Is it necessary to service a car every six months?

Does changing the owner's name count as a transfer?

Changing the owner's name does not count as a transfer. A transfer requires submitting the necessary documents, completing the relevant procedures, and registering. The required materials for a transfer include: Vehicle license: Motor vehicle registration certificate; Motor vehicle registration supplementary form; Vehicle purchase tax certificate; ID cards and household registration books of both the buyer and seller. If the buyer is from another region, a residence permit is required, and the buyer's residence permit must be valid for at least one year. The vehicle management office should review the submitted proofs and vouchers within one day from the date of acceptance, annotate the changes on the motor vehicle registration certificate, reclaim the license plate and vehicle license, determine a new motor vehicle license plate number, and reissue the license plate, vehicle license, and inspection certificate. "Motor Vehicle Registration Regulations" Article 19 If the motor vehicle is owned by two or more people and the name of the registered owner needs to be changed to another co-owner, an application for registration change can be submitted to the vehicle management office at the place of registration. When applying, all motor vehicle owners must jointly submit the application, confirm the application information, and provide the motor vehicle registration certificate, vehicle license, identity proofs of the owners before and after the change, and a notarized proof of co-ownership. However, if the vehicle is jointly owned by a married couple, a marriage certificate or a household registration book proving the marital relationship can be provided. The vehicle management office should review the submitted proofs and vouchers within one day from the date of acceptance, annotate the changes on the motor vehicle registration certificate, reclaim the license plate and vehicle license, determine a new motor vehicle license plate number, and reissue the license plate, vehicle license, and inspection certificate. If the residence of the new motor vehicle owner is not within the jurisdiction of the vehicle management office, the vehicle management offices of the departure and arrival locations should handle the registration change according to the provisions of Article 18.

2

Share

Can I replace the bulb if the car light is not bright?

Replacing the bulb is possible if the car light is not bright, but it can only provide a slight improvement in brightness, which is not very noticeable. After replacing the bulb, the light may still appear scattered and not focused. The original halogen lamp lens is designed specifically for halogen bulbs, with a lighting distance of about 20 meters. If you switch to an LED bulb, the brightness may improve slightly, but the lighting distance will still be limited to around 20 meters. Additionally, the halogen lens is not compatible with other types of bulbs, so the light will not be properly focused. Below are some additional methods for cleaning car lights on your own: Cleaning with water: Simply wipe the stains off the lamp cover with water, then use soapy water to clean any yellowed areas on the headlight. This will help prevent the headlight from yellowing over time. Using a polisher for restoration: This method can make the lamp cover appear brighter. Dip a clean sponge in some polishing compound and rub it on the car light. The effect will be quite noticeable after polishing, and it also acts as a protective layer for the lamp cover. Cleaning with toothpaste: Apply a small amount of toothpaste to the lamp cover and rub it in a circular motion. If there are noticeable scratches, you can add a bit more toothpaste and gently rub the area. After polishing, the car light will appear much clearer. Typically, it only takes about five to six minutes of rubbing before rinsing with clean water and drying with a soft cloth.

8

5

Share

How to Use Turn Signals in a Roundabout?

In a roundabout, the methods for using turn signals are as follows: 1. Changing lanes when entering the roundabout: Generally, vehicles turning left will try to choose the inner lane of the roundabout. Since the vehicle needs to move from the outer lane to the inner lane, the driver must use the left turn signal to alert vehicles inside the roundabout and those behind, indicating the intention to change lanes for a left turn and reminding others to yield. 2. Going straight when entering the roundabout: If the vehicle is going straight and does not need to change lanes, there is no need to use the left turn signal when entering the roundabout. However, when the vehicle is about to exit the roundabout to continue straight, since it needs to cross the right lane inside the roundabout, the driver should use the right turn signal to alert other vehicles and then exit the roundabout. 3. Turning right when entering the roundabout: If the vehicle intends to turn right toward another exit, it should naturally choose the rightmost lane of the roundabout. This situation is similar to the second case, and there is no need to use the left turn signal. After selecting the corresponding exit, the driver should use the right turn signal in advance, confirm safety, and then turn right to exit the roundabout.

19

1

Share

What is the method for testing engine cylinder pressure?

Thread the threaded pipe fitting into the spark plug hole, or press the conical rubber fitting of the cylinder pressure gauge tightly into the spark plug hole of the cylinder being tested. Start the engine for about two seconds, read the pressure value after the pointer stabilizes, then press the one-way valve button to release pressure and reset the pointer. Note that each cylinder should be measured at least twice, with the average value being the best. The cylinder consists of the following five components: 1. Cylinder barrel: The inner diameter of the cylinder barrel determines the output force of the cylinder. The piston must slide smoothly back and forth inside the cylinder barrel. 2. End cover: The end cover is equipped with intake and exhaust ports, and some also have a buffering mechanism inside. The rod-side end cover is equipped with sealing rings and dust rings to prevent air leakage from the piston rod and external dust from entering the cylinder. 3. Piston: The piston is the pressure-bearing component in the cylinder. To prevent air leakage between the two chambers of the piston, piston sealing rings are installed. The wear-resistant rings on the piston improve the cylinder's guidance, reduce wear on the piston sealing rings, and decrease friction resistance. 4. Piston rod: This is the most important load-bearing component in the cylinder, typically made of high-carbon steel with a hard chrome-plated surface, or stainless steel, to prevent corrosion and improve the wear resistance of the sealing rings. 5. Sealing rings: The sealing of components in rotary or reciprocating motion is called dynamic sealing, while the sealing of stationary parts is called static sealing.

20

1

Share

What to Do If You Scratch Someone Else's Car Paint?

You need to contact the car owner and the insurance company. If the damage is severe, you should also contact the traffic police. There are two methods for car paint spraying: 1. Base Coat: The pearl silver-pink base coat is applied in three layers. The first layer is a mist spray, where the spray gun moves quickly to create a thin, fog-like coating over the repair area or the entire car, ensuring the paint adheres to the primer. The second layer covers the primer or putty red-gray layer, revealing the color. Be careful to avoid issues like silver-pink paint spots or unevenness, and the spray gun can move slightly faster. The third layer corrects any unevenness or spots from the second layer. The goal is to achieve a uniform color coverage over the repair area or the entire car. 2. Clear Coat: After applying the base coat, allow it to flash dry for 5–15 minutes to let some solvents evaporate and the coating to dry. You can spray the clear coat when the base coat is dry enough that touching it lightly with a finger doesn’t leave color residue. If the base coat surface is rough or dusty, use a tack cloth and compressed air to wipe and blow off dust, then clean with a degreaser.

10

4

Share

Which is better for BMW 5 Series: 5W30 or 0W40?

When choosing the engine oil model for BMW 5 Series, you can consider various factors such as your driving habits and driving environment, and then select the appropriate engine oil. In most regions of China, using 5W30 engine oil is sufficient, unless in some particularly cold areas like Harbin in the north, where 0W40 engine oil is required. The following are the differences between 5W30 and 0W40: 1. Low-temperature performance: There are two suitable engine oil models for BMW X5, which are 5W30 and 0W40. These two have different high and low-temperature performance. 0W40 has better low-temperature fluidity, with a lower applicable minimum temperature, allowing driving in environments as cold as -35°C. 2. Fuel consumption: 0W40 engine oil has higher viscosity, better high-temperature protection performance, and sealing, but it also leads to increased fuel consumption. In other words, 0W40 can be used in a wider range of temperature environments.

12

2

Share

Is it necessary to service a car every six months?

Does changing the owner's name count as a transfer?

Can I replace the bulb if the car light is not bright?

How to Use Turn Signals in a Roundabout?

What is the method for testing engine cylinder pressure?

What to Do If You Scratch Someone Else's Car Paint?

Which is better for BMW 5 Series: 5W30 or 0W40?

Why is the reversing camera of Audi A4L not displaying?

What Procedures Are Required for an Off-Road Vehicle to Tow a Trailer?

What is the size of a roadside parallel parking space?

Is it a problem if the car doesn't stall after passing through deep water?