Is it necessary to shift gears after slowing down in a manual transmission car?

What Causes the Engine Warning Light to Illuminate in the Buick Excelle?

The engine warning light in the Excelle may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel or oil quality issues: Failure to use the fuel or oil as specified by the manufacturer may cause engine wear, leading to the illumination of the warning light. Poor combustion of the air-fuel mixture: This can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, or clogged fuel lines can all cause poor combustion of the air-fuel mixture. Turbocharger issues: Problems with the intake boost piping or turbocharger can also trigger the engine warning light. The most common issue is turbocharger damage, often accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: Issues with the vehicle's intake system may lead to engine pipe blockages, and in severe cases, trigger the engine warning light. A dirty or uncleaned air filter can cause intake problems. Exhaust problems: Exhaust system faults can also cause the engine warning light to illuminate. Common causes include rear oxygen sensor failure, catalytic converter issues, or faults in the exhaust camshaft and bearings. The catalytic converter is most frequently affected, especially when using leaded gasoline, lead- or silicon-containing lubricant additives, physical damage to the converter, or fuel system malfunctions. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or if there is a mismatch between the anti-theft controller and the engine ECU, the anti-theft system may prevent the engine from operating normally, accompanied by the illumination of the engine warning light. If the engine warning light illuminates, follow these steps: First, check if the engine is running normally. Look for symptoms such as shaking or black smoke. If present, avoid restarting the engine. Note: Never restart the engine if the light is red. If the engine can be started, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'on' position (without depressing the clutch). The vehicle will enter self-check mode. After 5-10 seconds, observe if the warning light turns off. If the light remains on, visit a service center as soon as possible. Technicians can use a diagnostic tool to retrieve trouble codes, identify the issue, and perform targeted repairs.

14

1

Share

Can the ETC card be removed when not on the highway?

The ETC card can be removed, but the ETC device will not function without it. According to Article 9 of the "Rules for the Use of the Non-stop Rapid Transit System," the ETC card must be inserted into the OBU device for normal operation; otherwise, user information cannot be read. If the card is removed, you can use the manual lane and have the staff swipe the card. When the ETC card is inserted into the OBU device, there will be a prompt sound, indicating that the device is activated. Without the card, the device remains in a dormant state and cannot recognize vehicle information at toll stations, so removing the card disables ETC functionality. ETC is a non-stop electronic toll collection system, also known as an automatic road toll system. It is a specialized method for toll roads, commonly used on highways, toll bridges or tunnels, and certain urban road sections to alleviate traffic congestion. ETC Deduction Principles: Highways have one or more ETC lanes. Through dedicated short-range microwave communication between the vehicle's onboard electronic tag (installed on the windshield) and the microwave antenna in the ETC lane, the system uses computer networking technology to perform backend settlement with banks. This allows vehicles to pass through toll stations without stopping to pay tolls, all based on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Reduces noise and exhaust emissions by avoiding stops at toll stations; Reduced wear and tear: Saves costs by minimizing frequent starts and brakes, lowering vehicle wear and fuel consumption; Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC faster, more advanced, and higher-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council's "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" explicitly states the goal of "achieving interoperability of transportation cards in key city clusters by 2020 and significantly increasing the proportion of vehicles equipped with ETC." It also sets a target of "50% ETC usage rate for road passenger vehicles by 2020" in the main indicators of the "13th Five-Year" comprehensive transportation development plan. More future possibilities: In addition to continuously improving the convenience of ETC installation and usage rates for passenger vehicles, future efforts will promote ETC adoption for trucks and explore deeper integration of ETC systems with smart transportation developments such as vehicle-to-vehicle communication and vehicle-road coordination. This will provide comprehensive travel services for vehicle owners, meaning more application scenarios will support ETC usage.

17

3

Share

Was the 2006 Vela equipped with an imported engine?

2006 Vela engine is not an imported engine, it was developed by Toyota and jointly produced with Tianjin FAW, with technology provided by Toyota. Therefore, this engine is a domestically produced engine. The engine model of the 2006 Vela is CA4GB2. The CA4GB2 engine has a maximum horsepower of 94 hp, a maximum power output of 68 KW, a maximum power speed of 6000 rpm, and a peak torque of 130 N.m. For the 2006 Vela engine, the following maintenance methods can be used daily: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid failures, change the oil regularly according to usage conditions and keep the oil volume moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to pass through the bypass valve and bringing dirt back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. When the amount is small, it remains suspended in the oil; when the amount is large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.

11

2

Share

What is the passing score for the driving test subject one?

The passing score for the driving license test subject one is 90 points, with a total of 100 questions. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the test consists of single-choice questions and true/false questions, each worth 1 point, totaling 100 points. If 11 questions are answered incorrectly during the test, the system will automatically submit the test and end the exam. Subject one, also known as the theoretical test or driver theory test, is part of the motor vehicle driving license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer with a time limit of 45 minutes. Subject one test content: driving license and motor vehicle management regulations; road traffic conditions and regulations; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject one test precautions: Candidates should pay attention to their attire during the test; no slippers are allowed, and electronic devices and bags are not permitted in the examination hall. Bring your ID card and queue up to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in the locker before entering the examination hall. Upon entering the examination hall, the identity verification area will assign a seat. After finding your seat, begin the test. Ensure the camera is aligned with you and follow the exam discipline. If you fail the first time, there is a retake opportunity on the same day. If you fail again, you will need to pay and reschedule. After the test, queue up to collect the score report and sign it. Failure to sign will render the test invalid. Subject one appointment: Candidates can make online appointments through mobile apps (iOS 15 or above, Traffic Management 12123 (V2.8.1B437) or Android 12 or above, Traffic Management 12123 (V2.8.1B274)). On the app's homepage, select "58 Car Test Appointment" and fill in the information as prompted. There is no limit to the number of times you can schedule the subject one test. Each subject can be taken once, and if you fail, you can retake it once. If you do not attend the retake or fail the retake, the test will be terminated, and the applicant must reschedule. For subject two and subject three, there are only five test opportunities, and subject two and subject three tests should be scheduled ten days later. If you fail the subject three safe and civilized driving knowledge test, the passed road driving skills test scores remain valid. The driving test consists of three subjects: subject one, subject two, and subject three. Subject one refers to the road traffic safety laws, regulations, and related knowledge test; subject two refers to the field driving skills test; subject three is divided into two parts: road driving skills and safe and civilized driving knowledge test. The safe and civilized driving knowledge test is conducted after subject three, so it is commonly referred to as subject four. However, in official terms (i.e., the Ministry of Public Security Order No. 123), there is no such thing as subject four.

5

Share

Can an Air Filter Be Reused?

It can be reused, but replacement is recommended. Using compressed air to blow it out or washing it with water can remove thick accumulated dust, but dust trapped inside the paper is difficult to clean thoroughly. The function of an air filter: to filter out particulate impurities in the air, ensuring that a sufficient amount of clean air enters the cylinder and preventing floating dust from being sucked into the engine, which accelerates the wear of the piston group and cylinder. According to the car's maintenance manual, the air filter should generally be replaced every 10,000 to 20,000 kilometers or every other maintenance interval. However, it is recommended to clean the air filter every 5,000 kilometers to reduce the formation of throttle sludge. The position of the car's air filter is determined by the intake form and the engine's structure. It is usually located in the air cleaner on the engine's intake pipe. There are two types of air filters in cars: dry and wet. Dry filters are made of paper or organic materials, while wet filters are made of metal mesh. Air filter: It is a type of filter, also known as an air cartridge, air cleaner, or style. It is mainly used in engineering vehicles, cars, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms as an air filter. During operation, the engine sucks in a large amount of air. If the air is not filtered, the suspended dust in the air will be sucked into the cylinder, accelerating the wear of the piston group and cylinder. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, which is particularly serious in dry and sandy working environments. The air cleaner is installed in front of the carburetor or intake pipe to filter out dust and sand particles in the air, ensuring that a sufficient amount of clean air enters the cylinder. Using an overly dirty air filter while driving can cause insufficient engine intake, leading to incomplete fuel combustion, resulting in unstable engine operation, reduced power, and increased fuel consumption. Therefore, the car's air filter must be kept clean. The car's air cleaner is a device that removes particulate impurities from the air, consisting of one or several air filter components. Its main function is to filter out harmful impurities in the air before it enters the cylinder, reducing early wear of the cylinder, piston, piston rings, valves, and valve seats. Therefore, before air enters the cylinder, it must first pass through the fine filtration of the air cleaner. An overly dirty air cleaner can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air cleaner, if it is found to have little dust and minor clogging, it can be cleaned by blowing it out with high-pressure air from the inside out and continue to be used. An overly dirty air cleaner should be replaced promptly.

13

3

Share

What type of batteries do Tesla electric vehicles use?

Tesla electric vehicles use ternary lithium batteries. The models under Tesla include: Tesla Roadster, Tesla Model S, Tesla Model X, Tesla Model S P85D, and Model Y. Taking Model Y as an example, its body dimensions are: length 4750mm, width 1921mm, height 1624mm, with a wheelbase of 2890mm. The total motor power of Model Y is 317kW, and the total motor torque is 545Nm, matched with a fixed gear ratio transmission.

2

5

Share

Is it necessary to shift gears after slowing down in a manual transmission car?

What Causes the Engine Warning Light to Illuminate in the Buick Excelle?

Can the ETC card be removed when not on the highway?

Was the 2006 Vela equipped with an imported engine?

What is the passing score for the driving test subject one?

Can an Air Filter Be Reused?

What type of batteries do Tesla electric vehicles use?

What does 'unreasonable intake camshaft phase sensor signal' mean?

Is It Normal for the Car to Shake When Reversing with Half-Clutch?

Should a Volvo use 92 or 95 octane gasoline?

What to Do If You Don't Want to Continue Studying After Passing Subject One?