Is it necessary to turn on the cabin overheat protection?

What are the causes of Peugeot 308sw emission failure?

Peugeot 308 emission control system failure causes include: substandard gasoline quality leading to catalytic converter poisoning, and damage to the oxygen sensor in the catalytic system. The impacts of engine emission control system failure are: 1. Affecting other systems: The mixture correction loses its basis, causing inaccurate fuel injection control by the computer, which over time affects the engine, catalytic converter, oxygen sensor, etc. You can clearly feel abnormalities in the engine's power, fuel consumption, and idle speed. 2. Performance deterioration: Due to the use of fuel or lubricating oil, the catalytic converter may become poisoned and its activity reduced, affecting the catalytic conversion efficiency. Sulfur, phosphorus complexes, and deposits may form inside the catalytic converter, leading to deterioration in vehicle performance, resulting in reduced power performance, increased fuel consumption, and worsened emissions.

3

2

Share

Can You Turn on the Heater Without Igniting the Car?

You cannot turn on the heater without igniting the car, and the reasons are: 1. It will cause the battery to discharge without being charged, damaging the battery; 2. The wiring supplying the heater may burn out without current. The method to turn on the car heater is: 1. Start the engine for preheating and wait until the engine temperature gauge reaches the middle; 2. Turn on the heating air conditioning and set the air circulation to external circulation to expel the cold air from the car; 3. After 2 to 3 minutes, set the air circulation to internal circulation. The functions of car air conditioning are: 1. Adjusting the temperature, humidity, airflow direction, and speed inside the car, and improving the air quality through the filter; 2. Providing a comfortable riding environment for passengers and reducing travel fatigue.

12

3

Share

What is the adjustment method for drum brakes?

Drum brake adjustment method is: adjust the nut below the brake pedal. The function of the brake is to reduce speed or stop the vehicle. Its working principle is to use the friction between the brake pads and the brake drum, as well as between the tires and the ground, to convert the kinetic energy of the moving vehicle into heat energy through friction, thereby slowing down or stopping the vehicle. The reasons for brake failure are: 1. Impurities in the brake master cylinder or poor sealing; 2. Vacuum booster pump failure; 3. Brake fluid is too dirty; 4. Brake master cylinder or wheel cylinder oil leakage; 5. Air leakage in the air reservoir or pipeline connections; 6. Severe overload; 7. Brake drum carbonization; 8. Insufficient brake fluid in the brake master cylinder; 9. Wear of the brake master cylinder piston.

1

0

Share

Does the Cadillac CTS-V have a coupe version?

The Cadillac CTS-V does have a coupe version. Taking the 2012 Cadillac CTS-V as an example, it is a mid-to-large-sized car with body dimensions of 4807mm in length, 1883mm in width, and 1400mm in height, with a wheelbase of 2880mm and a curb weight of 1946kg. The 2012 Cadillac CTS-V features a short/long arm front suspension and a multi-link independent rear suspension. It is a rear-wheel-drive vehicle equipped with a 3.6L naturally aspirated engine, delivering a maximum horsepower of 322PS, a maximum torque of 373Nm, and a maximum power output of 237kW. It is paired with a 6-speed automatic transmission with manual shift mode.

8

0

Share

What is the maximum speed limit during the break-in period of a new car?

The maximum speed during the break-in period of a new car is 80 kilometers per hour. The items for the first maintenance of a new car are: 1. Replace the engine oil, oil filter, fuel filter, and air filter; 2. Check whether the level of the car coolant meets the requirements; 3. Check the level of the brake and clutch fluid; 4. Check whether the oil level in the power steering fluid reservoir meets the requirements; 5. Check whether there is any oil leakage at the oil pipe interfaces; 6. Check the level of the battery fluid and the windshield washer fluid; 7. Check the tightness and aging of the belts for the generator, air conditioner, water pump, and power steering pump; 8. Check the tire pressure and wear condition of the car; 9. Check whether the car's exhaust emissions meet the standards.

10

0

Share

What Causes Vibration After Vehicle Startup?

The reasons for vibration after vehicle startup are: 1. Abnormal fuel pump supply pressure or incorrect readings/malfunction of the intake pressure sensor; 2. Aging of engine components or engine mounts; 3. Dirty throttle body or excessive carbon buildup in fuel injectors; 4. Abnormal engine coolant temperature. The vehicle starting procedure is: 1. After sitting in the driver's seat, press the start button once for ACC light, then press again for system self-check; 2. Depress brake pedal and press engine start button for ignition; 3. Release foot brake and optionally warm up the engine; 4. Depress brake pedal again, shift to D gear and release parking brake (for electronic parking brake, simply press the button); 5. Gradually release foot brake to complete the starting process.

4

2

Share

Is it necessary to turn on the cabin overheat protection?

What are the causes of Peugeot 308sw emission failure?

Can You Turn on the Heater Without Igniting the Car?

What is the adjustment method for drum brakes?

Does the Cadillac CTS-V have a coupe version?

What is the maximum speed limit during the break-in period of a new car?

What Causes Vibration After Vehicle Startup?

What kind of engine oil does Vios use?

What are the differences between two-wheel drive and four-wheel drive in cars?

Why does the car sometimes fail to accelerate?

How to Use the Rearview Mirror Heating in Volkswagen Cars?