Is It Necessary to Replace a Cracked Windshield?

3 Answers
Gertrude
07/29/25 8:12pm
It is necessary to replace a cracked windshield. The specific reasons are as follows: 1. The crack may expand: Cracks can continue to spread due to factors such as temperature changes, high-speed driving, and road bumps. 2. Affects the driver's vision: It may further threaten the safety of the driver and passengers in the vehicle. Relevant information about car windshields is as follows: 1. Windshield: Refers to the glass component in a car that blocks wind. 2. Function: The "cleanliness" of the car windshield can determine the clarity of the driver's vision; the quality of the car windshield is closely related to the driving safety of the driver.
Was this review help?
16
1
Share
DelJoel
08/14/25 4:32pm
I believe it's necessary to consider replacing a cracked windshield, especially if the crack is relatively large or located in the central area of the driver's line of sight. I've encountered this situation myself while driving—it started as a small crack, but after a few bumps on the highway, it expanded, almost obstructing my view. This can compromise visibility and safety, as flying debris poses a serious risk. In the event of a collision, shattered glass loses its protective function. Weather changes can also accelerate crack growth, particularly with the expansion and contraction caused by summer heat. Repairs are only a temporary solution; if the crack is long or deep, a full replacement is necessary. For safety's sake, don't take it lightly—visit a professional shop for an inspection as soon as possible. If it can be repaired, do so; if it needs replacing, replace it. The cost is worth it, as driving safety should never be overlooked.
Was this review help?
10
2
Share
Expand All
Young
10/16/25 3:05am
I also struggled with whether to replace a cracked windshield and eventually decided it depends on the situation. If it's just a small crack, like smaller than a coin, professional repair is definitely worth trying—it's much cheaper than replacing the entire windshield, saving you hundreds. I've used a repair kit myself, and the results were decent, but only if the crack is clean and hasn't absorbed moisture, otherwise the repair fluid won't work. However, if the crack is long, say longer than a finger, or if there are multiple intersecting cracks, it's better to replace it to avoid the risk of shattering at high speeds. Also, be mindful of parking conditions—avoid extreme heat or cold to prevent worsening the issue. From a cost perspective, getting a professional assessment first is the smart move—don't rush into a decision.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

What documents are needed to apply for a temporary license plate for a new car?

Documents required to apply for a temporary license plate for a new car: 1. Original and photocopy of the vehicle certificate of conformity; 2. Original and photocopy of the third copy of the compulsory traffic insurance; 3. Original and photocopy of the first copy of the car purchase invoice; 4. Original and photocopy of the owner's identity proof; 5. For non-local owners, original and photocopy of the owner's temporary residence permit. After gathering all the required documents, go to the traffic management department to fill out the temporary license plate application form, then submit the application at the counter and receive the temporary license plate. There are four types of temporary license plates: temporary license plates for cross-administrative districts, temporary license plates for administrative districts, temporary license plates for special-type motor vehicles, and temporary license plates for testing purposes.
3
0
Share

How to Remove Paint Dots from Car Body?

Methods for removing paint dots from car body: 1. Use a mixture of soap, ammonia, and turpentine in appropriate proportions to remove many stains from glass; 2. Repeatedly stick and peel transparent tape to remove some stains; 3. Use a 4B drawing eraser to wipe off the paint; 4. If possible, use a dedicated cleaner for wiping; 5. First, use a hair dryer to dry the area, then scrape it off; 6. Alcohol can also be used for removal—dip a soft cotton cloth in alcohol and gently wipe the paint; 7. Banana oil can also be used—dip a towel in banana oil and gently wipe the paint dots to dilute the paint, which is highly effective for cleaning paint spots. Finally, rinse with clean water.
9
0
Share

Where is the blower resistor located in an Audi A4?

The blower resistor is located inside the blower assembly in the cabin and serves as a switch to regulate the fan speed. Function of the vehicle blower: When the blower is turned on, if the temperature is set to the lowest setting, the external circulation mode will draw in natural air from outside the vehicle, though slightly warmer. The air intake for the external circulation is typically located between the windshield lower edge and the engine compartment, which introduces some heat from the engine bay. In internal circulation mode, the air blown out will be at the temperature of the cabin. Components of the vehicle blower: The blower mainly consists of the following six parts: motor, air filter, blower body, air chamber, base (also serving as the oil tank), and oil drip nozzle.
1
4
Share

What are the reasons for insufficient battery power in Volkswagen vehicles?

Volkswagen battery power insufficiency can be attributed to vehicle quality issues and personal usage problems. Personal usage problems: Short driving distances leading to insufficient battery charging, prolonged use of high-power electrical appliances, and electrical devices left on after the vehicle is locked. Vehicle quality issues: Battery quality problems resulting in insufficient power storage, short circuits or open circuits between battery poles, loose battery terminal clamps, vehicle body leakage. Regarding the issue of indicator lights being on, since the actual vehicle cannot be seen, an accurate fault diagnosis cannot be made. If this problem is not resolved through this answer, it is recommended to report it to the manufacturer and wait for their response and handling.
10
2
Share

What are the causes of oil leakage from the oil pan of a BMW 525 engine?

BMW 525 engine oil pan leakage can be caused by aging seals, insufficiently tightened oil pan screws, and severe external impact collisions. Poor sealing or aging of the gasket or sealing strip: Sealing strips exposed to high temperatures for extended periods can age, leading to cracking, which makes oil leakage a common occurrence. Insufficiently tightened oil pan screws: If the oil pan screws are not tightened sufficiently, the seal between the engine block and the oil pan deteriorates, resulting in oil leakage from the oil pan. Severe external impact collisions: After a severe external impact collision, the sealing performance of the oil pan may degrade or the pan may crack, leading to oil leakage.
20
2
Share

Why does the Subaru Outback key light stay on?

Subaru Outback key light stays on due to an anti-theft system malfunction. Fuel warning light: When this indicator light stays on, it indicates low fuel level and it's best to refuel promptly. During vehicle startup when the system performs self-check, this light will illuminate briefly before turning off. To preserve fuel pump lifespan, refueling should ideally occur before the fuel warning light activates. Door open indicator: If any door isn't properly closed, the corresponding indicator light on the display will illuminate. Seatbelt indicator: The seatbelt indicator on the car dashboard shows whether seatbelts are locked. When illuminated, it means seatbelts aren't properly fastened. Some models will emit warning sounds. The indicator automatically turns off when seatbelts are properly fastened.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.