Is it necessary to replace the fallen sound insulation cotton under the Civic chassis?

1 Answers
AngelaAnn
07/30/25 5:55am
It is necessary to replace the fallen sound insulation cotton under the Civic chassis. The sound insulation cotton can reduce the noise transmitted to the car during driving, making the ride more comfortable. Here is some extended information: 1. Introduction to sound insulation cotton: The sound insulation cotton has good thermal insulation effect. After being pasted inside the car hood, it can effectively prevent the high temperature of the engine from being directly transmitted to the hood, thereby protecting the paint on the hood surface and avoiding the foggy vision caused by the hood on rainy days. 2. Functions: After sound insulation is applied to the doors, the hollow cavities inside the doors are effectively filled, making the sound of closing the doors softer. After sound insulation is applied to the front and rear covers, firewall, and floor, the deafening valve sound of the engine is filtered out. Most of the tire noise and road noise are suppressed at low speeds, and there is still some room for improvement in speed. The stability of the car is greatly increased, and the shock absorption and cushioning performance are significantly improved. It reduces and effectively alleviates the metal fatigue of the chassis, extending the service life of the car body.
Was this review help?
1
5
Share
More Forum Discussions

What does engine ECU mean?

Engine ECU is the abbreviation for Electronic Control Unit, also known as the vehicle's onboard computer. As one of the core components of modern automotive electronics, there may be several ECU electronic control units in a car, each managing different functions, and these ECU systems exchange information with each other. An engine is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, Stirling engines, steam engines, jet engines, electric motors, etc. For example, an internal combustion engine typically converts chemical energy into mechanical energy. The term engine can refer to both the power generation device and the entire machine including the power unit.
5
0
Share

What are the 8 fuel-saving methods for older cars?

The 8 fuel-saving methods for older cars include minimizing brake usage, reducing throttle input, and coasting in neutral at higher speeds. Below are precautions regarding automobile engine usage: 1. Avoid coasting in neutral: The engine inherently features fuel-cut during deceleration, making neutral gear counterproductive for fuel economy. 2. Maintain vigilant observation during vehicle operation: If oil stains are detected on the ground, promptly assess whether engine oil leakage has occurred and consult with the authorized 4S dealership to eliminate potential safety hazards. 3. Avoid immediate engine shutdown: For turbocharged vehicles, refrain from turning off the engine immediately after high-speed driving or hill climbing. Allow 10 minutes of idling before shutdown, as turbocharged engines accumulate carbon deposits several times faster than naturally aspirated engines. 4. Replace or filter brake fluid: When brake fluid becomes contaminated with water or contains visible impurities/sediment, promptly replace or thoroughly filter it to prevent insufficient braking pressure that may compromise braking performance.
10
5
Share

Can Dry Dual-Clutch Transmissions Not Handle Water? What About Driving in the Rain?

Dry dual-clutch transmissions cannot handle water, and driving in the rain may cause damage. Here is more information about clutches: 1. Functions: (1) Gradually increase the driving force of the car for a smooth start; (2) Temporarily separate the engine and transmission for gear shifting; (3) Prevent overload in the transmission system; (4) Reduce torsional vibration impacts from the engine, extending the lifespan of transmission gears. 2. Structure: Friction clutches are the most widely used type, typically consisting of four parts: the driving section, driven section, pressing mechanism, and control mechanism. 3. Working Principle: Generally divided into the engaged state and disengaged state. The flywheel is fixed to the crankshaft, the pressure plate is fixed to the flywheel, and the clutch disc is sandwiched in between. Under normal conditions, the clutch disc is tightly pressed by the pressure plate, and as long as the engine is running, power is continuously transmitted to the transmission (in neutral). When shifting gears, pressing the clutch pedal separates the pressure plate, cutting off power output.
18
1
Share

Why does the brake feel spongy?

There are many reasons for spongy brakes, including excessive wear of brake pads, lack of brake fluid, or blockage of brake lines. When a car experiences spongy brakes while driving, it is essential to stop and inspect promptly to prevent potential safety hazards during operation. Braking, also known as deceleration, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, and other transportation tools or machinery. The general principle of braking involves fixing a wheel or disc on the high-speed shaft of the machine and installing corresponding brake shoes, bands, or discs on the machine base, which generate braking torque under external force.
19
3
Share

Should You Shift to D Gear First or Release the Handbrake First?

Generally, you should shift gears first and then release the handbrake last. Below is a detailed introduction to the various gears of an automatic transmission car: 1. Gear Shifting Steps: When starting the car, shifting from P to D passes through R, which causes a reverse impact on the transmission, potentially damaging it over time. The correct method is to turn on the power, press the brake, shift to N, start the engine, and then shift to D. 2. P Gear: This is the parking gear, which uses a mechanical device inside the transmission to lock the rotating parts of the car. It must only be used when the vehicle is completely stopped. Additionally, the gear must be in P when turning off the engine. 3. N Gear: This is the neutral gear, typically used for short stops. In neutral, your right foot can rest off the brake pedal. However, on slopes, you must still press the brake to prevent rolling unless the handbrake or electronic brake is engaged.
15
3
Share

Why does the right side of the car go out of line when reversing to the left?

The reason why the right side of the car goes out of line when reversing to the left is likely due to turning the steering wheel too late or returning the steering wheel too late. Below is an introduction to the relevant driving test subjects: 1. Subject One: Road traffic safety laws, regulations, and related knowledge test. The structure of the test question bank and basic question types are formulated by the Ministry of Public Security, while provincial-level traffic management departments under the public security authorities establish the test question bank for their respective provinces (autonomous regions, municipalities) based on local conditions. 2. Subject Two: Field driving skills test, which includes: reversing into a parking space, stopping and starting on a slope, making a right-angle turn, driving through curves, and parallel parking. 3. Subject Three: Road driving skills test, which includes basic test items such as preparing to start, driving straight, changing lanes, passing through intersections, parking by the roadside, crossing pedestrian crossings, passing through school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and night driving. 4. Subject Four: Safe and civilized driving knowledge, test items: knowledge related to safe and civilized driving.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.