Is It Necessary to Replace the Transmission Filter?

1 Answers
OLila
07/29/25 9:24am
Transmission filters must be replaced, and they should be changed along with the transmission fluid. The reasons for replacing the transmission filter are: after prolonged wear and tear, the transmission accumulates many impurities. If the filter is not replaced regularly, it will affect the filtration efficiency, and the transmission fluid quality may deteriorate. The transmission filter, also known as the transmission screen, is installed inside the transmission and serves the following purposes: 1. It filters out oil contaminants and impurities in the transmission; 2. It protects the transmission. The consequences of a clogged transmission filter include: 1. Damage to the transmission solenoid valve; 2. Harsh gear shifts and delayed acceleration during gear changes.
Was this review help?
6
1
Share
More Forum Discussions

What are the three certificates required for driving a hazardous materials vehicle?

You need to hold a "Hazardous Materials Professional Qualification Certificate" as well as a vehicle license and a driver's license. The hazardous materials transport permit should be applied for at the county-level public security authority of the government at the place of departure or destination of the transport. Regulations related to hazardous materials transport vehicles: Road transport of hazardous materials must be equipped with transport and loading/unloading devices that ensure safety, and must have professional operational managers and drivers who understand the properties of hazardous materials to guarantee transport safety. Regulations on cargo loading for hazardous materials transport vehicles: If the cargo loaded on a hazardous materials transport vehicle exceeds the approved load capacity by less than 30%, 3 points will be deducted, and the vehicle will be impounded; if the cargo exceeds the approved load capacity by 30% or more, 6 points will be deducted, and the vehicle will be impounded. Highway ban times for hazardous materials vehicles: In most provinces, the ban is between 0:00 and 6:00 a.m. daily because the risks associated with hazardous materials transport are much higher than those of regular transport vehicles. Safe driving speeds for hazardous materials vehicles: Under no circumstances should the driving speed exceed 80 km/h. In conditions of low visibility such as nighttime, rain, fog, ice, or snow, the speed should be reduced.
6
2
Share

What type of fuel does the Audi A8 require?

Audi A8 requires fuel with an octane rating of 95 or higher. Precautions for refueling: 1. Choose to refuel when the temperature is relatively low; 2. If the car is not used for a long time or used infrequently, keep a small amount of fuel; 3. Do not refuel when a tanker truck is unloading fuel; 4. Turn off the engine when refueling a gasoline car. Taking the 2021 Audi A8 as an example, it is a large car with body dimensions of: length 5302mm, width 1945mm, height 1483mm, and a wheelbase of 3128mm. The 2021 Audi A8 is equipped with a 3.0T turbocharged engine, with a maximum horsepower of 286PS, maximum torque of 400Nm, maximum power of 210kW, and is paired with an 8-speed automatic transmission.
17
1
Share

What is the fuel tank capacity of the Atenza?

The fuel tank capacity of the Atenza is 56.2 liters, as officially announced. The Atenza uses 92-octane fuel, with a fuel consumption of 6.3-7.1L per 100 kilometers. A full tank can cover a distance of 791-892 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is recommended to refuel when there are only 2 segments left to avoid running out of fuel mid-journey. In actual refueling situations, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
13
3
Share

What is the method to reset the maintenance light on the 2018 Accord?

The method to reset the maintenance light on the 2018 Accord is: 1. Set the power mode of the Accord to ON; 2. Use the left selector wheel on the steering wheel to switch the instrument display to the warning message; 3. Press the left selector wheel to complete the reset. The 2018 Accord is a mid-size sedan with body dimensions of length 4893mm, width 1862mm, height 1449mm, and a wheelbase of 2830mm. Its curb weight is 1548kg. The 2018 Accord features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine producing a maximum horsepower of 146ps, a maximum power of 107kw, and a maximum torque of 175nm, paired with an electronic continuously variable transmission.
2
1
Share

How to Operate the Foot Brake in an Automatic Transmission Car?

The operation method of the foot brake in an automatic transmission car is: 1. Press the pedal all the way down with your left foot to activate it; 2. Press the pedal once more with your left foot and then release it to deactivate the foot brake. The principle of the foot brake: The foot brake generally refers to the brake, which distributes oil or air from the master cylinder to the brake cylinders of each wheel, then pushes the brake pads to rub against the brake disc, thereby achieving the purpose of deceleration or stopping. The steps to start an automatic transmission car are: 1. Turn the ignition key to the power position; 2. Press the foot brake and shift the gear from P to N; 3. Release the foot brake to start the engine; 4. Warm up the car while stationary; 5. Press the foot brake and shift the gear from N to D, then release the handbrake; 6. Slowly release the foot brake and smoothly press the accelerator to start.
9
3
Share

Can the Great Wall Pao be Converted into a Passenger Vehicle?

Great Wall Pao cannot be converted into a passenger vehicle. Taking the 2020 Great Wall Pao as an example, its body dimensions are: length 5437mm, width 1958mm, height 1893mm, wheelbase 3230mm, minimum ground clearance 228mm, and fuel tank capacity 80l. The 2020 Great Wall Pao features a double-wishbone independent front suspension and a multi-link solid axle non-independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 190PS, maximum torque of 360Nm, and maximum power of 140kW, paired with an 8-speed automatic transmission.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.