···
Log in / Register

Is it necessary to walk around the car in Subject 2?

6Answers
SilasMarie
07/29/2025, 07:49:45 PM

Subject 2 does not require walking around the car. Walking around the car is a rule for Subject 3. Tips for scheduling Subject 2: The system uses the latest of the following three times as the sorting rule: the applicant's business acceptance time, the last exam time, and the last cancellation time of the exam appointment. Those ranked higher will be prioritized for the exam. Mastering these tips will make scheduling much easier. Subject 2 exam content:

Was this review help?
109
Share
MacIsla
08/15/2025, 11:16:28 PM

I remember during the second driving test, we indeed had to walk around the car for inspection—it was a mandatory rule taught by our instructor. Before getting into the car, you must slowly walk a full circle to check if the tires are flat or bulging, and confirm there are no obstacles like stones or bottles around. The examiner watches closely, and if you directly open the door and get in, even if you score full marks on other items, you’ll lose points or even fail. I took the test twice myself—the first time, I suffered because I forgot to check the left rear wheel, and the examiner said the inspection wasn’t thorough, so it counted as a fail. Honestly, it’s a good habit—not just for the test but also for daily driving. Doing this before driving helps avoid accidents, like if a child is in a blind spot. The second driving test is all about laying a foundation for safety, and walking around the car is the first step. Don’t slack off—stick to it to stay reliable.

Was this review help?
2
Share
Expand All
Brielle
10/19/2025, 12:21:16 AM

From my teaching experience, walking around the car is a crucial step in the second driving test and cannot be skipped. I always remind every student: before the test, make sure to walk around the car once, focusing on checking the tires, the ground, and the vehicle's exterior. The test rules clearly state that inadequate inspection will result in immediate point deductions, and many people fail because of this. Once, a student thought it was unnecessary and skipped it, only to receive a failure warning as soon as the car started. This is not just a test requirement but also a safety habit. In daily driving, checking before getting in can prevent many accidents, such as running over tools or animals. Therefore, I advise everyone to take this step seriously, treating it as an essential ritual to ensure safety first.

Was this review help?
9
Share
Expand All
OSimon
12/01/2025, 11:56:48 PM

From a safety perspective, walking around the vehicle is a mandatory part of Subject 2 in the driving test, serving as a crucial step to prevent accidents. Circling the car before getting in allows you to check both the vehicle's condition and the surrounding environment, avoiding potential issues once the test begins. For example, problems with the tires or objects in blind spots could lead to accidents. Failing to perform this check during the exam will result in point deductions, directly affecting your score. This practice is equally important in real-world driving to prevent accidents. In short, it must be done.

Was this review help?
10
Share
Expand All
AubreeAnn
01/22/2026, 01:21:03 AM

I was extremely nervous before taking the driving test (Subject 2), but walking around the car helped me relax. According to regulations, you must slowly walk a full circle to inspect the tires, ground, and surroundings of the vehicle. Once, I was so flustered that I forgot to check the right side, and the examiner deducted points with a warning—I almost failed. Later, I consciously made it a habit and passed the test smoothly. This step isn't just about rules; it also helps stabilize your mindset and develop safety instincts. My advice: don’t skip it—complete it thoroughly.

Was this review help?
2
Share
Expand All
MacJordan
04/18/2026, 01:16:37 AM

The subject two driving test rules clearly require walking around the vehicle for a basic safety inspection. You must check the tires and obstacles while walking to ensure everything is normal. If skipped, the examiner may deduct points depending on the situation, or directly fail you in severe cases. This step originates from practical driving needs, such as checking blind spots to avoid accidents. It's crucial to take it seriously during the test—don't skip it for convenience. Also develop this habit in daily driving to enhance safety awareness.

Was this review help?
6
Share
Expand All
More Q&A

Which is Faster: Automatic or Manual Transmission?

Whether a manual transmission accelerates faster than an automatic transmission depends on the specific type of transmission: 1. CVT transmission: Manual transmission accelerates faster than automatic. 2. Dual-clutch transmission: Automatic transmission accelerates faster than manual. Below are the differences between manual and automatic transmissions: 1. Different levels of operational difficulty: Manual transmissions are suitable for skilled drivers; automatic transmissions are suitable for beginners. 2. Different structures: Manual transmissions have a clutch; automatic transmissions do not. 3. Characteristics of manual transmissions: Quick response, stable performance, good fuel economy, and strong power. 4. Characteristics of automatic transmissions: Extends the lifespan of components, improves vehicle performance, and reduces air pollution.
109
Share

Should Vehicle Maintenance Be Based on Mileage or Time?

Whether to perform maintenance based on time or mileage generally follows the principle of whichever comes first. There is no fixed answer, as car owners need to analyze their vehicle's specific conditions to determine the optimal approach. Here is a brief introduction to vehicle maintenance: (1) Routine Maintenance: Typically performed every 5,000KM (or 7,500KM for some models), it mainly involves changing the engine oil and oil filter, inspecting the fuel filter (many modern vehicles no longer have one), and checking the air filter—replacing them if excessively dirty. Additionally, each maintenance session must include an inspection of the brake discs and pads for potential replacement, checking the brake fluid level, and assessing tire conditions to ensure safety. (2) Periodic Maintenance: Usually conducted every 3 years or every 40,000KM. Beyond routine maintenance, it includes cleaning the fuel injectors, throttle body, and the vehicle's intake system. Furthermore, it requires replacing transmission fluid, front and rear axle oil, coolant, and brake fluid. Tire wear should also be inspected, with replacements made if necessary. (3) Major Maintenance: Typically occurs after the vehicle has traveled 100,000KM, involving a comprehensive inspection and replacement of parts as needed. Special attention should be paid to the wiring (electrical circuits) and transmission mechanisms during this phase.
108
Share

What Are the Reasons for No Hot Air in a Car?

Car no hot air reasons are as follows: 1. Thermostat failure, causing the cooling system to prematurely enter a large circulation cycle resulting in no hot air. 2. Dirty or clogged air filter, affecting the effectiveness of the hot air. 3. Broken heater control button, unable to transmit the corresponding hot air supply signal, leading to no warm air. 4. Clogged heater core, preventing coolant from passing through the small radiator resulting in no hot air. Below is the principle of car hot air: When the car air conditioning is heating, the high-temperature coolant from the engine flows through the heater core. At this time, the air blown by the blower also passes through the heater core, allowing the car air conditioning vents to blow out warm air.
119
Share

What does VSC on a car mean?

The VSC on a car refers to Vehicle Stability Control, which translates to Body Stability Control System in Chinese. It is an active safety system developed by Toyota Motor Corporation, consisting of a converter composed of devices with turn-off capability (such as Insulated Gate Bipolar Transistors (IGBT)). The VSC system has three main features: (1) Real-time monitoring: The VSC system can monitor the driver's control actions (steering, braking, throttle, etc.), road conditions, and the vehicle's motion status in real time, and continuously sends commands to the engine and braking system. (2) Active intervention: Safety technologies like ABS mainly intervene in the driver's actions but cannot regulate the engine. The VSC system, however, can actively adjust the engine throttle to control engine speed and adjust the driving and braking forces on each wheel to correct oversteering and understeering. (3) Prior warning: When the driver operates improperly or the road conditions are abnormal, the VSC system will alert the driver with a warning light.
111
Share

Can a C1 license drive a 9-seater vehicle?

C1 driver's license can drive small passenger vehicles with 9 seats or less (including 9 seats). The permitted driving scope of a C1 driver's license includes small and mini passenger vehicles, light and mini cargo vehicles, and light, small, and mini special-purpose vehicles; small passenger vehicles accommodate 9 or fewer people. C1 driver's license cannot drive: large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, a C1 license cannot drive vehicles with more than 9 seats or trucks with a total length exceeding 6 meters.
101
Share

How to Fix a Twisted Seat Belt?

Solution for a twisted seat belt: Remove the trim panel on the B-pillar inside the car, unscrew the seat belt mounting bolt, straighten the seat belt, and then tighten the bolt and reinstall the trim panel. The critical importance of seat belts for travel safety is self-evident. When there is an issue with the seat belt, it should be taken seriously. Before traveling, inspect the seat belt to ensure it functions properly. Below are some precautions regarding seat belt usage: 1. Correct use of seat belts: The seat belt should be fastened across the hips and chest, forming a horizontal V-shape over the pelvis and ribcage. It should only be used by one person; sharing is strictly prohibited, and the seat belt should not be twisted during use. 2. Seat belt status when not in use: When no one is seated, the seat belt should be retracted into the reel, and the buckle should be placed in the storage position to prevent it from hitting other objects during emergency braking. 3. Pay attention to seat angle: Do not tilt the seat back too much, as this may affect the effectiveness of the seat belt. Ensure the buckle is securely fastened to prevent it from coming loose under force and failing to provide protection.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.