exhaust pipe outlet, which then accumulate. This is why owners may observe water dripping from the exhaust pipe. The white smoke seen from the exhaust pipe in winter is also water vapor. While dripping water from the exhaust pipe can, to some extent, indicate that the car's engine is in good working condition and the gasoline is burning relatively completely, it is not the case that more dripping is better. Excessive water can damage the oxygen sensor in the car's three-way catalytic converter, affecting the regulation of fuel injection and reducing the vehicle's power performance. If, in addition to dripping water, the car's exhaust pipe makes a sputtering noise, it could be due to internal damage to the muffler or a blockage in the exhaust pipe, causing a change in the flow cross-sectional area and resulting in the sputtering noise. Owners can check the small opening under the exhaust pipe.
Was this review help?
15
2
Share
More Forum Discussions

Should the Highlander use 5w30 or 0w20 engine oil?

The Highlander is better suited for 0w20 engine oil. The differences between 5w30 and 0w20 engine oils are as follows: Operating temperature range: 0W20 engine oil has a minimum operating temperature of -35°C, indicating its freezing point is -35°C. 5W30 engine oil has a minimum operating temperature of -30°C. Except for extreme northeastern China, 5W oil is suitable for all regions, so car owners need not worry about the oil's freezing point. The viscosity coefficient of 0W20 oil is slightly lower than that of 0W30 oil, meaning the engine experiences less internal resistance during operation, resulting in relatively lower fuel consumption for the vehicle. Lubrication performance: Generally, new cars can use 5W30 oil, which is the choice for most car owners. 0W20 oil is more expensive but offers superior lubrication. It adheres well to component surfaces, easily forming a stable lubricating oil film, and prevents abnormal wear on engine parts. This oil has strong stability, typically allowing car owners to drive over 12,000 km before maintenance. In contrast, 5W30 oil has higher viscosity and adheres well to component surfaces, making it commonly used for regular household vehicles with 30-grade oil.
13
4
Share

What Kind of Water Should Be Added for Car Window Cleaning?

For cleaning car windows, windshield washer fluid should be added. Windshield washer fluid refers to a super-concentrated cleaning agent for car windows, which features properties such as non-stickiness, anti-static, anti-corrosion, dustproof, cold-resistant, acid rain-resistant, antifreeze, and UV protection. The method for adding windshield washer fluid is as follows: 1. Turn on the wiper switch to spray the windshield washer fluid from below the front windshield; 2. Continue until the spray nozzles stop spraying, then open the windshield washer fluid filler cap and add a small amount of windshield washer fluid; 3. Turn on the wiper switch again to clean out the remaining windshield washer fluid; 4. When no more fluid sprays out from the nozzles the second time, add the windshield washer fluid, and finally, close the filler cap properly. The functions of windshield washer fluid include: 1. Cleaning debris off the windshield; 2. Lowering the freezing point of the liquid; 3. Ensuring the windshield remains clear and transparent for a clear view; 4. Eliminating electric charges on the glass surface; 5. Reducing friction between the wipers and the glass to prevent scratches.
11
0
Share

How many kilometers can a Swift 1.3 travel on a full tank of fuel?

Swift 1.3 can travel 500 kilometers on a full tank of fuel. Swift, a new car brand launched by Changan Suzuki in 2005, is an "absolutely differentiated new product." True to its name, the Swift is compact and agile, often referred to as a "mini MINI-COOPER." The domestic Swift features a stylish and attractive design, complete configurations, and is economical and fuel-efficient, making it popular among many young people, especially female drivers. Below is an introduction to Changan Automobile: R&D Center: The Changan Automobile Global R&D Center is located in Yufu Industrial Park, Liangjiang New Area, Chongqing, and was officially put into use on April 9, 2019. Covering an area of over 1,000 acres with a total investment of 4.3 billion yuan, the Changan Automobile Global R&D Center is an open and shared smart R&D platform that integrates global resources. It includes 7 major functions such as design, testing, and management, covering 12 major fields including simulation analysis, noise and vibration, and crash safety. It also houses 180 laboratories for hybrid power, air conditioning systems, non-metallic materials, and more, as well as a global data center built using cloud technology.
10
3
Share

Why Does the Motorcycle Make Abnormal Noises When Shifting Gears?

Motorcycle shifting abnormal noises can be caused by improper operation, normal performance, clutch failure, sprocket wear, or chain looseness. Specific related introductions are as follows: Improper Operation: When starting the vehicle, the throttle must be closed to the minimum to avoid the occurrence of such noise. If the throttle is increased before shifting, most vehicles will produce this abnormal noise. Normal Performance: This is mainly directly related to the design and manufacturing process of the vehicle. If the manufacturing precision does not meet the standard, the clutch will not separate completely. At this time, shifting into first gear will produce a noticeable noise, accompanied by the phenomenon of the vehicle jerking forward. Clutch Failure: As the vehicle's service life increases, the clutch may experience poor separation, leading to this noise. It is very similar to the second scenario but can be reduced or completely eliminated through maintenance. Sprocket Wear: If the sprocket is excessively worn, this phenomenon can also occur, especially when the front sprocket is worn. Most motorcycles will produce this abnormal noise, mainly due to slippage between the sprocket and the chain. Chain Looseness: This phenomenon occurs only in a very few models. It is mainly caused by the chain jumping when shifting gears due to chain looseness, producing the noise.
18
1
Share

What is the method to judge a 1.5-meter distance between the right side of the car body and the sideline?

There is a dashed line in the reversing test area where you start reversing. You can use this line to maintain a 1.5-meter distance from the sideline. When the vehicle is 1.5 meters away from the left sideline, your eyes and the highest point of the steering wheel should align with the left side of the third segment of the dashed line. Here are some tips for reversing into the parking space: Keep a close eye on the rearview mirrors: During the reversing test in Subject 2, always keep an eye on the left and right rearview mirrors. If you notice one side is wider, slightly turn the steering wheel in that direction to prevent the other side from crossing the line. Also, when initially finding the right moment to turn the steering wheel fully, make sure to turn it decisively without hesitation. Maintain distance between the wheel and the corner of the parking space: When reversing with the steering wheel fully turned, the rear of the car gradually enters the parking space. Before fully entering, the wheel should maintain a 30cm distance from the corner of the parking space. Students must constantly observe from the rearview mirror and make adjustments if the distance is less or more than 30cm; otherwise, the car will definitely cross the line after entering the parking space.
3
1
Share

How to Replace a Lost Car Mechanical Key?

Replacing a car key can be done at a 4S shop, repair shop, auto parts market, or professional locksmith company. The specific details are as follows: At a 4S Shop: Getting a car key replaced at a 4S shop is the safest method. The process involves sending the vehicle's frame number, engine model, and other data to the car manufacturer. After confirming the key chip content, the manufacturer sends it back to the 4S shop, which then uses diagnostic equipment to match the key with the engine computer. However, this method is time-consuming and expensive, taking anywhere from a week to a month, and the cost increases with the car's level of advancement. At a Repair Shop: Generally, most repair shops do not offer car key replacement services because it requires specialized equipment and data. They can only handle a few simple car models. Auto Parts Market or Professional Locksmith Company: The advantage of these options is that they save time, effort, and money. In cases where all keys are lost, most cars can be processed in about two hours, and the cost is naturally much cheaper than at a 4S shop.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.