···
Log in / Register

Is it necessary to replace halogen car lights?

4 Answers
StValeria
07/29/25 5:26am

Whether halogen lights need to be replaced depends on personal needs. If you want higher brightness, you can replace them; if you want stronger light penetration, then don't replace them. Although halogen lights are not very bright and their illumination effect is not the best, their light penetration is very strong, surpassing that of brighter xenon and LED lights. This makes them more visible to other vehicles in heavy rain, snow, or fog, enhancing driving safety. Information about halogen car lights is as follows: 1. Halogen car lights are a new generation of incandescent lamps, filled with halogen elements such as bromine and iodine or tungsten halides. To improve the luminous efficiency of incandescent lamps, the temperature of the tungsten filament must be increased, but this will correspondingly cause tungsten to sublimate and condense on the glass shell, turning it black. 2. Halogen car lights can also operate at higher temperatures than ordinary incandescent lamps, making them brighter and more efficient. However, at these temperatures, ordinary glass may soften, so halogen car lights require the use of quartz glass with a higher melting point.

Was this review help?
2
3
Share
VictoriaRose
08/12/25 7:21pm

I've been driving trucks for over 20 years, hauling goods on night routes every day. Halogen lights work fine in the city, but they're not bright enough on remote mountain roads, and visibility gets even worse in foggy conditions. After frequent accidents last year, investigations revealed insufficient halogen brightness was a hidden danger. After switching to LED lights, the brightness improved significantly, making driving much safer. If you often drive at night or go to areas with poor lighting, upgrading is essential—safety comes first. Halogen lights are cheap with low initial costs, but LEDs last longer and are more energy-efficient, making them more economical in the long run. Don't overlook this simple upgrade—it reduces accident risks and enhances safety.

Was this review help?
3
5
Share
Expand All
LilyAnn
10/03/25 6:30am

As a budget-conscious homemaker, I deliberated for a long time before replacing the lights on my family SUV. Halogen bulbs are cheaper to replace but consume more electricity. I did the math: an LED kit costs around 300 yuan and lasts five to six years, while halogens add a few extra yuan to the monthly electricity bill and need replacing every six months. After the switch, I found it truly saved money, and the lighting became brighter—no more worries when driving my kids to night tutoring. From an investment return perspective, if the halogen bulbs are still bright enough, there's no rush to replace them. But if they're aging or you frequently drive at night, upgrading to LEDs is definitely cost-effective—it's worry-free and reduces costs.

Was this review help?
8
3
Share
Expand All
VonJameson
11/16/25 8:10am

I have a decade of experience in car modifications. Halogen lights are outdated, with brightness around 500 lumens; LEDs exceed 2000 lumens, start quickly, and have a long lifespan. Don't rush into replacement—matching the interface is crucial, and some cars require adapters for heat dissipation. If you feel your visibility is poor or the lights are yellowing, upgrading to LEDs is worthwhile. Installation is simple—try it yourself or visit a professional shop. Overall, halogens are adequate but not optimal; new lights enhance the driving experience.

Was this review help?
12
0
Share
Expand All
More Forum Discussions

How to Remove the Rear Tail Light of Hanteng X7?

The method for removing the rear tail light of Hanteng X7: 1. Open the trunk and first remove the inner lining cotton on one side of the rear tail light. Use a small flat-head screwdriver to pry open the clips of the inner lining cotton and pull it down. Note that the prying action should be slow to avoid damaging the plastic clips. 2. There are a total of three nuts fixing the rear tail light. Take out the small ratchet and fit it with an 8mm socket, then remove the three fixing nuts one by one. 3. Unplug the tail light wiring harness connector. If it is difficult to unplug, gently pry it with a small flat-head screwdriver. 4. Hold both sides of the rear tail light with both hands and gently pull outward to remove the rear tail light. The Hanteng X7 is a compact SUV equipped with a 1.5T turbocharged engine, with a maximum power of 115kW. The car's dimensions are 4671mm in length, 1902mm in width, and 1697mm in height, with a wheelbase of 2810mm. The body structure is a 5-door, 5-seater.
10
0
Share

What should be paid attention to when reversing into the garage?

Precautions for reversing into the garage: 1. There is a key point when reversing into the garage, which is to keep the body 30 centimeters away from the garage corner. 2. During the reversing process, step on the clutch properly and maintain a steady speed. 3. Turn the steering wheel to the maximum as early as possible, not too late. 4. The car body must be fully inside the garage. 5. After the car body is in the garage, pay attention to the rearview mirrors on both sides to adjust the body position. Turn the steering wheel towards the side where the rear is wider. Introduction to reversing into the garage: 1. Reversing into the garage is a mandatory test item for obtaining a small car driver's license after 2013. It assesses the driver's ability to operate the car in a confined space. Reversing into the garage is a key assessment point in the driver's test, which involves correctly reversing the vehicle into the garage from both sides while moving. 2. There is a time limit for reversing into the garage during the test, which is 210 seconds.
7
1
Share

How to Set One-Touch Up/Down for Mistra?

Activation method for Hyundai Mistra's one-touch window control: Some models require manual activation. For the window switch on the armrest, first start the vehicle. Press and hold the button down for 5 seconds, then pull it up for 5 seconds. The system will complete recording and successfully activate. Below are instructions about Hyundai Mistra's one-touch window function: 1. Opening windows (one-touch down) a) Press the button to the first detent and release when reaching desired position. b) Press harder to the second detent - windows will automatically roll down completely. 2. Closing windows (one-touch up) a) Pull the button to first detent (harder pull reaches second), release when windows reach desired position. b) Slightly harder pull to second detent - windows will automatically roll up. Additionally, owners can control windows via key fob: Hold the lock button for ~3 seconds to synchronously raise all windows; hold unlock button for 3 seconds to automatically lower all windows.
2
1
Share

Are Car Cigarette Lighters Universal?

Car cigarette lighters are universal, but it is recommended that car owners choose the appropriate cigarette lighter to avoid abnormalities during use that may affect driving safety. When selecting a cigarette lighter, pay attention to its allowable current to prevent circuit overload during use. The functions of a car cigarette lighter are as follows: 1. Car Charger: While driving, if your phone runs low on battery, you can charge it via the cigarette lighter, providing convenience for passengers. 2. Car Inverter: A car inverter can convert the vehicle's 12V voltage to 220V, allowing passengers to use it, which is particularly convenient for those who enjoy road trips without affecting normal usage. 3. Car Air Pump: Long-distance drivers may need an air pump. If a tire gets punctured halfway, they can directly replace and inflate the inner tube without the hassle of changing to a spare tire, saving time for long-distance drivers. 4. Car Heated Cup: Car heated cups are also quite common in many drivers' vehicles. By connecting to the car cigarette lighter, drivers can have hot water to drink while driving, especially useful in colder weather. 5. Car Dash Cam: A dash cam is an essential safety accessory for driving, and it can also be powered via the cigarette lighter.
1
3
Share

Why Is There a Rattling Sound from the Right Rear Wheel of the Car?

Reasons for the rattling sound from the right rear wheel of the car: 1. If the right rear wheel of the car is severely worn, with bulges or out-of-round conditions on the tire, a rattling sound will occur while driving. In this case, the tire should be repaired or replaced promptly to avoid safety hazards. 2. If the brake pads on the right rear wheel are severely worn, they will produce abnormal noises due to friction. 3. Damage to the right rear shock absorber of the car, mainly including damage to the plane bearing, ball joint, or spring. 4. If there are foreign objects attached to the right rear wheel, abnormal noises will naturally occur while driving.
14
3
Share

How Many Months Beyond the Norm is Considered a Stock Vehicle?

Stock vehicles refer to those that remain unsold in inventory. As for what constitutes a stock vehicle and the duration of stock time, there are no explicit legal definitions or boundaries. Generally, it is considered a stock vehicle if it has been in inventory for 3 to 6 months after leaving the factory. Some may exceed 6 months or even a year, with extreme cases lasting several years. When picking up a vehicle, it is crucial to conduct a thorough inspection to avoid receiving a stock vehicle. Pay attention to the following points during the inspection: 1. Check the production dates of the tires and glass; significant discrepancies may indicate issues. 2. Ensure there are no scratches on the exterior and no stains on the interior. 3. Start the vehicle to check if the lights, electronic instruments, wipers, turn signal levers, dashboard, etc., are functioning properly. 4. Inspect the trunk to confirm the completeness of tools, such as the warning triangle, spare tire, etc.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.