Is it no longer necessary to display insurance decals on vehicles now?

1 Answers
McMaya
07/30/25 9:44am
Yes, but only in a few individual cities where it's not required. Cities that mandate the display still require strict compliance with regulations. Many regions currently do not strictly enforce the display of insurance decals, but the annual inspection decal must be displayed, indicating that the vehicle has passed inspection and is safe for road use. Additional information: 1. Originally, the right side of the front windshield had at least two or three decals that needed regular replacement, which could also affect the driver's visibility. 2. With the development of the internet, it's possible to go without physical decals, keeping the windshield clean—a benefit of digitalization. Although decals may not be displayed, one can still check online at any time to verify if insurance has been purchased.
Was this review help?
15
4
Share
More Forum Discussions

What type of vehicle is the Dongfeng Peugeot 3008?

Peugeot 3008 is a compact SUV. Below are the relevant details of the Peugeot 3008: 1. Body design: Its unique body design combines the height of an SUV with the length of an MPV, making it more aligned with Chinese aesthetic preferences. It features sharp and dynamic lines, a relatively bold exterior, and increased body dimensions in length, width, and height while maintaining the same wheelbase. 2. Interior features: It comes equipped with cruise control, vehicle stability system, HAC hill-start assist system, and an electronic parking brake. Mid-range and high-end models also include cruise control, automatic dual-zone air conditioning, front seat heating, and six airbags. 3. Powertrain: There are two engine options available for consumers. One is a 2.0L naturally aspirated engine with a maximum power output of 147 horsepower and a maximum torque of 200N·m. The other is a 1.6L turbocharged engine with a maximum power output of 163 horsepower and a maximum torque of 240N·m. In terms of transmission, the domestic 3008 2.0L models are equipped with a 5MT or 6AT transmission, while the 1.6T models come with a 6AT transmission.
18
3
Share

Do car owners need to go together when the 4S shop handles the license plate?

Car owners do not need to go together when the 4S shop handles the license plate, only providing the ID card is required. To apply for a new car license plate, you need to go to the local vehicle management office, and the required documents include ID card, vehicle certificate, vehicle parameter table, the second and fourth copies of the car invoice, vehicle purchase tax, and compulsory insurance of the car. The following are the precautions for car license plate application: 1. Determine the type of license plate to be applied: After determining whether to apply for a local license plate or an out-of-town license plate, pay the purchase tax according to the regulations. The vehicle purchase tax should be paid in the vehicle's registered location. If you choose a local license plate, you must pay the purchase tax locally. If you choose an out-of-town license plate, you must pay the purchase tax out of town. 2. Fully understand relevant information: Before purchasing a new energy vehicle, you must determine whether a charging pile can be installed and understand relevant information. You must also understand important information such as the application process for special license plate quotas and financial subsidy standards.
1
5
Share

What are the reasons for the sudden increase in fuel consumption of Volkswagen Bora?

Volkswagen Bora's sudden increase in fuel consumption may be caused by engine carbon deposits, spark plug failure, abnormal tire pressure, and other reasons. Engine carbon deposits: During long-term operation of the vehicle, gasoline inevitably produces carbon deposits and sludge during combustion. If these sludge and carbon deposits are not cleaned in time, they will lead to an increase in car fuel consumption. It is necessary to clean the engine carbon deposits. Spark plug failure: The function of the car spark plug is to use high-voltage electricity to generate sparks to ignite the mixed gas. If damaged, it will reduce the ignition energy, causing uneven combustion of the mixed gas, which will lead to slower vehicle acceleration and increased fuel consumption. Replace the spark plug or clean the carbon deposits on the spark plug. Abnormal tire pressure: Abnormal tire pressure can also affect the car's fuel consumption. When the tire pressure is too low or the tire tread is severely worn, the contact area between the tire and the road surface increases, friction increases, rolling resistance increases, and fuel consumption naturally rises. Check the tire pressure and replenish it in time.
16
5
Share

How to switch the display on JH6 instrument panel?

Click on Hardware and Sound under the Control Panel, or click on Appearance and Personalization to switch and adjust. Click on Display, then locate and adjust the brightness slider in the illustration. Below are relevant details about the FAW JH6: 1. Weight: The FAW JH6 weighs 6.805 tons, with suspension options including multi-leaf springs, fewer-leaf springs, and air suspension for the drive axle. The use of fewer-leaf springs and air suspension can reduce the overall vehicle weight, freeing up more cargo capacity. This truck targets the long-haul transportation market, emphasizing lightweight design and time efficiency. To further enhance the vehicle's operating range and mileage, the manufacturer offers optional dual fuel tanks and dual fuel filler ports. 2. Design: The entire cab features a three-layer shock absorption design from inside to outside and bottom to top. Vibrations are filtered layer by layer, ensuring minimal noticeable vibration for the driver, resulting in a very comfortable experience. The JH6 Excellence Edition adopts a four-point air suspension design, further improving the cab's shock absorption performance. The driver's seat uses airbag shock absorption and supports six adjustment functions: tilt angle, height, back support, lumbar support, fore-aft movement, and backrest adjustment.
7
5
Share

What are the differences between Tesla V3 and V2?

Tesla V3 and V2 have the following differences: 1. Faster charging speed: In May 2019, to meet market demands, Tesla increased the maximum peak power of V2 Superchargers from 120kW to 145kW, further improving charging speed. However, compared to V3 Superchargers with a maximum peak power of 250kW, the charging speed of electric vehicles using V2 Superchargers is significantly slower. 2. Lighter and more flexible: To facilitate use by female owners with less strength, Tesla redesigned the charging gun for V3 Superchargers. By adopting liquid-cooled cables, the diameter of the cable was reduced from 36.3mm in V2 to 23.87mm, making it easier for owners to plug and unplug the charging gun. 3. Added new features: V3 Superchargers come with a new feature called 'On-Route Battery Warm-Up.' During the journey to a V3 Supercharger using the vehicle's navigation, the car will automatically preheat the battery to ensure it reaches the ideal charging temperature at the start of the charging process. According to Tesla's calculations, the combination of V3 Superchargers and the preheating function can ultimately reduce the average user's charging time by 50%.
9
5
Share

How to Use Cruise Control on the Buick GL8?

The Buick GL8 can use cruise control when the speed reaches above 40 km/h. After turning on the switch, press the deceleration button to activate it. Below are the specific steps for using cruise control: 1. Activate the Speed Cruise System: Slide the switch to the "ON" position to turn on the speed control system. 2. Set the Cruise Speed: After the system is activated, when the vehicle reaches the desired speed, press the "SET" button to maintain that speed continuously. After setting the cruise speed, you can still accelerate using the accelerator pedal as usual. Once the pedal is released, the system will restore the speed to the set cruise speed. 3. Reduce Cruise Speed: Press the "SET" button. If you release the "SET" button when the speed is below 40 km/h, the stored value will be deleted. If necessary, you can use the "SET" button to reset the cruise speed when the speed exceeds 40 km/h. 4. Increase Cruise Speed: Without pressing the accelerator pedal, press "RES" to increase the set cruise speed. Each press of the "RES" switch increases the speed. If you hold the switch, the vehicle will continue to accelerate. Once the "RES" switch is released, the current driving speed will be stored in the memory.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.