Is It No Longer Necessary to Display Insurance Stickers on Cars?

1 Answers
Lamar
07/29/25 4:30pm
Insurance stickers are not required in cities that have implemented the electronic policy policy, but they are still required in areas where this policy has not been implemented. Meaning of Insurance Stickers: The insurance sticker is one of the important indicators to determine whether a motor vehicle is covered by compulsory traffic insurance, and its design is standardized nationwide. On the windshield of a motor vehicle, you can see the motor vehicle insurance sticker, which indicates that the vehicle is covered by compulsory third-party liability insurance. Replacement of Insurance Stickers: After the owner of a motor vehicle first purchases compulsory third-party liability insurance, it must be renewed annually thereafter. The insurance sticker is also replaced every year, with a different background color each year.
Was this review help?
2
4
Share
More Forum Discussions

What are the appropriate situations for manual transmission gears 1-5?

Manual transmission gears 1-5 are used in the following situations: 1. 1st Gear: Used for normal starting or climbing very steep slopes. The speed is generally around 10 km/h when using this gear. 2. 2nd Gear: Used as a transition gear for acceleration after starting, or for low-speed driving and climbing steep slopes. The speed is generally around 20 km/h. 3. 3rd Gear: Used at speeds between 20-40 km/h, commonly used for city driving. 4. 4th Gear: Used at speeds between 40-60 km/h. 5. 5th Gear: Can be used at speeds of 60 km/h or higher.
5
0
Share

Can a dent in the trunk be sucked out?

A dent in the trunk cannot be sucked out. After the trunk is damaged, its internal structure is compromised, making it impossible to use suction tools to pull it out. The only solution is to hammer and reshape it from the inside, but this method will damage the car's paint surface. After the repair is completed, it will need to be sanded and repainted. A dent in the trunk can be repaired through metalworking and painting, which is a relatively convenient and quick method. The specific steps are as follows: 1. Metalworking is required: To restore the dented area at the rear of the car to its original shape, a hammer must be used to knock it out, and welding may be necessary in some cases. 2. After metalworking repair: Any uneven areas need to be smoothed out with specialized putty. After applying the putty, sandpaper of different grits is used to sand and level the surface, correcting any unevenness in the putty.
6
4
Share

Is it safe to drive in 5cm high heels?

5cm high heels are not suitable for driving. According to traffic safety regulations, driving while wearing slippers, high heels over 4cm, barefoot, or holding a phone call is prohibited as these actions hinder safe driving. Violators will be penalized with a 2-point deduction and a fine. The negative effects of driving in high heels are as follows: 1. Affects braking or acceleration: Due to the excessive heel height (over 4cm), when the driver attempts to press the brake or accelerator, the heel can easily get stuck in the gap between the pedal (brake or accelerator) and the car floor, preventing full pedal depression and severely impairing normal driving. 2. Difficulty switching between pedals: When transitioning between the accelerator and brake pedals, the heel is prone to getting stuck during the switch. 3. Reduced pedal depth perception: Wearing shoes with thick soles, such as platform shoes or height-increasing shoes, weakens the foot's perception of pedal depth, leading to excessive acceleration or deceleration.
4
4
Share

What is the most suitable angle to adjust car rearview mirrors?

Here are the appropriate angle positions for car rearview mirrors: 1. Center rearview mirror. The ground and sky should each occupy half of the mirror. 2. Right side mirror. In the right car rearview mirror, the sky should occupy only one-quarter, and the car body should also occupy one-quarter. 3. Left side mirror. Using the horizon as a reference, adjust the mirror so that the sky and ground each occupy half. Then, for the left and right angles, adjust the car body to occupy about one-quarter of the mirror surface. Notes: When adjusting car rearview mirrors, ensure you do so based on your normal driving posture, not by leaning closer to observe the mirrors for adjustment.
4
3
Share

What Causes the Buzzing Sound When Accelerating a Car?

Here are the reasons why a car makes a buzzing sound when accelerating: 1. Severe carbon buildup in the engine. 2. The air filter is clogged or not functioning properly. 3. The engine oil used is not pure enough. 4. The spark plugs are worn out. 5. There is a fault in the cylinder. If the buzzing noise mainly comes from the engine when accelerating, the primary causes are: 1. The vehicle has just started, and the engine oil hasn't fully lubricated all internal components, leading to the noise. This sound usually disappears after the car runs for a while. 2. If the noise persists after the vehicle has been running for some time, it may indicate severe internal wear in the engine. 3. The engine has been used for too long without cleaning, resulting in increased carbon buildup. In this case, it is recommended to thoroughly clean the engine as soon as possible.
8
4
Share

Why does the car wiper become blurry for a few seconds and then clear again?

It may be due to poor contact angle between the wiper and the windshield, requiring wiper replacement; or the windshield washer fluid may be impure, necessitating a change of fluid; or the windshield may need thorough cleaning as there could be oil residue on the surface. Here are some wiper maintenance guidelines: 1. When using the wiper to remove dust from the windshield on sunny days, always spray windshield washer fluid and avoid dry wiping. 2. If there are other stubborn or hard contaminants on the glass, clean them manually. These substances can easily damage the wiper blade, leading to ineffective wiping. In severe cases, the wiper motor may also be affected. 3. When lifting the wiper blade during car washing or daily cleaning, hold the "backbone" of the wiper blade and gently return it to its place. Do not snap the blade back abruptly. 4. In winter, use an ice scraper to remove ice chips from the windshield surface first to avoid putting extra strain on the wiper.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.