Is It Normal for a 125cc Motorcycle to Run at 80 km/h?

What are the reasons why a manual transmission car with electricity and fuel fails to start?

Manual transmission car with electricity and fuel fails to start due to: 1. Clogged fuel line; 2. Issues with the ignition coil or spark plugs. The operating principle of a manual transmission car is: By using the gear shift fork to change the transmission ratio of the meshing gears, thereby altering the driving torque to suit different working conditions. Manual transmission refers to manually moving the gear lever to change the gear meshing device inside the transmission, altering the transmission ratio to achieve the purpose of shifting gears. The steps to start a manual transmission car are: 1. Sit properly in the car; 2. Start the car; 3. Press the clutch; 4. Engage first gear; 5. Slowly release the clutch; 6. Gently press the accelerator; 7. Fully release the clutch, and the car starts successfully.

8

3

Share

How to Adjust the Headlight Height?

The methods to adjust the headlight height are: 1. Locate the headlight height adjustment button inside the vehicle and adjust it directly via the button; 2. Open the engine hood and adjust through the headlight assembly by turning the adjustment screws at the back of the headlight for mechanical adjustment. The functions of the headlights are: 1. Accurately illuminate the road ahead; 2. Improve safety during night driving; 3. Avoid affecting the visibility of oncoming drivers. Precautions for using car lights include: 1. Turn on the low beams when driving at night; 2. Do not use high beams when a following vehicle is driving close to the vehicle in front in the same direction; 3. When passing sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic signals at night, alternate between high and low beams to signal.

6

2

Share

What is the solution for black smoke coming from the Volkswagen Lavida engine?

The solution for black smoke coming from the Volkswagen Lavida engine is: take it to a repair shop to check if there is a fault in the electronic control system, and then check if the fuel injection pressure of the engine is too high. Taking the 2021 Volkswagen Lavida as an example, its body dimensions are: length 4670mm, width 1806mm, height 1474mm, wheelbase 2688mm, and fuel tank capacity 51l. The 2021 Volkswagen Lavida is equipped with a 1.4T turbocharged engine, with a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, and is paired with a 7-speed dual-clutch transmission.

14

4

Share

What is the method for adjusting valves in a four-cylinder car?

Four-cylinder car valve adjustment method is: 1. Rotate cylinder 1 to top dead center of compression, aligning with the 0 scale mark or timing gear chamber pointer; 2. Adjust the intake and exhaust valves of cylinder 1, the intake valve of cylinder 2, and the exhaust valve of cylinder 3; 3. Rotate 360 degrees, then adjust the exhaust valve of cylinder 2, the intake valve of cylinder 3, and the intake/exhaust valves of cylinder 4. The function of valves is: to control air intake into the engine. After entering the intake manifold, the air mixes with gasoline to form combustible mixture for combustion and power generation. Consequences of valve blockage include: 1. Engine idle vibration, difficulty starting when cold; 2. Engine prone to stalling after rapid acceleration and throttle release; 3. Increased fuel consumption and engine vibration.

11

1

Share

What is the warranty period for brake discs?

The warranty period for brake discs is two years. The conditions for replacing brake discs include: 1. The thickness of the brake disc is less than the minimum repair standard allowed by the vehicle manufacturer; 2. The wear indicator on the brake disc contacts the brake disc; 3. The brake disc exhibits abnormal wear or tapered wear. The correct method for replacing brake discs is as follows: 1. Check the degree of wear on the brake disc; 2. Remove the tire to access the car's brake disc; 3. The brake disc is mounted on the front wheel bearing and secured by the brake caliper on the outside. Remove the screws on the brake caliper and take off the caliper; 4. Use a hammer to tap the back of the brake disc while rotating it to remove the old brake disc; 5. Align the holes on the new brake disc with those on the bearing, then gently tap the inside of the brake disc with a hammer to ensure it is fully secured on the bearing; 6. Reinstall the brake caliper in its original position and tighten the fixing screws.

10

5

Share

What are the reasons for severe car shaking sometimes?

The reasons for severe car shaking sometimes are: 1. Severe engine carbon deposits; 2. Faulty spark plugs or ignition coils; 3. Unstable car oil pressure; 4. Aging engine components; 5. Poor fuel quality; 6. Transmission failure, unable to function properly. The solutions for severe car shaking sometimes are: 1. Read fault codes or data streams to eliminate sensor faults; 2. Check if the exhaust valve has any issues; 3. Inspect spark plugs, high-voltage wires, ignition coils, fuel injectors, timing marks, fuel pump pressure, and cylinder pressure; 4. Check if the idle control motor has any problems, clean the throttle body and idle control motor.

16

0

Share

Is It Normal for a 125cc Motorcycle to Run at 80 km/h?

What are the reasons why a manual transmission car with electricity and fuel fails to start?

How to Adjust the Headlight Height?

What is the solution for black smoke coming from the Volkswagen Lavida engine?

What is the method for adjusting valves in a four-cylinder car?

What is the warranty period for brake discs?

What are the reasons for severe car shaking sometimes?

What is the method for calibrating tire pressure on the 10th generation Accord?

Are the Alphard and Vellfire Sister Models?

What is the temperature inside a car in summer?

How often should the timing belt on the Mazda3 be replaced?