···
Log in / Register

Is it necessary to warm up the car before changing the engine oil?

1 Answers
EllieLee
09/05/25 4:17am

It is necessary to warm up the car before changing the engine oil. Generally, the car should be warmed up for about 5 minutes before changing the oil, as this allows the old oil to drain more completely. Benefits of warming up the car before changing the oil: 1. Engine oil is a liquid with a certain viscosity. If the temperature is low, the viscosity will be higher, making it difficult for the oil to flow out after removing the oil pan drain plug. 2. There may be sludge inside the engine, which will soften after warming up the car, allowing the sludge to be flushed out along with the oil. 3. Removing the oil filter becomes easier after warming up the car. When changing the engine oil, the oil filter should also be replaced. The area around the oil filter is often covered with oil and sludge, making it difficult to remove when the engine is cold.

Was this review help?
14
5
Share
More Forum Discussions

Where is the cabin air filter located in the Range Rover Evoque?

The cabin air filter in the Range Rover Evoque is located behind the glove compartment on the passenger side, and the white bracket needs to be removed during replacement. Functions of the cabin air filter: 1. Ensures the filter tightly seals against the housing to prevent unfiltered air from entering the cabin; 2. Separates dust, pollen, and solid particulate matter from the air; 3. Adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, and CO2 from the air. Taking the 2020 Range Rover Evoque 249PS Youth Edition as an example: It uses a gasoline engine with a 48V mild hybrid system; equipped with a 2.0T 249-horsepower L4 turbocharged engine and a 9-speed automatic transmission; features include a rearview camera, cruise control, and driving mode switching.
2
2
Share

Why does the clutch not spring back?

Clutch not springing back is caused by the reduced elasticity of the diaphragm spring in the clutch. When encountering this situation, the diaphragm spring needs to be replaced. The clutch is a crucial component in the vehicle's transmission system, connecting or disconnecting the engine from the gearbox. Every time you shift gears or start the car, you basically need to use the clutch. The clutch is fixed to the engine flywheel. After disconnecting the connection between the gearbox and the engine, you can see the clutch pressure plate, and beneath it is the clutch disc. The pressure plate has a diaphragm spring. If the diaphragm spring has been used for a long time, its elasticity will decrease, which affects the clutch pedal's springiness, requiring the replacement of the clutch's diaphragm spring.
3
4
Share

Which company does the Lynk & Co 03 belong to?

Lynk & Co 03 is a vehicle under the Lynk & Co brand, which is a premium automotive brand owned by Geely Group. It was jointly established by Geely Auto Group and Volvo Cars, and is built on the CMA architecture developed through the collaboration between Geely and Volvo. The 2021 Lynk & Co 03 1.5T model is a compact car equipped with a turbocharged engine, manual transmission, MacPherson independent suspension, and multi-link independent suspension. At the rear, the Lynk & Co 03 features 'L'-shaped taillights and dual round exhaust pipes, maintaining a high resemblance to the concept car and offering strong recognition. In terms of exterior design, the production model adopts split-type headlights and a horizontal grille, closely mirroring the concept car. Additionally, the body styling continues the concept car's design, particularly the slightly sloping C-pillar.
2
0
Share

What Are the Reasons for Difficult Cold Starts?

Difficult cold starts can be attributed to the following reasons: 1. Engine oil fluidity: The fluidity of engine oil is a significant factor affecting cold starts, especially in winter when reduced oil fluidity increases friction resistance during cold starts. It is recommended that car owners promptly change the oil grade; 2. Car battery: The charging and discharging performance of a car battery declines in low-temperature environments. When the battery cannot supply enough power to meet the starter's demand, the car becomes difficult to start; 3. Carbon deposits in the car: Carbon deposits can accumulate in various parts of the car, including the throttle valve, fuel injector, and spark plugs. Cold starts are relatively more challenging, and with the already low surrounding temperatures in winter, blockages in the throttle valve or fuel injector can further reduce gasoline atomization, affecting the engine's normal startup.
3
0
Share

What is the reason why the clutch cannot engage a gear when pressed down?

Clutch cannot engage a gear when pressed down due to: 1. Disconnection or jamming of the clutch pedal-clutch master cylinder transmission mechanism; 2. Leakage or jamming of the clutch master cylinder; 3. Pipeline leakage; 4. Slave cylinder leakage or mechanical transmission abnormality. Solutions: 1. Avoid prolonged semi-engaged state; 2. Fully depress the clutch pedal before shifting gears; 3. Simultaneously press brake and clutch during emergency braking. The clutch is located in the flywheel housing between the engine and transmission, with its assembly fixed to the rear plane of the flywheel by screws. The output shaft of the clutch serves as the input shaft of the transmission.
20
2
Share

What are the reasons for the reduction of car coolant?

The reasons for the reduction of car coolant are: 1. Leakage in the engine cooling system, causing the coolant to leak out; 2. Thermal expansion and contraction. It is normal for the coolant to slowly decrease, but if the coolant level changes significantly within a certain period, attention should be paid. Coolant is a type of antifreeze coolant that prevents freezing and cracking of the radiator and engine cylinder block during cold seasons. Precautions for car coolant include: 1. Some engines are filled with long-life coolant, and after working for a period of time, the radiator cap should be opened for inspection. When dirt, rust, or sediment appears in the radiator, the coolant should be replaced promptly; 2. Do not come into contact with antifreeze, as both the antifreeze and its additives are toxic substances. Avoid contact and store them in a safe place.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.