Is it no longer necessary to display the insurance decal now?

1 Answers
SanArthur
07/29/25 5:54pm
Insurance decals are still required to be displayed. The vehicle inspection compliance decal, compulsory insurance decal, and environmental inspection compliance decal—these three decals were all mandatory in the past and had to be affixed to the front windshield. However, with the introduction of new regulations, the environmental inspection compliance decal has been abolished. Now, only the vehicle inspection compliance decal and compulsory insurance decal need to be displayed. The auto insurance decal is one of the key indicators to verify whether a vehicle has compulsory traffic insurance. The insurance decal on a vehicle's windshield serves as proof that the vehicle is covered by compulsory third-party liability insurance. It allows traffic police to clearly determine whether the insurance is valid and up to date.
Was this review help?
15
1
Share
More Forum Discussions

Does changing tires affect the mileage?

Changing tires does affect the mileage. Generally speaking, as long as the tire specifications are altered, the odometer will show some variation. However, it is necessary to ensure that the diameter difference between the old and new tires is within ±3%. After switching to larger rims, there are typically two scenarios: Tire diameter and circumference remain unchanged: If the rim size is increased but the tire diameter and circumference remain the same, the vehicle's speed will not change. Tire diameter and circumference are altered: If the rim size is increased along with changes in tire diameter and circumference, when the new tire specifications are larger than the original, the actual speed of the vehicle will be higher than the speed displayed on the dashboard at the same indicated speed. Conversely, if the new tire specifications are smaller, the actual speed will be lower than the dashboard reading. Note: (When the vehicle is equipped with ABS, changing tire specifications may affect the response speed and effectiveness of the ABS, posing a safety risk).
2
4
Share

How to Adjust the Valves of a Six-Cylinder Engine?

Six-cylinder engine valve adjustment method is: 1. Turn the No. 1 cylinder piston to the top dead center at the end of compression, adjust to 1 double 5 exhaust 3 exhaust 6 no 2 intake 4 intake; 2. Rotate the crankshaft 360 degrees, adjust to 1 no 5 intake 3 intake 6 double 2 exhaust 4 exhaust. The function of the engine is: to convert the heat energy of gasoline and diesel into mechanical energy by expanding the gas after combustion in a sealed cylinder to push the piston to do work. Engine maintenance methods are: 1. Use qualified engine oil; 2. Use qualified coolant and antifreeze; 3. Regularly clean the scale in the radiator; 4. Regularly clean the carbon deposits in the engine; 5. Regularly replace the three filters of the car; 6. Maintain a reasonable speed.
10
1
Share

How to Turn on the Cold Air in a Subaru Air Conditioner?

To turn on the cold air in a Subaru air conditioner: 1. Press the MAX A/C button; 2. Adjust the temperature setting to the coldest mode. Subaru is a Japanese automobile brand, and its models include the Subaru Forester, Subaru STI, Subaru Legacy, Outback, and Impreza. Taking the 2020 Subaru STI as an example, its body dimensions are: length 4815mm, width 1840mm, height 1500mm, wheelbase 2750mm, minimum ground clearance 145mm, fuel tank capacity 60L, trunk capacity 506L, and curb weight 1567kg. The 2020 Subaru STI is equipped with a 2.5L naturally aspirated engine, delivering a maximum horsepower of 171PS, maximum power of 126kW, maximum torque of 235Nm, paired with a 7-speed continuously variable transmission.
15
1
Share

Is it necessary to replace halogen car lights?

Whether halogen lights need to be replaced depends on personal needs. If you want higher brightness, you can replace them; if you want stronger light penetration, then don't replace them. Although halogen lights are not very bright and their illumination effect is not the best, their light penetration is very strong, surpassing that of brighter xenon and LED lights. This makes them more visible to other vehicles in heavy rain, snow, or fog, enhancing driving safety. Information about halogen car lights is as follows: 1. Halogen car lights are a new generation of incandescent lamps, filled with halogen elements such as bromine and iodine or tungsten halides. To improve the luminous efficiency of incandescent lamps, the temperature of the tungsten filament must be increased, but this will correspondingly cause tungsten to sublimate and condense on the glass shell, turning it black. 2. Halogen car lights can also operate at higher temperatures than ordinary incandescent lamps, making them brighter and more efficient. However, at these temperatures, ordinary glass may soften, so halogen car lights require the use of quartz glass with a higher melting point.
2
3
Share

How to adjust the time on the GAC Trumpchi GS4?

There is a black button on the lower right side of the dashboard. Press it briefly to switch between time and mileage display. When the time is displayed, press and hold the button to make the hour digits flash, then press briefly to adjust the hour. Press and hold again to make the minute digits flash, then press briefly to adjust the minutes. Press and hold once more or do nothing to return to normal time display, confirming the adjusted time. Below is some related information about the GAC Trumpchi GS4: 1. The new Trumpchi GS4 has undergone a crucial restructuring of its pricing system. By lowering the entry price and enhancing configurations, the new GS4 has established a strong cost-performance advantage in the compact SUV segment—allowing young people to own a spacious compact SUV at a more affordable price. 2. The GS4 features a more refined and understated Lingyun Wing front grille, which complements the lower air intake design, resulting in a cohesive front-end appearance. Full LED headlights are common in this price range, and certain GS4 models not only come with full LED headlights but also matrix-style full LED headlights, providing better visibility for drivers at night and improving nighttime driving safety.
10
2
Share

What are the reasons for a new car consuming excessive fuel?

The reasons for a new car consuming excessive fuel are: 1. The driver's skill level is low, lacking driving experience; 2. The new car is in the break-in period, and many components require lubrication. The methods for using a new car during the break-in period are: 1. Preheating the cold car, as proper warm-up allows the engine oil to lubricate the engine internals effectively, reducing wear; 2. Timely maintenance is required for new cars during the break-in period. The reasons for a car consuming excessive fuel are: 1. Damaged pistons or piston rings, leading to oil burning and incomplete fuel combustion; 2. Inexperienced drivers keeping the accelerator pressed without lifting, not paying attention to shifting gears, inadvertently increasing fuel consumption; 3. Aging machinery, malfunctioning fuel control system; 4. Damaged fuel tank or fuel lines, causing fuel leakage; 5. Faulty oxygen sensor or partially clogged catalytic converter.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.