Is it necessary to repaint a scratched door handle?

2 Answers
LeColin
07/29/25 4:36am
It is necessary, as untimely car paint repair can quickly lead to rust. Severe rust on a car can reduce the body's rigidity and strength, causing more serious damage and deformation in the event of an accident, which poses a significant safety hazard for driving. More extended information is as follows: 1. Overview: The primary function of car paint is to protect the vehicle body from corrosion. Additionally, car paint enhances the vehicle's aesthetic appeal. Car paint is also a type of coating. The purpose of a spray booth is to provide a clean, safe, and well-lit painting environment for car painting operations, ensuring that the spraying process is free from dust interference and guarantees the quality of the paint job. 2. Composition: Car paint mainly consists of resin, pigment, additives, fillers, curing agents, solvents, etc. Metallic car paint typically includes reflective metal flakes (aluminum powder), while pearlescent paint usually contains mica particles.
Was this review help?
20
2
Share
StKaden
08/12/25 8:18am
I got my door handle scratched while driving, and I'm really torn about whether to repaint it. From a financial perspective, the cost of repainting might not be high. If I buy a touch-up pen or go to a small repair shop, it might cost anywhere from a few dozen to a few hundred yuan. However, if the scratch is shallow and only on the surface, leaving it as is might not be a big deal and won’t affect driving. Still, I recommend first checking the depth of the scratch: if it reaches the metal layer, it’s prone to rust, especially in rainy or humid weather. Once rust spreads, it could lead to bigger damage and higher repair costs. My personal opinion is that if the car is relatively new, it’s best to repaint it promptly. For long-term use, consider your budget and opt for a cheaper fix to prevent further deterioration. In short, weigh the costs and risks carefully and avoid making impulsive decisions.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

What is the reason why the Audi A6 air conditioning is not cooling?

Audi A6 air conditioning is not cooling due to: 1. Air conditioning system leakage, refrigerant impurity or deterioration; 2. Clogged car air filter; 3. Condenser mold or surface dirt. Car air conditioning refers to the air conditioning device installed in the car, which can cool, heat, ventilate and purify the air in the compartment, providing a comfortable riding environment for passengers, reducing driver fatigue and improving driving safety. Take the 2021 Audi A6 Avant Pioneer 40TFSI Luxury Dynamic as an example: it is a medium and large 5-door 5-seat station wagon with a length, width and height of 4951mm, 1886mm, 1483mm respectively, a wheelbase of 2925mm, equipped with a 7-speed dual-clutch transmission, and a top speed of 232 kilometers per hour.
8
4
Share

What Causes the Engine SPN Fault?

Dashboard faults are generally caused by engine issues, oil system malfunctions, or battery and charging system problems. Below are solutions for dashboard faults: 1. Immediate repair: Fault-related indicators on the car dashboard, including the engine (exhaust system) warning light, oil system warning light, and battery/charging system warning light, rarely illuminate under normal circumstances. However, if they light up, it indicates that the vehicle has developed a corresponding fault or abnormality. Minor issues may affect driving safety, while major ones could potentially damage the vehicle. Immediate inspection and repair are required, or contact the brand's 4S dealership for service. 2. Can continue driving: If the engine warning light on the dashboard illuminates, the vehicle can still be driven. The engine warning light is yellow, serving as a reminder to the driver that the engine may have a fault requiring inspection. If a red light appears on the dashboard, the vehicle must not be driven further. It should be promptly parked in a safe area or towed to a repair shop for servicing.
18
5
Share

How to Reset the Oil Maintenance Light on a Chevrolet Captiva?

To reset the oil maintenance light on a Chevrolet Captiva, follow these steps: 1. Press and hold the reset button A while stepping on the brake pedal; 2. Turn the ignition switch to the 'on' position without starting the engine; 3. The characters 'INSP' will flash or the display will blink; 4. Continue holding down the reset button A; 5. Release the reset button A and then release the brake pedal; 6. Turn the ignition switch back to the 'off' position to complete the reset process. Taking the 2017 Chevrolet Captiva as an example: It is a mid-size 5-door, 5-seat SUV with dimensions of 4690mm in length, 1849mm in width, and 1753mm in height, a wheelbase of 2707mm, equipped with a 6-speed automatic transmission, and a top speed of 175 kilometers per hour.
8
5
Share

What causes poor air conditioning cooling in Honda XRV?

Here are the specific reasons for poor air conditioning cooling in Honda XRV: 1. Insufficient or low refrigerant: This may be caused by minor refrigerant leakage. You can observe through the sight glass on the dryer tank. During normal operation, if continuous bubbles appear in the sight glass, it indicates insufficient refrigerant. If obvious bubble flipping occurs, it means the refrigerant is severely insufficient. In this case, simply adding refrigerant will solve the problem. 2. Loose compressor drive belt: If the drive belt is loose, the compressor will slip during operation, leading to reduced transmission efficiency and decreased compressor speed. This results in reduced refrigerant compression delivery, causing the car air conditioner to stop cooling. If the compressor drive belt is too loose, it should be tightened. If the belt cannot be turned by hand, it indicates excessive tightness and should be slightly loosened. If tightening is ineffective or the belt shows cracks, aging, or other damage, a new drive belt should be replaced.
14
1
Share

What Are the Types of Automotive Turbocharging?

Types of automotive turbocharging: 1. Mechanical supercharging system: This device is installed on the engine and connected to the engine crankshaft via a belt. It derives power from the engine output shaft to drive the supercharger's rotor, thereby pressurizing air and blowing it into the intake manifold. 2. Pressure wave supercharging system: Utilizes the pulse pressure waves of high-pressure exhaust gases to force air compression. This system offers excellent supercharging performance and acceleration but is relatively bulky, making it less suitable for compact cars. 3. Exhaust gas turbocharging system: The turbocharger has no mechanical connection to the engine and essentially functions as an air compressor, increasing air intake by compressing air. 4. Compound supercharging system: Combines exhaust gas turbocharging and mechanical supercharging. This setup is more commonly used in high-power diesel engines, delivering substantial engine output power, low fuel consumption rates, and minimal noise. However, its complex structure, high technical requirements, and challenging maintenance make it difficult to popularize.
18
0
Share

Why does the car jerk when accelerating while driving?

Long-term short-distance driving, poor air and fuel quality, and an older vehicle. Below is relevant information about refueling cars: Precautions: Before driving, check the fuel gauge and calculate whether refueling is needed during the trip based on the distance and the fuel gauge reading. It's advisable to refuel in advance rather than waiting until the fuel warning light comes on. The fuel pump is located inside the fuel tank and operates at high temperatures during continuous use. Being submerged in fuel helps effectively cool it down. Reminder: When the fuel warning light comes on, it indicates the fuel level is below the fuel pump. Consistently waiting until the light comes on to refuel will shorten the fuel pump's lifespan. Too little fuel in the tank may even cause the fuel pump to burn out. It's better to refuel in the morning or evening, avoiding the hot midday sun and high temperatures. This is because gasoline is billed by volume rather than weight, and it expands with heat and contracts with cold.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.