Is it necessary to repair scratched brushed wheels?

1 Answers
LeJasmine
07/30/25 6:39am
It is necessary to repair scratched wheels. The following introduces the methods for repairing scratched wheels and the impacts of not repairing them: Methods for repairing scratched wheels: Clean the dirt from the scratched area to avoid mixing impurities during painting. If the scratch is deep, use sharp tools to clean it. To minimize damage to the tire surface, apply a professional cleaning agent to the scratched area. Finally, fill the scratch with putty until the surface dries, then repaint it. Impacts of not repairing scratched wheels: If scratched wheels are not repaired, it will affect the appearance. Unrepaired scratches can also impact vehicle performance. As the internal support part of the tire, wheels are usually very hard. However, once damaged, it indicates severe friction has occurred. If not repaired, it can cause serious damage to the alloy part and even affect the vehicle's stability.
Was this review help?
4
0
Share
More Forum Discussions

How to adjust the time on a Toyota Camry?

Camry 19 model dashboard time adjustment method: 1. Turn the key to the ACC position or remove it, the dashboard will turn off. 2. Turn the light switch to turn on the small lights. 3. At this time, the dashboard background light will also light up. 4. Press and hold the dashboard button for a while, the hour area on the dashboard will start flashing, release the button and press it again, each press increases the hour by one. 5. After adjusting the hour, do not touch the button, the hour will flash 5 times and then automatically switch to minutes. Each press of the button increases the minute by one, holding it down will continuously increase. After adjustment, do not touch it, the minute count will flash 5 times and then stop, the time is now adjusted.
3
2
Share

How Often Should a Magotan Undergo Major Maintenance?

Magotan vehicles require major maintenance every 60,000 kilometers. Below are details regarding the maintenance: 1. Maintenance items include replacing engine oil and oil filter, air filter, fuel filter, cabin air filter, brake fluid, transmission fluid, and spark plugs. Additionally, fuel additives should be used. 2. The purpose of maintenance is to promptly identify potential issues with the vehicle, preventing unexpected incidents while driving. 3. Major maintenance builds upon minor maintenance, adding air filter and fuel filter replacements to the standard oil and oil filter changes. These two filters serve to remove dust from the air and impurities from the fuel. The proper functioning of the engine relies on the correct use of various maintenance products. Failure to replace the oil and three filters (oil, air, and fuel) in time can adversely affect engine performance.
14
4
Share

Can a BMW still be driven with zero tire pressure?

It is possible to drive a BMW with 0bar tire pressure, as long as the speed does not exceed 80 km/h. Tire Pressure Monitoring: Tire pressure monitoring involves real-time automatic monitoring of tire pressure during vehicle operation, with alerts for tire leaks and low pressure to ensure driving safety. There are three commonly used tire pressure monitoring methods: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. When tire pressure is too low or there is a leak, the system will automatically issue an alert. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to other wheels. By comparing the differences in rotation speeds between tires, the system monitors tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of tires to monitor pressure. Tire Pressure Monitoring System (TPMS) Introduction: This system combines the advantages of both the above systems. It equips direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Compared to using only direct systems, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time data on the actual pressure in all four tires as a direct system can.
17
4
Share

When was the 14th-generation Sylphy launched?

The 14th-generation Sylphy was already launched in 2019. Here are the relevant details about the Sylphy: 1. Powertrain: It is equipped with a 1.6L naturally aspirated engine that complies with the China VI emission standards, delivering a maximum power of 99kW (135 horsepower) and a peak torque of 159Nm. The transmission system is paired with a CVT gearbox. 2. Smart Features: The new vehicle comes with the latest Nissan-Connect super-intelligent system, featuring an 8-inch HD capacitive touchscreen. This system includes functions such as voice control for the vehicle and remote control of the vehicle. The voice control allows for basic operation of the vehicle's online entertainment system, all-time online navigation system, Bluetooth phone, driving recorder, and air conditioning through simple voice commands. The remote monitoring and control function enables seamless connection with a smartphone via a smart app, allowing users to stay fully informed about the vehicle's status and remotely control the door locks, lights & horn, engine, and air conditioning based on specific needs.
14
0
Share

What is the maintenance interval for the Hongqi HS5?

The maintenance interval for the Hongqi HS5 is every 10,000 kilometers or once a year. Generally, it includes replacing engine oil, oil filter, air filter, cabin air filter, etc. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent failures, and extend the service life. Below are some maintenance precautions for the Hongqi HS5: 1. Change engine oil and oil filter (using the oil provided by the 4S store is sufficient). 2. Clean the air filter and cabin air filter, check if the brake fluid, antifreeze, and power steering fluid are sufficient, and top up if needed. 3. Check the chassis and suspension for any abnormal oil leakage or looseness (including tire pressure). 4. Check if all lights are functioning properly. 5. Inspect the wear condition of the brake pads. 6. Measure the battery voltage to ensure it is normal.
20
1
Share

What does car DSP mean?

Automotive DSP, the full name is Digital Audio Processor, DSP is the abbreviation of Digital-Signal-Processing in English, which translates to: digital signal processing. Here is some relevant information: 1. The function of DSP is to control frequency response, which can achieve certain processing and modification of audio signals. For example, when we listen to songs, there are different options such as bass, pop, rock, blues, etc. After selecting them, the tone and sound of the song will be different. This is the role of DSP. 2. It can be understood this way: music is an audio signal, and the audio signal comes from the car host, CD player, navigation, etc. The audio signal is played through the amplifier from the speaker, and it needs to be modified by DSP in the middle. If the audio source is the first step and the amplifier is the last step, then DSP is in between the two. But it should be noted that even though DSP can "modify" the sound, if the original sound quality is poor, no matter how much "modification" is done, there will not be much change.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.